Make HTTPClient suitabe for any Client

libraries/ESP8266HTTPClient/examples/Authorization/Authorization.ino

@@ -12,6 +12,8 @@
 
 #include <ESP8266HTTPClient.h>
 
+#include <WiFiClient.h>
+
 #define USE_SERIAL Serial
 
 ESP8266WiFiMulti WiFiMulti;
@@ -40,22 +42,24 @@ void loop() {
   // wait for WiFi connection
   if ((WiFiMulti.run() == WL_CONNECTED)) {
 
+    WiFiClient client;
+
     HTTPClient http;
 
     USE_SERIAL.print("[HTTP] begin...\n");
     // configure traged server and url
 
 
-    http.begin("http://user:[email protected]/test.html");
+    http.begin((Client&)client, "http://guest:[email protected]/HTTP/Basic/");
 
     /*
       // or
-      http.begin("http://192.168.1.12/test.html");
-      http.setAuthorization("user", "password");
+      http.begin("http://jigsaw.w3.org/HTTP/Basic/");
+      http.setAuthorization("guest", "guest");
 
       // or
-      http.begin("http://192.168.1.12/test.html");
-      http.setAuthorization("dXNlcjpwYXN3b3Jk");
+      http.begin("http://jigsaw.w3.org/HTTP/Basic/");
+      http.setAuthorization("Z3Vlc3Q6Z3Vlc3Q=");
     */
 
 
@@ -82,4 +86,3 @@ void loop() {
 
   delay(10000);
 }
-

libraries/ESP8266HTTPClient/examples/BasicHttpClient/BasicHttpClient.ino

@@ -12,6 +12,8 @@
 
 #include <ESP8266HTTPClient.h>
 
+#include <WiFiClient.h>
+
 #define USE_SERIAL Serial
 
 ESP8266WiFiMulti WiFiMulti;
@@ -40,34 +42,39 @@ void loop() {
   // wait for WiFi connection
   if ((WiFiMulti.run() == WL_CONNECTED)) {
 
+    WiFiClient client;
+
     HTTPClient http;
 
     USE_SERIAL.print("[HTTP] begin...\n");
     // configure traged server and url
     //http.begin("https://192.168.1.12/test.html", "7a 9c f4 db 40 d3 62 5a 6e 21 bc 5c cc 66 c8 3e a1 45 59 38"); //HTTPS
-    http.begin("http://192.168.1.12/test.html"); //HTTP
+    if (http.begin((Client &)client, "http://tls.mbed.org/")) {  // HTTP
+
 
-    USE_SERIAL.print("[HTTP] GET...\n");
-    // start connection and send HTTP header
-    int httpCode = http.GET();
+      USE_SERIAL.print("[HTTP] GET...\n");
+      // start connection and send HTTP header
+      int httpCode = http.GET();
 
-    // httpCode will be negative on error
-    if (httpCode > 0) {
-      // HTTP header has been send and Server response header has been handled
-      USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+      // httpCode will be negative on error
+      if (httpCode > 0) {
+        // HTTP header has been send and Server response header has been handled
+        USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
 
-      // file found at server
-      if (httpCode == HTTP_CODE_OK) {
-        String payload = http.getString();
-        USE_SERIAL.println(payload);
+        // file found at server
+        if (httpCode == HTTP_CODE_OK || httpCode == HTTP_CODE_MOVED_PERMANENTLY) {
+          String payload = http.getString();
+          USE_SERIAL.println(payload);
+        }
+      } else {
+        USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
       }
+
+      http.end();
     } else {
-      USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+      USE_SERIAL.printf("Unable to connect\n");
     }
-
-    http.end();
   }
 
   delay(10000);
 }
-

libraries/ESP8266HTTPClient/examples/DigestAuthorization/DigestAuthorization.ino

@@ -11,8 +11,8 @@
 
 #include <ESP8266HTTPClient.h>
 
-const char* ssid = "........";
-const char* ssidPassword = "........";
+const char* ssid = "SSID";
+const char* ssidPassword = "PASSWORD";
 
 const char *username = "admin";
 const char *password = "admin";
@@ -76,7 +76,7 @@ String getDigestAuth(String& authReq, const String& username, const String& pass
 }
 
 void setup() {
-  Serial.begin(9600);
+  Serial.begin(115200);
 
   WiFi.mode(WIFI_STA);
   WiFi.begin(ssid, ssidPassword);
@@ -95,10 +95,12 @@ void setup() {
 void loop() {
   HTTPClient http;
 
+  WiFiClient client;
+
   Serial.print("[HTTP] begin...\n");
 
   // configure traged server and url
-  http.begin(String(server) + String(uri));
+  http.begin((Client&) client, String(server) + String(uri));
 
 
   const char *keys[] = {"WWW-Authenticate"};

libraries/ESP8266HTTPClient/examples/ReuseConnection/ReuseConnection.ino

@@ -45,8 +45,10 @@ void loop() {
   // wait for WiFi connection
   if ((WiFiMulti.run() == WL_CONNECTED)) {
 
