Skip to content

Add STM32F030 demo board #367

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 1 commit into from
Nov 2, 2018
Merged

Add STM32F030 demo board #367

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
63 changes: 63 additions & 0 deletions boards.txt
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -467,6 +467,35 @@ Disco.menu.upload_method.STLink.upload.tool=stlink_upload
# Other boards

###############################
# Generic F0
GenF0.name=Generic STM32F0 series

GenF0.build.core=arduino
GenF0.build.board=GenF0
GenF0.build.extra_flags=-D{build.product_line} {build.xSerial}

# DEMO_F030F4 board
# Support: Serial1 (USART1 on PA3, PA2)
GenF0.menu.pnum.DEMO_F030F4=STM32F030F4 Demo board
GenF0.menu.pnum.DEMO_F030F4.upload.maximum_data_size=4096
GenF0.menu.pnum.DEMO_F030F4.upload.maximum_size=16384
GenF0.menu.pnum.DEMO_F030F4.build.mcu=cortex-m0
GenF0.menu.pnum.DEMO_F030F4.build.board=DEMO_F030F4
GenF0.menu.pnum.DEMO_F030F4.build.series=STM32F0xx
GenF0.menu.pnum.DEMO_F030F4.build.product_line=STM32F030x6
GenF0.menu.pnum.DEMO_F030F4.build.variant=DEMO_F030F4
GenF0.menu.pnum.DEMO_F030F4.build.cmsis_lib_gcc=arm_cortexM0l_math

# Upload menu
GenF0.menu.upload_method.STLinkMethod=STLink
GenF0.menu.upload_method.STLinkMethod.upload.protocol=STLink
GenF0.menu.upload_method.STLinkMethod.upload.tool=stlink_upload

GenF0.menu.upload_method.serialMethod=Serial
GenF0.menu.upload_method.serialMethod.upload.protocol=maple_serial
GenF0.menu.upload_method.serialMethod.upload.tool=serial_upload

################################################################################
# Generic F103
GenF103.name=Generic STM32F103 series

Expand Down Expand Up @@ -705,6 +734,12 @@ Disco.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
Disco.menu.xserial.disabled=Disabled (No Serial)
Disco.menu.xserial.disabled.build.xSerial=

GenF0.menu.xserial.generic=Enabled with generic Serial
GenF0.menu.xserial.none=Enabled without generic Serial
GenF0.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
GenF0.menu.xserial.disabled=Disabled (No Serial)
GenF0.menu.xserial.disabled.build.xSerial=

GenF103.menu.xserial.generic=Enabled with generic Serial
GenF103.menu.xserial.none=Enabled without generic Serial
GenF103.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
Expand Down Expand Up @@ -833,6 +868,24 @@ Disco.menu.opt.o3lto.build.flags.optimize=-O3 -flto
Disco.menu.opt.ogstd=Debug (-g)
Disco.menu.opt.ogstd.build.flags.optimize=-g -Og

GenF0.menu.opt.osstd=Smallest (-Os default)
GenF0.menu.opt.oslto=Smallest (-Os) with LTO
GenF0.menu.opt.oslto.build.flags.optimize=-Os -flto
GenF0.menu.opt.o1std=Fast (-O1)
GenF0.menu.opt.o1std.build.flags.optimize=-O1
GenF0.menu.opt.o1lto=Fast (-O1) with LTO
GenF0.menu.opt.o1lto.build.flags.optimize=-O1 -flto
GenF0.menu.opt.o2std=Faster (-O2)
GenF0.menu.opt.o2std.build.flags.optimize=-O2
GenF0.menu.opt.o2lto=Faster (-O2) with LTO
GenF0.menu.opt.o2lto.build.flags.optimize=-O2 -flto
GenF0.menu.opt.o3std=Fastest (-O3)
GenF0.menu.opt.o3std.build.flags.optimize=-O3
GenF0.menu.opt.o3lto=Fastest (-O3) with LTO
GenF0.menu.opt.o3lto.build.flags.optimize=-O3 -flto
GenF0.menu.opt.ogstd=Debug (-g)
GenF0.menu.opt.ogstd.build.flags.optimize=-g -Og

