HTTPClient Port

libraries/HTTPClient/examples/Authorization/Authorization.ino

@@ -0,0 +1,83 @@
+/**
+ * Authorization.ino
+ *
+ *  Created on: 09.12.2015
+ *
+ */
+
+#include <Arduino.h>
+
+#include <WiFi.h>
+#include <WiFiMulti.h>
+
+#include <HTTPClient.h>
+
+#define USE_SERIAL Serial
+
+WiFiMulti wifiMulti;
+
+void setup() {
+
+    USE_SERIAL.begin(115200);
+
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+
+    for(uint8_t t = 4; t > 0; t--) {
+        USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
+        USE_SERIAL.flush();
+        delay(1000);
+    }
+
+    wifiMulti.addAP("SSID", "PASSWORD");
+
+}
+
+void loop() {
+    // wait for WiFi connection
+    if((wifiMulti.run() == WL_CONNECTED)) {
+
+        HTTPClient http;
+
+        USE_SERIAL.print("[HTTP] begin...\n");
+        // configure traged server and url
+
+
+        http.begin("http://user:[email protected]/test.html");
+
+        /*
+          // or
+          http.begin("http://192.168.1.12/test.html");
+          http.setAuthorization("user", "password");
+
+          // or
+          http.begin("http://192.168.1.12/test.html");
+          http.setAuthorization("dXNlcjpwYXN3b3Jk");
+         */
+
+
+        USE_SERIAL.print("[HTTP] GET...\n");
+        // start connection and send HTTP header
+        int httpCode = http.GET();
+
+        // httpCode will be negative on error
+        if(httpCode > 0) {
+            // HTTP header has been send and Server response header has been handled
+            USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+
+            // file found at server
+            if(httpCode == HTTP_CODE_OK) {
+                String payload = http.getString();
+                USE_SERIAL.println(payload);
+            }
+        } else {
+            USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+        }
+
+        http.end();
+    }
+
+    delay(10000);
+}
+

