Rainmaker library extension

libraries/RainMaker/examples/RMakerCustomAirCooler/README.md

@@ -0,0 +1,34 @@
+# ESP RainMaker Custom Device
+
+This example demonstrates how to build a custom device to be used with ESP RainMaker using Mode, Range and Toggle Parameters. 
+
+## What to expect in this example?
+
+- This example sketch uses the on board Boot button and GPIOs 16, 17, 18, 19, 21, 22 to demonstrate an ESP RainMaker AirCooler device.
+- After compiling and flashing the example, add your device using the [ESP RainMaker phone apps](https://rainmaker.espressif.com/docs/quick-links.html#phone-apps) by scanning the QR code.
+- Toggling the power state from the phone app will toggle GPIO 16.
+- Pressing the Boot button will toggle the power state (GPIO 16) and the same will reflect on the phone app.
+- Toggling the swing state from the phone app will toggle GPIO 17.
+- Changing the mode from the phone app will toggle the GPIOs 18 (auto), 19 (cool) and 21 (heat)
+- Changing the Speed slider from the phone app will dimming GPIO 22
+- You can also change the Level from the phone app and see it reflect on the device as a print message.
+
+### Output
+
+```
+Received value = true for Air Cooler - Power
+Received value = false for Air Cooler - Power
+Received value = true for Air Cooler - Swing
+Received value = false for Air Cooler - Swing
+Received value = 0 for Air Cooler - Speed
+Received value = 255 for Air Cooler - Speed
+Received value = Auto for Air Cooler - Mode
+Received value = Cool for Air Cooler - Mode
+Received value = Heat for Air Cooler - Mode
+Toggle power state to false.
+Toggle power state to false.
+```
+
+### Resetting the device
+- Press and Hold the Boot button for more than 3 seconds and then release to reset Wi-Fi configuration.
+- Press and Hold the Boot button for more than 10 seconds and then release to reset to factory defaults.