GenF103.menu.opt.osstd=Smallest (-Os default)
GenF103.menu.opt.oslto=Smallest (-Os) with LTO
GenF103.menu.opt.oslto.build.flags.optimize=-Os -flto
Expand Down Expand Up @@ -965,6 +1018,16 @@ Disco.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float
Disco.menu.rtlib.full=Newlib Standard
Disco.menu.rtlib.full.build.flags.ldspecs=

GenF0.menu.rtlib.nano=Newlib Nano (default)
GenF0.menu.rtlib.nanofp=Newlib Nano + Float Printf
GenF0.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
GenF0.menu.rtlib.nanofs=Newlib Nano + Float Scanf
GenF0.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
GenF0.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
GenF0.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
GenF0.menu.rtlib.full=Newlib Standard
GenF0.menu.rtlib.full.build.flags.ldspecs=

GenF103.menu.rtlib.nano=Newlib Nano (default)
GenF103.menu.rtlib.nanofp=Newlib Nano + Float Printf
GenF103.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
Expand Down
171 changes: 171 additions & 0 deletions variants/DEMO_F030F4/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,171 @@
/*
*******************************************************************************
* Copyright (c) 2018, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
* Automatically generated from STM32F030F4Px.xml
*/
#include "Arduino.h"
#include "PeripheralPins.h"

/* =====
* Note: Commented lines are alternative possibilities which are not used per default.
* If you change them, you will have to know what you do
* =====
*/


//*** ADC ***
#ifdef HAL_ADC_MODULE_ENABLED
const PinMap PinMap_ADC[] = {
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - LED
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
{NC, NP, 0}
};
#endif

//*** DAC ***
//*** No DAC ***

//*** I2C ***

#ifdef HAL_I2C_MODULE_ENABLED
const PinMap PinMap_I2C_SDA[] = {
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_I2C_MODULE_ENABLED
const PinMap PinMap_I2C_SCL[] = {
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{NC, NP, 0}
};
#endif

//*** PWM ***

#ifdef HAL_TIM_MODULE_ENABLED
const PinMap PinMap_PWM[] = {
{PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
// {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
// {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
// {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4
// {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1
{NC, NP, 0}
};
#endif

//*** SERIAL ***

#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_TX[] = {
{PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_RX[] = {
{PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_RTS[] = {
{PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_CTS[] = {
{PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NP, 0}
};
#endif

//*** SPI ***

#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // LED
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{NC, NP, 0}
};
#endif


//*** CAN ***
//*** No CAN_RD ***

//*** No CAN_TD ***

//*** ETHERNET ***

//*** No Ethernet ***

//*** QUADSPI ***

//*** No QUADSPI ***
25 changes: 25 additions & 0 deletions variants/DEMO_F030F4/PinNamesVar.h
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,25 @@
/* SYS_WKUP */
#ifdef PWR_WAKEUP_PIN1
SYS_WKUP1 = PA_0,
#endif
#ifdef PWR_WAKEUP_PIN2
SYS_WKUP2 = NC,
#endif
#ifdef PWR_WAKEUP_PIN3
SYS_WKUP3 = NC,
#endif
#ifdef PWR_WAKEUP_PIN4
SYS_WKUP4 = NC,
#endif
#ifdef PWR_WAKEUP_PIN5
SYS_WKUP5 = NC,
#endif
#ifdef PWR_WAKEUP_PIN6
SYS_WKUP6 = NC,
#endif
#ifdef PWR_WAKEUP_PIN7
SYS_WKUP7 = NC,
#endif
#ifdef PWR_WAKEUP_PIN8
SYS_WKUP8 = NC,
#endif
Loading