Adding 'Adafruit_SSD1306_EMULATOR'

[sam-peach]

A required library for an open-source emulator I'm about to release :)

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:

Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name Adafruit SSD1306 contains spaces. Although supported, best practices is to not use     
         spaces.                                                                                                        
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP015)                                                                                                   
ERROR: Library name Adafruit SSD1306 is in use by a library in the Library Manager index. Each library must have a      
       unique name value. If your library is already in the index, use the "--library-manager update" flag.             
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format           
       (Rule LP017)                                                                                                     
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy  
         is not needed.                                                                                                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP036)                                                                                                   

Linter results for project: 1 ERRORS, 2 WARNINGS

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/OLED_featherwing

Linter results for project: no errors or warnings

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c

Linter results for project: no errors or warnings

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_spi

Linter results for project: no errors or warnings

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c

Linter results for project: no errors or warnings

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_spi

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 1 ERRORS, 2 WARNINGS

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @sam-peach
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[per1234]

Hello @sam-peach. I see you have fixed the error reported by the bot. However, Library Manager works exclusively from Git tags, so the bot won't be able to see the fix you made until you create a new release or tag in the library repository.

If you look at the repository contents at the latest tag, you can see that the version the bot is checking still has the problem:

https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR/blob/2.5.1/library.properties#L1

name=Adafruit SSD1306

Remember to update the version field in the library's library.properties file as needed before making a release/tag.

Once you have done that, simply mention @ArduinoBot in a comment here to trigger it to run the automated checks again. After those are passing, your library will automatically be added to Library Manager.

If you have any questions or concerns, please let me know.

Regards, Per

[sam-peach]

@ArduinoBot

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/sam-peach/Adafruit_SSD1306_EMULATOR:

Linting library in Adafruit_SSD1306_EMULATOR
WARNING: library.properties name value Adafruit SSD1306 EMULATOR is longer than the recommended length of 16 characters.
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP010)                                                                                                   
WARNING: library.properties name Adafruit SSD1306 EMULATOR contains spaces. Although supported, best practices is to not
         use spaces.                                                                                                    
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP015)                                                                                                   
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy  
         is not needed.                                                                                                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP036)                                                                                                   

Linter results for project: 0 ERRORS, 3 WARNINGS

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x32_i2c

Linter results for project: no errors or warnings

-------------------

Linting sketch in Adafruit_SSD1306_EMULATOR/examples/ssd1306_128x64_i2c

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 3 WARNINGS

[github-actions]

Your submission has now been accepted! Thanks for your contribution to the Arduino Library Manager index.

The library(s) will be available for installation via Library Manager within a day's time.

You can check the logs from the Library Manager indexer for your library(s) here:
http://downloads.arduino.cc/libraries/logs/github.com/sam-peach/Adafruit_SSD1306_EMULATOR/

[sam-peach]

@per1234 thank you so much for the help! All set now :)