Tasmota with IPv6 #172
Merged
Tasmota with IPv6 #172
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* Added enableScenes API * Added enableScenes API documentation * Added enableScenes API to example Co-authored-by: Jan Procházka <[email protected]>
These instructions are based on esp32-arduino-lib-builder's build process, including https://github.com/espressif/esp32-arduino-lib-builder/blob/master/tools/update-components.sh which explains how to clone tinyusb.
…ressif#7237) * Add I2C and SPI pin definitions to wt32-eth01 pins Added missing pins based on testing using a RTC (I2C) and SD card reader (SPI). * Remove define macros Co-authored-by: Rodrigo Garcia <[email protected]> Co-authored-by: Jan Procházka <[email protected]>
* Update header * Update IPAddress implementation to support V6 * Fix cut and paste error * Explicit not equals * Explicitly reference StreamString * Remove != test (it is causing a conflict) * IPv6 support: Add proper link-local and SLAAC in STA and WifiMulti This patch partially depends on: espressif/esp32-arduino-lib-builder#67 Without this patch we will get only Link local IPv6 (still useful for MDNS and etc). With patch we will get also global IPv6 address by SLAAC. By default IPv6 disabled, until it is properly tested. Tested on BasicHttpClient by adding: wifiMulti.IPv6(true); before: wifiMulti.addAP() call Enabling Core Debug Level: verbose If IP6 obtained, in logs will be visible: [ 8028][V][WiFiGeneric.cpp:380] _arduino_event_cb(): IF[0] Got IPv6: IP Index: 0, Zone: 2, fe80:0000:0000:0000:xxxx:xxxx:xxxx:xxxx [ 8028][D][WiFiGeneric.cpp:852] _eventCallback(): Arduino Event: 8 - STA_GOT_IP6 [ 11028][V][WiFiGeneric.cpp:380] _arduino_event_cb(): IF[0] Got IPv6: IP Index: 1, Zone: 0, 2a0d:yyyy:0000:4000:yyyy:yyyy:yyyy:yyyy [ 11028][D][WiFiGeneric.cpp:852] _eventCallback(): Arduino Event: 8 - STA_GOT_IP6 This is linked to: espressif#6242 Signed-off-by: Denys Fedoryshchenko <[email protected]> * Add IPv6 support to WiFiServer One of most useful features of IPv6 to have arduino accessible from internet, without any port forward and etc. Change is fairly trivial and backward compatible with old code, tested with WiFiTelnetToSerial and AsyncUDPServer. Signed-off-by: Denys Fedoryshchenko <[email protected]> * WiFiClient::remoteIP and remoteIP6 IPv6 support For RemoteIP and AF_INET6 socket i added support ip6 to ip4 mapping, so .remoteIP will return IPv4 address on dual stack socket, if available. Scenarios tested: WiFiTelnetToSerial, wifiMulti.IPv6(true), connect both from IPv4 and IPv6 WiFiTelnetToSerial, wifiMulti.IPv6(true); but set to listen on IPv4 only. WiFiTelnetToSerial, IPv6 disabled, with or without bind to specific IP4. AsyncUDPServer, without IPv6 support. Signed-off-by: Denys Fedoryshchenko <[email protected]> * Add WiFiTelnetToSerialIPv6 example To demonstrate new abilities of dual stack WiFiServer and remoteIP6 we add this example. Signed-off-by: Denys Fedoryshchenko <[email protected]> * Add IPv6 to WifiClient (client) We need to be able to connect to remote servers over IPv6 too, and thats need different approach in DNS queries and connect(). As i'm trying to keep maximum compatibility, i introduce different behaviour if IPv6 is enabled, and backward compatible (as much as possible), if IPv6 is not enabled. IN future when IPv6 functions are tested well enough, it can be simplified. This implementation tested on esp32 in following scenarios using BasicHttpClient: IPv6 true: IPv6 only website (caveat 1) - OK Website with A and AAAA is present (caveat 1) - OK IPv4 only website - OK IPv6 not enabled: IPv6 only website - wont open (expected) Website with A and AAAA is present - OK, opens over IPv4 IPv4 only website - OK caveat 1 - sometimes SLAAC is slower than DHCPv4, so we might have status WL_CONNECTED, but IPv6 global scope is not ready yet. Signed-off-by: Denys Fedoryshchenko <[email protected]> * WiFiTelnetToSerialIPv6.ino: fix obsolete remoteIP6 call to remoteIP Example contained API from previous IPv6 implementation, fixing it. Signed-off-by: Denys Fedoryshchenko <[email protected]> Signed-off-by: Denys Fedoryshchenko <[email protected]> Co-authored-by: Sly Gryphon <[email protected]> Co-authored-by: Denys Fedoryshchenko <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.