Add 3D Architectures

vtr_flow/arch/multi_die/README.md

@@ -0,0 +1,39 @@
+# 3D FPGA Architectures
+
+This directory contains architecture files for 3D FPGAs. The architectures are divided into three sub-directories:
+
+1. **koios_3d:**
+- Contains architecture files based on the [k6FracN10LB_mem20K_complexDSP_customSB_22nm](../COFFE_22nm/k6FracN10LB_mem20K_complexDSP_customSB_22nm.clustered.xml) architecture, utilized in Koios benchmarks.
+- Inside the architecture file, the fabric with multiple sizes based on the sector size is defined.
+- Routing resource and switch delays in this architecture are configured for 7 nm technology. The inter-die connection delay is 73 ps.
+- Detailed information on how these delays are obtained can be found in the paper "Into the Third Dimension: Architecture Exploration Tools for 3D Reconfigurable Acceleration Devices," presented at FPT '23.
+- **Architectures:**
+   - `3d_full_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml`
+     - The inter-die connection is only from output pins, with all output pins connected to the channel on the same die and the other.
+     - Inside the architecture file, the fabric with multiple sizes based on the sector size is defined.
+   - `3d_limited_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml`
+   - The inter-die connection is only from output pins, with all OPINs of BRAMs and DSPs connected to the channels on the same die and the other die. 
+   - Only 60% of the OPINs of CLBs are connected to the channels on the other die and all of them can get connected to the channels on the same die.
+
+2. **stratixiv_3d:**
+   - Contains architecture files based on a [StratixIV-like](../titan/stratixiv_arch.timing.xml) architecture.
+   - Delays of switches and routing resources are similar to those reported in the capture of the StratixIV architecture.
+   - For the inter-die connection, we multiply the L4 wire delay of SIV by the ratio of the inter-die connection delay to the L4 wire delay of the Koios_3d benchmark.
+   - **Architectures:**
+     - `3d_10x10_noc_base_stratixiv_up.xml`
+       - A 10x10 NoC mech is put on the base die.
+       - The upper die is SIV-like FPGA fabric.
+     - `3d_full_inter_die_stratixiv_arch.timing.xml`
+       - The architecture has two dice.
+       - Both dice are SIV-like FPGA fabric.
+       - All pins can cross die.
+     - `3d_full_OPIN_inter_die_stratixiv_arch.timing.xml`
+       - The architecture has two dice.
+       - Both dice are SIV-like FPGA fabric.
+       - Only OPINs can cross die.
+
+3. **simple_arch:**
+   - Simple architectures primarily used for quick testing in the flow.
+   - The inter-die delay of architectures in this file is considered to be zero.
+   - Contains two dice and both have the simple fabric.
+   - All pins can cross die.

vtr_flow/arch/multi_die/aman_3d_coffe.xml → vtr_flow/arch/multi_die/koios_3d/3d_full_OPIN_inter_die_k6FracN10LB_mem20k_complexDSP_customSB_7nm.xml

@@ -235,7 +235,7 @@
   <!-- ODIN II specific config ends -->
   <layout>
     <!-- Physical descriptions begin -->
-    <fixed_layout name="coffe_7nm" width="328" height="288">
+    <auto_layout aspect_ratio="1.0">
       <layer die="0">
         <perimeter type="io" priority="101"/>
 
@@ -272,8 +272,236 @@
         <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
 