-    http.begin("http://192.168.1.12/test.html");
-    //http.begin("192.168.1.12", 80, "/test.html");
+    WiFiClient client;
+
+    http.begin((Client&) client, "http://192.168.1.12/test.html");
+    //http.begin((Client&) client, "192.168.1.12", 80, "/test.html");
 
     int httpCode = http.GET();
     if (httpCode > 0) {
@@ -65,6 +67,3 @@ void loop() {
 
   delay(1000);
 }
-
-
-

libraries/ESP8266HTTPClient/examples/StreamHttpClient/StreamHttpClient.ino

@@ -42,11 +42,13 @@ void loop() {
 
     HTTPClient http;
 
+    WiFiClient client;
+
     USE_SERIAL.print("[HTTP] begin...\n");
 
     // configure server and url
-    http.begin("http://192.168.1.12/test.html");
-    //http.begin("192.168.1.12", 80, "/test.html");
+    http.begin((Client&) client, "http://jigsaw.w3.org/HTTP/connection.html");
+    //http.begin("jigsaw.w3.org", 80, "/HTTP/connection.html");
 
     USE_SERIAL.print("[HTTP] GET...\n");
     // start connection and send HTTP header
@@ -65,7 +67,7 @@ void loop() {
         uint8_t buff[128] = { 0 };
 
         // get tcp stream
-        WiFiClient * stream = http.getStreamPtr();
+        WiFiClient * stream = &client;
 
         // read all data from server
         while (http.connected() && (len > 0 || len == -1)) {
@@ -99,4 +101,3 @@ void loop() {
 
   delay(10000);
 }
-

libraries/ESP8266HTTPClient/examples/StreamHttpsClient/StreamHttpsClient.ino

@@ -0,0 +1,116 @@
+/**
+   StreamHTTPClient.ino
+
+    Created on: 24.05.2015
+
+*/
+
+#include <Arduino.h>
+
+#include <ESP8266WiFi.h>
+#include <ESP8266WiFiMulti.h>
+
+#include <ESP8266HTTPClient.h>
+
+#define USE_SERIAL Serial
+
+ESP8266WiFiMulti WiFiMulti;
+
+void setup() {
+
+  USE_SERIAL.begin(115200);
+  // USE_SERIAL.setDebugOutput(true);
+
+  USE_SERIAL.println();
+  USE_SERIAL.println();
+  USE_SERIAL.println();
+
+  for (uint8_t t = 4; t > 0; t--) {
+    USE_SERIAL.printf("[SETUP] WAIT %d...\n", t);
+    USE_SERIAL.flush();
+    delay(1000);
+  }
+
+  WiFi.mode(WIFI_STA);
+  WiFiMulti.addAP("SSID", "PASSWORD");
+
+}
+
+void loop() {
+  // wait for WiFi connection
+  if ((WiFiMulti.run() == WL_CONNECTED)) {
+
+    HTTPClient http;
+
+    BearSSL::WiFiClientSecure client;
+
+    bool mfln = client.probeMaxFragmentLength("tls.mbed.org", 443, 1024);
+    USE_SERIAL.printf("\nConnecting to https://tls.mbed.org\n");
+    USE_SERIAL.printf("MFLN supported: %s\n", mfln ? "yes" : "no");
+    if (mfln) {
+      client.setBufferSizes(1024, 1024);
+    }
+
+    USE_SERIAL.print("[HTTP] begin...\n");
+
+    // configure server and url
+    const uint8_t fingerprint[20] = {0xEB, 0xD9, 0xDF, 0x37, 0xC2, 0xCC, 0x84, 0x89, 0x00, 0xA0, 0x58, 0x52, 0x24, 0x04, 0xE4, 0x37, 0x3E, 0x2B, 0xF1, 0x41};
+    client.setFingerprint(fingerprint);
+
+    //if (http.begin("jigsaw.w3.org", 443, "/HTTP/connection.html", true)) {
+    if (http.begin((Client&) client, "https://tls.mbed.org/")) {
+
+      USE_SERIAL.print("[HTTP] GET...\n");
+      // start connection and send HTTP header
+      int httpCode = http.GET();
+      if (httpCode > 0) {
+        // HTTP header has been send and Server response header has been handled
+        USE_SERIAL.printf("[HTTP] GET... code: %d\n", httpCode);
+
+        // file found at server
+        if (httpCode == HTTP_CODE_OK) {
+
+          // get lenght of document (is -1 when Server sends no Content-Length header)
+          int len = http.getSize();
+
+          // create buffer for read
+          uint8_t buff[128] = { 0 };
+
+          // get tcp stream
+          WiFiClient * stream = &client;
+
+          // read all data from server
+          while (http.connected() && (len > 0 || len == -1)) {
+            // get available data size
+            size_t size = stream->available();
+
+            if (size) {
+              // read up to 128 byte
+              int c = stream->readBytes(buff, ((size > sizeof(buff)) ? sizeof(buff) : size));
+
+              // write it to Serial
+              USE_SERIAL.write(buff, c);
+
+              if (len > 0) {
+                len -= c;
+              }
+            }
+            delay(1);
+          }
+
+          USE_SERIAL.println();
+          USE_SERIAL.print("[HTTP] connection closed or file end.\n");
+
+        }
+      } else {
+        USE_SERIAL.printf("[HTTP] GET... failed, error: %s\n", http.errorToString(httpCode).c_str());
+      }
+
+      http.end();
+    } else {
+      USE_SERIAL.printf("Unable to connect\n");
+    }
+  }
+
+  delay(10000);
+}