Zigbee power outlet example

CMakeLists.txt

@@ -301,6 +301,7 @@ set(ARDUINO_LIBRARY_Zigbee_SRCS
   libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.cpp
   libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.cpp
   libraries/Zigbee/src/ep/ZigbeePM25Sensor.cpp
+  libraries/Zigbee/src/ep/ZigbeePowerOutlet.cpp
   )
 
 set(ARDUINO_LIBRARY_BLE_SRCS

libraries/Zigbee/examples/Zigbee_Power_Outlet/Zigbee_Power_Outlet.ino

@@ -0,0 +1,103 @@
+// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/**
+ * @brief This example demonstrates simple Zigbee power outlet.
+ *
+ * The example demonstrates how to use Zigbee library to create a end device power outlet.
+ * The power outlet is a Zigbee end device, which is controlled by a Zigbee coordinator.
+ *
+ * Proper Zigbee mode must be selected in Tools->Zigbee mode
+ * and also the correct partition scheme must be selected in Tools->Partition Scheme.
+ *
+ * Please check the README.md for instructions and more detailed description.
+ *
+ * Created by Jan Procházka (https://github.com/P-R-O-C-H-Y/)
+ */
+
+#ifndef ZIGBEE_MODE_ED
+#error "Zigbee end device mode is not selected in Tools->Zigbee mode"
+#endif
+
+#include "Zigbee.h"
+
+/* Zigbee power outlet configuration */
+#define ZIGBEE_OUTLET_ENDPOINT 10
+uint8_t led = RGB_BUILTIN;
+uint8_t button = BOOT_PIN;
+
+ZigbeePowerOutlet zbOutlet = ZigbeePowerOutlet(ZIGBEE_OUTLET_ENDPOINT);
+
+
+
+/********************* RGB LED functions **************************/
+void setLED(bool value) {
+  digitalWrite(led, value);
+}
+
+/********************* Arduino functions **************************/
+void setup() {
+  Serial.begin(115200);
+
+  // Init LED and turn it OFF (if LED_PIN == RGB_BUILTIN, the rgbLedWrite() will be used under the hood)
+  pinMode(led, OUTPUT);
+  digitalWrite(led, LOW);
+
+  // Init button for factory reset
+  pinMode(button, INPUT_PULLUP);
+
+  //Optional: set Zigbee device name and model
+  zbOutlet.setManufacturerAndModel("Espressif", "ZBPowerOutlet");
+
+  // Set callback function for power outlet change
+  zbOutlet.onPowerOutletChange(setLED);
+
+  //Add endpoint to Zigbee Core
+  Serial.println("Adding ZigbeePowerOutlet endpoint to Zigbee Core");
+  Zigbee.addEndpoint(&zbOutlet);
+
+  // When all EPs are registered, start Zigbee. By default acts as ZIGBEE_END_DEVICE
+  if (!Zigbee.begin()) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println();
+}
+
+void loop() {
+  // Checking button for factory reset
+  if (digitalRead(button) == LOW) {  // Push button pressed
+    // Key debounce handling
+    delay(100);
+    int startTime = millis();
+    while (digitalRead(button) == LOW) {
+      delay(50);
+      if ((millis() - startTime) > 3000) {
+        // If key pressed for more than 3secs, factory reset Zigbee and reboot
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
+        delay(1000);
+        Zigbee.factoryReset();
+      }
+    }
+    // Toggle state by pressing the button
+    zbOutlet.setState(!zbOutlet.getPowerOutletState());
+  }
+  delay(100);
+}

libraries/Zigbee/keywords.txt

@@ -30,6 +30,7 @@ ZigbeeRangeExtender	KEYWORD1
 ZigbeeVibrationSensor	KEYWORD1
 ZigbeeWindowCovering	KEYWORD1
 ZigbeeIlluminanceSensor	KEYWORD1
+ZigbeePowerOutlet	KEYWORD1
 
