Skip to content

Commit 1e3846f

Browse files
BennehBoyfpistm
BennehBoy
authored and
fpistm
committed
New Variant - HY-TinySTM103T (#416)
1 parent defe5cc commit 1e3846f

File tree

7 files changed

+1137
-0
lines changed

7 files changed

+1137
-0
lines changed

‎boards.txt

+9
Original file line numberDiff line numberDiff line change
@@ -577,6 +577,15 @@ GenF1.menu.pnum.MAPLEMINI_F103CB.build.board=MAPLEMINI_F103CB
577577
GenF1.menu.pnum.MAPLEMINI_F103CB.build.product_line=STM32F103xB
578578
GenF1.menu.pnum.MAPLEMINI_F103CB.build.variant=MAPLEMINI_F103CB
579579

580+
# HY-TinySTM103TB board
581+
# Support:
582+
GenF1.menu.pnum.HY_TinySTM103TB=HY-TinySTM103TB
583+
GenF1.menu.pnum.HY_TinySTM103TB.upload.maximum_size=131072
584+
GenF1.menu.pnum.HY_TinySTM103TB.upload.maximum_data_size=20480
585+
GenF1.menu.pnum.HY_TinySTM103TB.build.board=HY_TinySTM103TB
586+
GenF1.menu.pnum.HY_TinySTM103TB.build.product_line=STM32F103xB
587+
GenF1.menu.pnum.HY_TinySTM103TB.build.variant=HY_TinySTM103T
588+
580589
# Upload menu
581590
GenF1.menu.upload_method.STLinkMethod=STLink
582591
GenF1.menu.upload_method.STLinkMethod.upload.protocol=STLink