libraries/RainMaker/examples/RMakerCustomAirCooler/RMakerCustomAirCooler.ino

@@ -0,0 +1,191 @@
+//This example demonstrates the ESP RainMaker with a custom Air Cooler device
+#include "RMaker.h"
+#include "WiFi.h"
+#include "WiFiProv.h"
+#include "led_strip.h"
+
+#define DEFAULT_POWER_MODE true
+#define DEFAULT_SWING false
+#define DEFAULT_SPEED 0
+#define DEFAULT_MODE "Auto"
+
+const char *service_name = "PROV_1234";
+const char *pop = "abcd1234";
+
+#if CONFIG_IDF_TARGET_ESP32C3
+//GPIO for push button
+static int gpio_reset = 9;
+//GPIO for virtual device
+static int gpio_power = 7;
+static int gpio_swing = 3;
+static int gpio_mode_auto = 4;
+static int gpio_mode_cool = 5;
+static int gpio_mode_heat = 6;
+
+#else
+//GPIO for push button
+static int gpio_reset = 0;
+//GPIO for virtual device
+static int gpio_power = 16;
+static int gpio_swing = 17;
+static int gpio_mode_auto = 18;
+static int gpio_mode_cool = 19;
+static int gpio_mode_heat = 21;
+static int gpio_speed = 22;
+#endif
+
+bool power_state = true;
+
+// The framework provides some standard device types like switch, lightbulb, fan, temperature sensor.
+// But, you can also define custom devices using the 'Device' base class object, as shown here
+static Device my_device("Air Cooler", "my.device.air-cooler", NULL);
+
+void sysProvEvent(arduino_event_t *sys_event)
+{
+    switch (sys_event->event_id) {      
+        case ARDUINO_EVENT_PROV_START:
+#if CONFIG_IDF_TARGET_ESP32S2
+        Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
+        printQR(service_name, pop, "softap");
+#else
+        Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
+        printQR(service_name, pop, "ble");
+#endif        
+        break;
+        default:;
+    }
+}
+
+void write_callback(Device *device, Param *param, const param_val_t val, void *priv_data, write_ctx_t *ctx)
+{
+    const char *device_name = device->getDeviceName();
+    const char *param_name = param->getParamName();
+
+    if(strcmp(param_name, "Power") == 0) {
+        Serial.printf("Received value = %s for %s - %s\n", val.val.b? "true" : "false", device_name, param_name);
+        power_state = val.val.b;
+        (power_state == false) ? digitalWrite(gpio_power, LOW) : digitalWrite(gpio_power, HIGH);
+        param->updateAndReport(val);
+    } else if (strcmp(param_name, "Swing") == 0) {
+        Serial.printf("\nReceived value = %s for %s - %s\n", val.val.b? "true" : "false", device_name, param_name);
+        bool swing = val.val.b;
+        (swing == false) ? digitalWrite(gpio_swing, LOW) : digitalWrite(gpio_swing, HIGH);
+        param->updateAndReport(val);
+    } else if (strcmp(param_name, "Speed") == 0) {
+        Serial.printf("\nReceived value = %d for %s - %s\n", val.val.i, device_name, param_name);
+        int speed = val.val.i;
+        analogWrite(gpio_speed, speed);
+        param->updateAndReport(val);
+    } else if (strcmp(param_name, "Mode") == 0) {
+        const char* mode = val.val.s;
+        if (strcmp(mode, "Auto") == 0) {
+            digitalWrite(gpio_mode_auto, HIGH);
+            digitalWrite(gpio_mode_heat, LOW);
+            digitalWrite(gpio_mode_cool, LOW);
+        } else if (strcmp(mode, "Heat") == 0) {
+            digitalWrite(gpio_mode_auto, LOW);
+            digitalWrite(gpio_mode_heat, HIGH);
+            digitalWrite(gpio_mode_cool, LOW);
+        } else if (strcmp(mode, "Cool") == 0) {
+            digitalWrite(gpio_mode_auto, LOW);
+            digitalWrite(gpio_mode_heat, LOW);
+            digitalWrite(gpio_mode_cool, HIGH);
+        }
+        Serial.printf("\nReceived value = %s for %s - %s\n", val.val.s, device_name, param_name);
+        param->updateAndReport(val);
+    }
+}
+
+void setup()
+{
+    Serial.begin(115200);
+    pinMode(gpio_reset, INPUT_PULLUP);
+    pinMode(gpio_power, OUTPUT);
+    digitalWrite(gpio_power, DEFAULT_POWER_MODE);
+    pinMode(gpio_swing, OUTPUT);
+    digitalWrite(gpio_swing, DEFAULT_SWING);
+    pinMode(gpio_mode_auto, OUTPUT);
+    if (strcmp(DEFAULT_MODE, "Auto") == 0) digitalWrite(gpio_mode_auto, HIGH);
+    pinMode(gpio_mode_cool, OUTPUT);
+    if (strcmp(DEFAULT_MODE, "Cool") == 0) digitalWrite(gpio_mode_auto, HIGH);
+    pinMode(gpio_mode_heat, OUTPUT);
+    if (strcmp(DEFAULT_MODE, "Heat") == 0) digitalWrite(gpio_mode_auto, HIGH);
+    pinMode(gpio_speed, OUTPUT);
+    analogWrite(gpio_speed, DEFAULT_SPEED);
+
+    Node my_node;    
+    my_node = RMaker.initNode("ESP RainMaker Node");
+
+    //Create custom air cooler device
+    my_device.addNameParam();
+    my_device.addPowerParam(DEFAULT_POWER_MODE);
+    my_device.assignPrimaryParam(my_device.getParamByName(ESP_RMAKER_DEF_POWER_NAME));
+
+    Param swing("Swing", ESP_RMAKER_PARAM_TOGGLE, value(DEFAULT_SWING), PROP_FLAG_READ | PROP_FLAG_WRITE);
+    swing.addUIType(ESP_RMAKER_UI_TOGGLE);
+    my_device.addParam(swing);
+
+    Param speed("Speed", ESP_RMAKER_PARAM_RANGE, value(DEFAULT_SPEED), PROP_FLAG_READ | PROP_FLAG_WRITE);
+    speed.addUIType(ESP_RMAKER_UI_SLIDER);
+    speed.addBounds(value(0), value(255), value(1));
+    my_device.addParam(speed);
+
+    static const char* modes[] = { "Auto", "Cool", "Heat" };
+    Param mode_param("Mode", ESP_RMAKER_PARAM_MODE, value("Auto"), PROP_FLAG_READ | PROP_FLAG_WRITE);
+    mode_param.addValidStrList(modes, 3);
+    mode_param.addUIType(ESP_RMAKER_UI_DROPDOWN);
+    my_device.addParam(mode_param);
+
+    my_device.addCb(write_callback);
+
+    //Add custom Air Cooler device to the node   
+    my_node.addDevice(my_device);
+
+    //This is optional 
+    // RMaker.enableOTA(OTA_USING_PARAMS);
+    //If you want to enable scheduling, set time zone for your region using setTimeZone(). 
+    //The list of available values are provided here https://rainmaker.espressif.com/docs/time-service.html
+    // RMaker.setTimeZone("Asia/Shanghai");
+    //Alternatively, enable the Timezone service and let the phone apps set the appropriate timezone
+    // RMaker.enableTZService();
+
+    RMaker.enableSchedule();
+
+    RMaker.start();
+
+    WiFi.onEvent(sysProvEvent);
+#if CONFIG_IDF_TARGET_ESP32S2
+    WiFiProv.beginProvision(WIFI_PROV_SCHEME_SOFTAP, WIFI_PROV_SCHEME_HANDLER_NONE, WIFI_PROV_SECURITY_1, pop, service_name);
+#else
+    WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
+#endif
+}
+
+void loop()
+{
+    if(digitalRead(gpio_reset) == LOW) { //Push button pressed
+
+        // Key debounce handling
+        delay(100);
+        int startTime = millis();
+        while(digitalRead(gpio_reset) == LOW) delay(50);
+        int press_duration = millis() - startTime;
+
+        if (press_duration > 10000) {
+          // If key pressed for more than 10secs, reset all
+          Serial.printf("Reset to factory.\n");
+          RMakerFactoryReset(2);
+        } else if (press_duration > 3000) {
+          Serial.printf("Reset Wi-Fi.\n");
+          // If key pressed for more than 3secs, but less than 10, reset Wi-Fi
+          RMakerWiFiReset(2);
+        } else {
+          // Toggle device state
+          power_state = !power_state;
+          Serial.printf("Toggle power state to %s.\n", power_state ? "true" : "false");
+          my_device.updateAndReportParam(ESP_RMAKER_DEF_POWER_NAME, power_state);
+          (power_state == false) ? digitalWrite(gpio_power, LOW) : digitalWrite(gpio_power, HIGH);
+      }
+    }
+    delay(100);
+}

