Update repositories.txt

[mattgaidica]

No description provided.

[github-actions]

A problem was found with your submission https://github.com/Neurotech-Hub/Hublink-BEAM

❌ ERROR: Unable to load submission URL. Is the repository public?

[github-actions]

A problem was found with your submission https://github.com/Neurotech-Hub/Hublink-Node

❌ ERROR: The repository has no tags. You need to create a release or tag that matches the version value in the library's library.properties file.

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @mattgaidica
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[github-actions]

A problem was found with your submission https://github.com/Neurotech-Hub/Hublink-Node

❌ ERROR: The repository has no tags. You need to create a release or tag that matches the version value in the library's library.properties file.

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @mattgaidica
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[github-actions]

A problem was found with your submission https://github.com/Neurotech-Hub/Hublink-Node

❌ ERROR: The repository has no tags. You need to create a release or tag that matches the version value in the library's library.properties file.

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/Neurotech-Hub/Hublink-BEAM:

Linting library in Hublink-BEAM
INFO: No header file found matching library name (Hublink_BEAM.h). Best practices are for primary header filename to    
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: library.properties name Hublink BEAM contains spaces. Although supported, best practices is to not use spaces.
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format        
         (Rule LP015)                                                                                                  
WARNING: Unable to load the library.properties url field: 404 Not Found                                        
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP042)                                                                                          
WARNING: library.properties depends field item(s) Wire not found in the Library Manager index.                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP048)                                                                                          
WARNING: No license file found.                                                                                                                 
         See:                                                                                                                                   
         https://docs.github.com/repositories/managing-your-repositorys-settings-and-features/customizing-your-repository/licensing-a-repository
         (Rule LD002)                                                                                                                           

Linter results for project: 0 ERRORS, 4 WARNINGS

-------------------

Linting sketch in Hublink-BEAM/examples/BasicLogging

Linter results for project: no errors or warnings

-------------------

Linting sketch in Hublink-BEAM/examples/BasicLoggingHublink

Linter results for project: no errors or warnings

-------------------

Linting sketch in Hublink-BEAM/examples/DeepSleep

Linter results for project: no errors or warnings

-------------------

Linting sketch in Hublink-BEAM/examples/DeepSleepMVP

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 4 WARNINGS

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @mattgaidica
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[mattgaidica]

Fixed tags @ArduinoBot

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/Neurotech-Hub/Hublink-BEAM:

Linting library in Hublink-BEAM
INFO: No header file found matching library name (Hublink_BEAM.h). Best practices are for primary header filename to    
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: library.properties name Hublink BEAM contains spaces. Although supported, best practices is to not use spaces.
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format        
         (Rule LP015)                                                                                                  
WARNING: Unable to load the library.properties url field: 404 Not Found                                        
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP042)                                                                                          
WARNING: library.properties depends field item(s) Wire not found in the Library Manager index.                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP048)                                                                                          
WARNING: No license file found.                                                                                                                 
         See:                                                                                                                                   
         https://docs.github.com/repositories/managing-your-repositorys-settings-and-features/customizing-your-repository/licensing-a-repository
         (Rule LD002)                                                                                                                           

Linter results for project: 0 ERRORS, 4 WARNINGS

-------------------

Linting sketch in Hublink-BEAM/examples/BasicLogging

Linter results for project: no errors or warnings

-------------------

Linting sketch in Hublink-BEAM/examples/BasicLoggingHublink

Linter results for project: no errors or warnings

-------------------

Linting sketch in Hublink-BEAM/examples/DeepSleep

Linter results for project: no errors or warnings

-------------------

Linting sketch in Hublink-BEAM/examples/DeepSleepMVP

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 4 WARNINGS

[github-actions]

Your submission has now been accepted! Thanks for your contribution to the Arduino Library Manager index.

The library(s) will be available for installation via Library Manager within a day's time.

You can check the logs from the Library Manager indexer for your library(s) here:
http://downloads.arduino.cc/libraries/logs/github.com/Neurotech-Hub/Hublink-Node/
http://downloads.arduino.cc/libraries/logs/github.com/Neurotech-Hub/Hublink-BEAM/