‎variants/HY_TinySTM103T/PeripheralPins.c

+229
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,229 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2018, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* Redistribution and use in source and binary forms, with or without
7+
* modification, are permitted provided that the following conditions are met:
8+
*
9+
* 1. Redistributions of source code must retain the above copyright notice,
10+
* this list of conditions and the following disclaimer.
11+
* 2. Redistributions in binary form must reproduce the above copyright notice,
12+
* this list of conditions and the following disclaimer in the documentation
13+
* and/or other materials provided with the distribution.
14+
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15+
* may be used to endorse or promote products derived from this software
16+
* without specific prior written permission.
17+
*
18+
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19+
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20+
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21+
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22+
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23+
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24+
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25+
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26+
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27+
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28+
*******************************************************************************
29+
* Automatically generated from STM32F103T(8-B)Ux.xml
30+
*/
31+
#include "Arduino.h"
32+
#include "PeripheralPins.h"
33+
34+
/* =====
35+
* Note: Commented lines are alternative possibilities which are not used per default.
36+
* If you change them, you will have to know what you do
37+
* =====
38+
*/
39+
40+
//*** ADC ***
41+
42+
#ifdef HAL_ADC_MODULE_ENABLED
43+
const PinMap PinMap_ADC[] = {
44+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
45+
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
46+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
47+
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
48+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
49+
// {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
50+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
51+
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
52+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
53+
// {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
54+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
55+
// {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
56+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
57+
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
58+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
59+
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
60+
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
61+
// {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
62+
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
63+
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
64+
{NC, NP, 0}
65+
};
66+
#endif
67+
68+
//*** No DAC ***
69+
70+
//*** I2C ***
71+
72+
#ifdef HAL_I2C_MODULE_ENABLED
73+
const PinMap PinMap_I2C_SDA[] = {
74+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
75+
{NC, NP, 0}
76+
};
77+
#endif
78+
79+
#ifdef HAL_I2C_MODULE_ENABLED
80+
const PinMap PinMap_I2C_SCL[] = {
81+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
82+
{NC, NP, 0}
83+
};
84+
#endif
85+
86+
//*** PWM ***
87+
88+
#ifdef HAL_TIM_MODULE_ENABLED
89+
const PinMap PinMap_PWM[] = {
90+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1
91+
// {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1
92+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM2_CH2
93+
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2
94+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3
95+
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3
96+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
97+
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4
98+
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
99+
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
100+
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
101+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
102+
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1
103+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM1_CH2
104+
// {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2
105+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM1_CH3
106+
// {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3
107+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM1_CH4
108+
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4
109+
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1
110+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1
111+
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N
112+
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM3_CH3
113+
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3
114+
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N
115+
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM3_CH4
116+
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4
117+
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2
118+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2
119+
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1
120+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2
121+
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1
122+
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2
123+
{NC, NP, 0}
124+
};
125+
#endif
126+
127+
//*** SERIAL ***
128+
129+
#ifdef HAL_UART_MODULE_ENABLED
130+
const PinMap PinMap_UART_TX[] = {
131+
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
132+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
133+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART1_ENABLE)},
134+
{NC, NP, 0}
135+
};
136+
#endif
137+
138+
#ifdef HAL_UART_MODULE_ENABLED
139+
const PinMap PinMap_UART_RX[] = {
140+
{PA_3, USART2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
141+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
142+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART1_ENABLE)},
143+
{NC, NP, 0}
144+
};
145+
#endif
146+
147+
#ifdef HAL_UART_MODULE_ENABLED
148+
const PinMap PinMap_UART_RTS[] = {
149+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
150+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
151+
{NC, NP, 0}
152+
};
153+
#endif
154+
155+
#ifdef HAL_UART_MODULE_ENABLED
156+
const PinMap PinMap_UART_CTS[] = {
157+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
158+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
159+
{NC, NP, 0}
160+
};
161+
#endif
162+
163+
//*** SPI ***
164+
165+
#ifdef HAL_SPI_MODULE_ENABLED
166+
const PinMap PinMap_SPI_MOSI[] = {
167+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
168+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
169+
{NC, NP, 0}
170+
};
171+
#endif
172+
173+
#ifdef HAL_SPI_MODULE_ENABLED
174+
const PinMap PinMap_SPI_MISO[] = {
175+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
176+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
177+
{NC, NP, 0}
178+
};
179+
#endif
180+
181+
#ifdef HAL_SPI_MODULE_ENABLED
182+
const PinMap PinMap_SPI_SCLK[] = {
183+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
184+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
185+
{NC, NP, 0}
186+
};
187+
#endif
188+
189+
#ifdef HAL_SPI_MODULE_ENABLED
190+
const PinMap PinMap_SPI_SSEL[] = {
191+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
192+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
193+
{NC, NP, 0}
194+
};
195+
#endif
196+
197+
//*** CAN ***
198+
199+
#ifdef HAL_CAN_MODULE_ENABLED
200+
const PinMap PinMap_CAN_RD[] = {
201+
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)},
202+
{NC, NP, 0}
203+
};
204+
#endif
205+
206+
#ifdef HAL_CAN_MODULE_ENABLED
207+
const PinMap PinMap_CAN_TD[] = {
208+
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)},
209+
{NC, NP, 0}
210+
};
211+
#endif
212+
213+
//*** No ETHERNET ***
214+
215+
//*** No QUADSPI ***
216+
217+
//*** USB ***
218+
219+
#ifdef HAL_PCD_MODULE_ENABLED
220+
const PinMap PinMap_USB[] = {
221+
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DM
222+
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DP
223+
{NC, NP, 0}
224+
};
225+
#endif
226+
227+
//*** No USB_OTG_FS ***
228+
229+
//*** No USB_OTG_HS ***

‎variants/HY_TinySTM103T/PinNamesVar.h

+30
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,30 @@
1+
/* SYS_WKUP */
2+
#ifdef PWR_WAKEUP_PIN1
3+
SYS_WKUP1 = PA_0,
4+
#endif
5+
#ifdef PWR_WAKEUP_PIN2
6+
SYS_WKUP2 = NC,
7+
#endif
8+
#ifdef PWR_WAKEUP_PIN3
9+
SYS_WKUP3 = NC,
10+
#endif
11+
#ifdef PWR_WAKEUP_PIN4
12+
SYS_WKUP4 = NC,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN5
15+
SYS_WKUP5 = NC,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN6
18+
SYS_WKUP6 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN7
21+
SYS_WKUP7 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN8
24+
SYS_WKUP8 = NC,
25+
#endif
26+
/* USB */
27+
#ifdef USBCON
28+
USB_DM = PA_11,
29+
USB_DP = PA_12,
30+
#endif

0 commit comments

Comments
 (0)