libraries/HTTPClient/examples/BasicHttpClient/BasicHttpClient.ino

@@ -0,0 +1,101 @@
+/**
+ * BasicHTTPClient.ino
+ *
+ *  Created on: 24.05.2015
+ *
+ */
+
+#include <Arduino.h>
+
+#include <WiFi.h>
+#include <WiFiMulti.h>
+
+#include <HTTPClient.h>
+
+#define USE_SERIAL Serial
+
+WiFiMulti wifiMulti;
+
+/*
+const char* ca = \ 
+"-----BEGIN CERTIFICATE-----\n" \  
+"MIIEkjCCA3qgAwIBAgIQCgFBQgAAAVOFc2oLheynCDANBgkqhkiG9w0BAQsFADA/\n" \  
+"MSQwIgYDVQQKExtEaWdpdGFsIFNpZ25hdHVyZSBUcnVzdCBDby4xFzAVBgNVBAMT\n" \  
+"DkRTVCBSb290IENBIFgzMB4XDTE2MDMxNzE2NDA0NloXDTIxMDMxNzE2NDA0Nlow\n" \  
+"SjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUxldCdzIEVuY3J5cHQxIzAhBgNVBAMT\n" \  
+"GkxldCdzIEVuY3J5cHQgQXV0aG9yaXR5IFgzMIIBIjANBgkqhkiG9w0BAQEFAAOC\n" \  
+"AQ8AMIIBCgKCAQEAnNMM8FrlLke3cl03g7NoYzDq1zUmGSXhvb418XCSL7e4S0EF\n" \  
+"q6meNQhY7LEqxGiHC6PjdeTm86dicbp5gWAf15Gan/PQeGdxyGkOlZHP/uaZ6WA8\n" \  
+"SMx+yk13EiSdRxta67nsHjcAHJyse6cF6s5K671B5TaYucv9bTyWaN8jKkKQDIZ0\n" \  
+"Z8h/pZq4UmEUEz9l6YKHy9v6Dlb2honzhT+Xhq+w3Brvaw2VFn3EK6BlspkENnWA\n" \  
+"a6xK8xuQSXgvopZPKiAlKQTGdMDQMc2PMTiVFrqoM7hD8bEfwzB/onkxEz0tNvjj\n" \  
+"/PIzark5McWvxI0NHWQWM6r6hCm21AvA2H3DkwIDAQABo4IBfTCCAXkwEgYDVR0T\n" \  
+"AQH/BAgwBgEB/wIBADAOBgNVHQ8BAf8EBAMCAYYwfwYIKwYBBQUHAQEEczBxMDIG\n" \  
+"CCsGAQUFBzABhiZodHRwOi8vaXNyZy50cnVzdGlkLm9jc3AuaWRlbnRydXN0LmNv\n" \  
+"bTA7BggrBgEFBQcwAoYvaHR0cDovL2FwcHMuaWRlbnRydXN0LmNvbS9yb290cy9k\n" \  
+"c3Ryb290Y2F4My5wN2MwHwYDVR0jBBgwFoAUxKexpHsscfrb4UuQdf/EFWCFiRAw\n" \  
+"VAYDVR0gBE0wSzAIBgZngQwBAgEwPwYLKwYBBAGC3xMBAQEwMDAuBggrBgEFBQcC\n" \  
+"ARYiaHR0cDovL2Nwcy5yb290LXgxLmxldHNlbmNyeXB0Lm9yZzA8BgNVHR8ENTAz\n" \  
+"MDGgL6AthitodHRwOi8vY3JsLmlkZW50cnVzdC5jb20vRFNUUk9PVENBWDNDUkwu\n" \  
+"Y3JsMB0GA1UdDgQWBBSoSmpjBH3duubRObemRWXv86jsoTANBgkqhkiG9w0BAQsF\n" \  
+"AAOCAQEA3TPXEfNjWDjdGBX7CVW+dla5cEilaUcne8IkCJLxWh9KEik3JHRRHGJo\n" \  
+"uM2VcGfl96S8TihRzZvoroed6ti6WqEBmtzw3Wodatg+VyOeph4EYpr/1wXKtx8/\n" \  
+"wApIvJSwtmVi4MFU5aMqrSDE6ea73Mj2tcMyo5jMd6jmeWUHK8so/joWUoHOUgwu\n" \  
+"X4Po1QYz+3dszkDqMp4fklxBwXRsW10KXzPMTZ+sOPAveyxindmjkW8lGy+QsRlG\n" \  
+"PfZ+G6Z6h7mjem0Y+iWlkYcV4PIWL1iwBi8saCbGS5jN2p8M+X+Q7UNKEkROb3N6\n" \  
+"KOqkqm57TH2H3eDJAkSnh6/DNFu0Qg==\n" \  
+"-----END CERTIFICATE-----\n";
+*/
+
+void setup() {
+
+    USE_SERIAL.begin(115200);
+
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+
+    for(uint8_t t = 4; t > 0; t--) {
+        USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
+        USE_SERIAL.flush();
+        delay(1000);
+    }
+
+    wifiMulti.addAP("SSID", "PASSWORD");
+
+}
+
+void loop() {
+    // wait for WiFi connection
+    if((wifiMulti.run() == WL_CONNECTED)) {
+
+        HTTPClient http;
+
+        USE_SERIAL.print("[HTTP] begin...\n");
+        // configure traged server and url
+        //http.begin("https://www.howsmyssl.com/a/check", ca); //HTTPS
+        http.begin("http://example.com/index.html"); //HTTP
+
+        USE_SERIAL.print("[HTTP] GET...\n");
+        // start connection and send HTTP header
+        int httpCode = http.GET();
+
+        // httpCode will be negative on error
+        if(httpCode > 0) {
+            // HTTP header has been send and Server response header has been handled
+            USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+
+            // file found at server
+            if(httpCode == HTTP_CODE_OK) {
+                String payload = http.getString();
+                USE_SERIAL.println(payload);
+            }
+        } else {
+            USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+        }
+
+        http.end();
+    }
+
+    delay(5000);
+}