       </layer>
-    </fixed_layout>
+    </auto_layout>
   </layout>
+  <fixed_layout name="sector_1_1" width="41" height="36">
+      <layer die="0">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+        <!-- PW -->
+        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+
+        <!-- GND -->
+        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+
+      </layer>
+      <layer die="1">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+      </layer>
+    </fixed_layout>
+    <fixed_layout name="sector_2_1" width="82" height="36">
+      <layer die="0">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+        <!-- PW -->
+        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+
+        <!-- GND -->
+        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+
+      </layer>
+      <layer die="1">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+      </layer>
+    </fixed_layout>
+    <fixed_layout name="sector_2_2" width="82" height="72">
+      <layer die="0">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+        <!-- PW -->
+        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+
+        <!-- GND -->
+        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+
+      </layer>
+      <layer die="1">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+      </layer>
+    </fixed_layout>
+    <fixed_layout name="sector_4_2" width="164" height="72">
+      <layer die="0">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+        <!-- PW -->
+        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+
+        <!-- GND -->
+        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+
+      </layer>
+      <layer die="1">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+      </layer>
+    </fixed_layout>
+    <fixed_layout name="sector_4_4" width="164" height="144">
+      <layer die="0">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+        <!-- PW -->
+        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+
+        <!-- GND -->
+        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+
+      </layer>
+      <layer die="1">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+      </layer>
+    </fixed_layout>
+    <fixed_layout name="coffe_7nm" width="205" height="180">
+      <layer die="0">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+        <!-- PW -->
+        <col type="tsv_hole" startx="8" starty="5" repeatx="13" incry="12" priority="103"/>
+
+        <!-- GND -->
+        <col type="tsv_hole" startx="14" starty="11" repeatx="13" incry="12" priority="103"/>
+
+      </layer>
+      <layer die="1">
+        <perimeter type="io" priority="101"/>
+
+        <corners type="EMPTY" priority="102"/>
+
+        <fill type="clb" priority="10"/>
+
+        <col type="memory" startx="11" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="25" starty="1" repeatx="41" priority="20"/>
+        <col type="memory" startx="37" starty="1" repeatx="41" priority="20"/>
+
+        <col type="dsp_top" startx="18" starty="1" repeatx="41" priority="20"/>
+        <col type="dsp_top" startx="31" starty="1" repeatx="41" priority="20"/>
+
+      </layer>
+    </fixed_layout>
   <device>
     <sizing R_minW_nmos="13090" R_minW_pmos="19086.83"/>
     <area grid_logic_tile_area="0"/>
@@ -282,7 +510,7 @@
       <y distr="uniform" peak="1.000000"/>
     </chan_width_distr>
     <switch_block type="custom"/>
-    <connection_block input_switch_name="ipin_cblock" input_inter_die_switch_name="die_connection"/>
+    <connection_block input_switch_name="ipin_cblock" input_inter_die_switch_name="ipin_inter_layer_cblock"/>
   </device>
   <switchlist>
     <switch type="mux" name="L4_driver" R="0.0" Cin="0.0" Cout="0.0" Tdel="9.877e-11" mux_trans_size="2.6482996805637553" buf_size="18.744014602932605"/>
@@ -292,7 +520,7 @@
     <switch type="mux" name="L16_driver" R="0.0" Cin="0.0" Cout="0.0" Tdel="2.016e-10" mux_trans_size="3.1851297470059468" buf_size="39.327334265524485"/>
     <switch type="mux" name="L16_inter_layer_driver" R="0.0" Cin="0.0" Cout="0.0" Tdel="2.746e-10" mux_trans_size="3.1851297470059468" buf_size="39.327334265524485"/>
     <switch type="mux" name="ipin_cblock" R="0.0" Cout="0.0" Cin="0.0" Tdel="5.636e-11" mux_trans_size="2.008" buf_size="9.624436045683868"/>
-    <switch type="mux" name="die_connection" R="0.0" Cout="0.0" Cin="0.0" Tdel="130e-12" mux_trans_size="1.508" buf_size="11.71"/>
+    <switch type="mux" name="ipin_inter_layer_cblock" R="0.0" Cout="0.0" Cin="0.0" Tdel="130e-12" mux_trans_size="1.508" buf_size="11.71"/>
   </switchlist>
   <segmentlist>
     <segment name="L4" freq="280" length="4" type="unidir" Rmetal="0.0" Cmetal="0.0">