libraries/RainMaker/src/RMakerParam.cpp

@@ -30,4 +30,12 @@ esp_err_t Param::updateAndReport(param_val_t val)
     }
     return err;
 }
+
+esp_err_t Param::addValidStrList(const char **string_list, uint8_t count) {
+    esp_err_t err = esp_rmaker_param_add_valid_str_list(getParamHandle(), string_list, count);
+    if (err != ESP_OK) {
+        log_e("Add valid string list error");
+    }
+    return err;
+}
 #endif

libraries/RainMaker/src/RMakerParam.h

@@ -47,5 +47,6 @@ class Param
         esp_err_t addUIType(const char *ui_type);
         esp_err_t addBounds(param_val_t min, param_val_t max, param_val_t step);
         esp_err_t updateAndReport(param_val_t val);
+        esp_err_t addValidStrList(const char** str_list);
 };
 #endif

libraries/RainMaker/src/RMakerType.cpp

@@ -21,4 +21,9 @@ param_val_t value(float fval)
 {
     return esp_rmaker_float(fval);
 }
+
+param_val_t value(const char* sval)
+{
+    return esp_rmaker_str(sval);
+}
 #endif

libraries/RainMaker/src/RMakerType.h

@@ -33,4 +33,5 @@ param_val_t value(int);
 param_val_t value(bool);
 param_val_t value(char *);
 param_val_t value(float);
+param_val_t value(const char*);
 #endif