libraries/HTTPClient/examples/ReuseConnection/ReuseConnection.ino

@@ -0,0 +1,68 @@
+/**
+ * reuseConnection.ino
+ *
+ *  Created on: 22.11.2015
+ *
+ */
+
+
+#include <Arduino.h>
+
+#include <WiFi.h>
+#include <WiFiMulti.h>
+
+#include <HTTPClient.h>
+
+#define USE_SERIAL Serial
+
+WiFiMulti wifiMulti;
+
+HTTPClient http;
+
+void setup() {
+
+    USE_SERIAL.begin(115200);
+
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+
+    for(uint8_t t = 4; t > 0; t--) {
+        USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
+        USE_SERIAL.flush();
+        delay(1000);
+    }
+
+    wifiMulti.addAP("SSID", "PASSWORD");
+
+    // allow reuse (if server supports it)
+    http.setReuse(true);
+}
+
+void loop() {
+    // wait for WiFi connection
+    if((wifiMulti.run() == WL_CONNECTED)) {
+
+        http.begin("http://192.168.1.12/test.html");
+        //http.begin("192.168.1.12", 80, "/test.html");
+
+        int httpCode = http.GET();
+        if(httpCode > 0) {
+            USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+
+            // file found at server
+            if(httpCode == HTTP_CODE_OK) {
+                http.writeToStream(&USE_SERIAL);
+            }
+        } else {
+            USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+        }
+
+        http.end();
+    }
+
+    delay(1000);
+}
+
+
+

libraries/HTTPClient/examples/StreamHttpClient/StreamHttpClient.ino

@@ -0,0 +1,100 @@
+/**
+ * StreamHTTPClient.ino
+ *
+ *  Created on: 24.05.2015
+ *
+ */
+
+#include <Arduino.h>
+
+#include <WiFi.h>
+#include <WiFiMulti.h>
+
+#include <HTTPClient.h>
+
+#define USE_SERIAL Serial
+
+WiFiMulti wifiMulti;
+
+void setup() {
+
+    USE_SERIAL.begin(115200);
+
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+    USE_SERIAL.println();
+
+    for(uint8_t t = 4; t > 0; t--) {
+        USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
+        USE_SERIAL.flush();
+        delay(1000);
+    }
+
+    wifiMulti.addAP("SSID", "PASSWORD");
+
+}
+
+void loop() {
+    // wait for WiFi connection
+    if((wifiMulti.run() == WL_CONNECTED)) {
+
+        HTTPClient http;
+
+        USE_SERIAL.print("[HTTP] begin...\n");
+
+        // configure server and url
+        http.begin("http://192.168.1.12/test.html");
+        //http.begin("192.168.1.12", 80, "/test.html");
+
+        USE_SERIAL.print("[HTTP] GET...\n");
+        // start connection and send HTTP header
+        int httpCode = http.GET();
+        if(httpCode > 0) {
+            // HTTP header has been send and Server response header has been handled
+            USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+
+            // file found at server
+            if(httpCode == HTTP_CODE_OK) {
+
+                // get lenght of document (is -1 when Server sends no Content-Length header)
+                int len = http.getSize();
+
+                // create buffer for read
+                uint8_t buff[128] = { 0 };
+
+                // get tcp stream
+                WiFiClient * stream = http.getStreamPtr();
+
+                // read all data from server
+                while(http.connected() && (len > 0 || len == -1)) {
+                    // get available data size
+                    size_t size = stream->available();
+
+                    if(size) {
+                        // read up to 128 byte
+                        int c = stream->readBytes(buff, ((size > sizeof(buff)) ? sizeof(buff) : size));
+
+                        // write it to Serial
+                        USE_SERIAL.write(buff, c);
+
+                        if(len > 0) {
+                            len -= c;
+                        }
+                    }
+                    delay(1);
+                }
+
+                USE_SERIAL.println();
+                USE_SERIAL.print("[HTTP] connection closed or file end.\n");
+
+            }
+        } else {
+            USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+        }
+
+        http.end();
+    }
+
+    delay(10000);
+}
+

libraries/HTTPClient/library.properties

@@ -0,0 +1,9 @@
+name=HTTPClient
+version=1.1
+author=Markus Sattler
+maintainer=Markus Sattler
+sentence=http Client for ESP32
+paragraph=
+category=Communication
+url=https://github.com/Links2004/Arduino/tree/libraries/ESP8266HTTPClient
+architectures=esp32