 # Other
 zigbee_role_t	KEYWORD1

libraries/Zigbee/src/Zigbee.h

@@ -16,6 +16,8 @@
 #include "ep/ZigbeeLight.h"
 //// Controllers
 #include "ep/ZigbeeThermostat.h"
+////Outlets
+#include "ep/ZigbeePowerOutlet.h"
 //// Sensors
 #include "ep/ZigbeeAnalog.h"
 #include "ep/ZigbeeCarbonDioxideSensor.h"

libraries/Zigbee/src/ep/ZigbeePowerOutlet.cpp

@@ -0,0 +1,56 @@
+#include "ZigbeePowerOutlet.h"
+#if CONFIG_ZB_ENABLED
+
+ZigbeePowerOutlet::ZigbeePowerOutlet(uint8_t endpoint) : ZigbeeEP(endpoint) {
+  _device_id = ESP_ZB_HA_MAINS_POWER_OUTLET_DEVICE_ID;
+
+  esp_zb_mains_power_outlet_cfg_t outlet_cfg = ESP_ZB_DEFAULT_ON_OFF_SWITCH_CONFIG();
+  _cluster_list = esp_zb_mains_power_outlet_clusters_create(&outlet_cfg);  // use esp_zb_zcl_cluster_list_create() instead of esp_zb_mains_power_outlet_clusters_create()
+  _ep_config = {.endpoint = endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_MAINS_POWER_OUTLET_DEVICE_ID, .app_device_version = 0};
+  log_v("Outlet endpoint created %d", _endpoint);
+}
+
+//set attribute method -> method overridden in child class
+void ZigbeePowerOutlet::zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) {
+  //check the data and call right method
+  if (message->info.cluster == ESP_ZB_ZCL_CLUSTER_ID_ON_OFF) {
+    if (message->attribute.id == ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID && message->attribute.data.type == ESP_ZB_ZCL_ATTR_TYPE_BOOL) {
+      _current_state = *(bool *)message->attribute.data.value;
+      stateChanged();
+    } else {
+      log_w("Received message ignored. Attribute ID: %d not supported for On/Off Outlet", message->attribute.id);
+    }
+  } else {
+    log_w("Received message ignored. Cluster ID: %d not supported for On/Off Outlet", message->info.cluster);
+  }
+}
+
+void ZigbeePowerOutlet::stateChanged() {
+  if (_on_state_change) {
+    _on_state_change(_current_state);
+  } else {
+    log_w("No callback function set for outlet change");
+  }
+}
+
+bool ZigbeePowerOutlet::setState(bool state) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
+  _current_state = state;
+  stateChanged();
+
+  log_v("Updating on/off outlet state to %d", state);
+  /* Update on/off outlet state */
+  esp_zb_lock_acquire(portMAX_DELAY);
+  ret = esp_zb_zcl_set_attribute_val(
+    _endpoint, ESP_ZB_ZCL_CLUSTER_ID_ON_OFF, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID, &_current_state, false
+  );
+  esp_zb_lock_release();
+
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set outlet state: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+#endif  // CONFIG_ZB_ENABLED

libraries/Zigbee/src/ep/ZigbeePowerOutlet.h

@@ -0,0 +1,41 @@
+/* Class of Zigbee On/Off Power outlet endpoint inherited from common EP class */
+
+#pragma once
+
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#if CONFIG_ZB_ENABLED
+
+#include "ZigbeeEP.h"
+#include "ha/esp_zigbee_ha_standard.h"
+
+class ZigbeePowerOutlet : public ZigbeeEP {
+public:
+  ZigbeePowerOutlet(uint8_t endpoint);
+  ~ZigbeePowerOutlet() {}
+
+  // Use to set a cb function to be called on outlet change
+  void onPowerOutletChange(void (*callback)(bool)) {
+    _on_state_change = callback;
+  }
+  // Use to restore outlet state
+  void restoreState() {
+    stateChanged();
+  }
+  // Use to control outlet state
+  bool setState(bool state);
+  // Use to get outlet state
+  bool getPowerOutletState() {
+    return _current_state;
+  }
+
+private:
+  void zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) override;
+  //callback function to be called on outlet change
+  void (*_on_state_change)(bool);
+  void stateChanged();
+
+  bool _current_state;
+};
+
+#endif  // CONFIG_ZB_ENABLED