arduino · karlsoderby · Mar 10, 2022 · Mar 9, 2022 · Mar 9, 2022
diff --git a/...d/iot-cloud/tutorials/01.iot-cloud-getting-started/iot-cloud-getting-started.md b/...d/iot-cloud/tutorials/01.iot-cloud-getting-started/iot-cloud-getting-started.md
@@ -43,7 +43,7 @@ Below is a list of Arduino IoT Cloud features.
 
 ## Compatible Hardware
 
-To use the Arduino IoT Cloud, we need a **cloud compatible board**. You can choose between using an official Arduino board, or a board based on the ESP32 / ESP8266 microcontroller. The Arduino IoT Cloud currently supports connection via Wi-Fi, LoRaWAN (via The Things Network) and mobile networks.
+To use the Arduino IoT Cloud, a **cloud compatible board** is required. You can choose between using an official Arduino board, or a board based on the ESP32 / ESP8266 microcontroller. The Arduino IoT Cloud currently supports connection via Wi-Fi, LoRaWAN® (via The Things Network) and mobile networks.
 
 ***All cloud-compatible Arduino boards come with a hardware secure element (such as the [ECC508](/resources/datasheets/ATECC508A-datasheet.pdf) cryptochip), where you can store your security keys.***
 
@@ -56,6 +56,9 @@ The following boards connect to the Arduino IoT Cloud via Wi-Fi.
 - [Nano RP2040 Connect](https://store.arduino.cc/nano-rp2040-connect)
 - [Nano 33 IoT](https://store.arduino.cc/arduino-nano-33-iot)
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
+- [Portenta H7 Lite Connected](https://store.arduino.cc/products/portenta-h7-lite-connected)
+- [Nicla Vision](https://store.arduino.cc/products/nicla-vision)
+
 
 Connection via Wi-Fi is an easy alternative, and your credentials can safely be entered during the configuration of a project. This type of connection is most suitable for low-range projects, where you connect your board to the cloud via your home/work/school router.
 
@@ -66,7 +69,7 @@ The following boards connect to the Arduino IoT Cloud via [The Things Stack](htt
 - [MKR WAN 1300](https://store.arduino.cc/arduino-mkr-wan-1300-lora-connectivity-1414)
 - [MKR WAN 1310](https://store.arduino.cc/mkr-wan-1310)
 
-Connection via LoRaWAN is recommended for low-power projects in both remote and urban areas, where Wi-Fi or other popular connectivity types are not available. The MKR WAN 1300/1310 boards are equipped with a LoRa radio module and has a slot for an antenna. With the right low-power configuration, the board can send data to the cloud for months on a single battery.
+Connection via LoRaWAN® is recommended for low-power projects in both remote and urban areas, where Wi-Fi or other popular connectivity types are not available. The MKR WAN 1300/1310 boards are equipped with a LoRa radio module and has a slot for an antenna. With the right low-power configuration, the board can send data to the cloud for months on a single battery.
 
 ***To learn more about setting up LoRaWAN® devices, visit the [Configuring LoRaWAN® devices in the Arduino Cloud](/cloud/iot-cloud/tutorials/cloud-lora-getting-started) guide.***
 

diff --git a/content/cloud/iot-cloud/tutorials/02.technical-reference/iot-cloud-tech-ref.md b/content/cloud/iot-cloud/tutorials/02.technical-reference/iot-cloud-tech-ref.md
@@ -9,48 +9,55 @@ author: 'Liam Aljundi'
 
 This article summarizes the use of the Arduino Cloud IoT, and includes information regarding requirements, installation, API and general usage of the platform. 
 
-## Hardware Compatibility
+## Compatible Hardware
 
-The Arduino IoT Cloud's compatible boards can be either an **official Arduino board**, or a board based on the **ESP32/ESP8266 microcontroller**.
+To use the Arduino IoT Cloud, a **cloud compatible board** is required. You can choose between using an official Arduino board, or a board based on the ESP32 / ESP8266 microcontroller. The Arduino IoT Cloud currently supports connection via Wi-Fi, LoRaWAN® (via The Things Network) and mobile networks.
 
-### Arduino Boards
+***All cloud-compatible Arduino boards come with a hardware secure element (such as the [ECC508](/resources/datasheets/ATECC508A-datasheet.pdf) cryptochip), where you can store your security keys.***
 
-All official Arduino boards that are compatible with the Arduino Cloud are listed in the image below.
+### Wi-Fi
 
-![Compatible IoT Cloud boards.](./images/iot-cloud-compatible-boards.png)
+The following boards connect to the Arduino IoT Cloud via Wi-Fi.
 
 - [MKR 1000 WiFi](https://store.arduino.cc/arduino-mkr1000-wifi)
 - [MKR WiFi 1010](https://store.arduino.cc/arduino-mkr-wifi-1010)
-- [MKR WAN 1300](https://store.arduino.cc/arduino-mkr-wan-1300-lora-connectivity-1414)
-- [MKR WAN 1310](https://store.arduino.cc/mkr-wan-1310)
-- [MKR GSM 1400](https://store.arduino.cc/arduino-mkr-gsm-1400)\*
-- [MKR NB 1500](https://store.arduino.cc/arduino-mkr-nb-1500-1413)\*
 - [Nano RP2040 Connect](https://store.arduino.cc/nano-rp2040-connect)
 - [Nano 33 IoT](https://store.arduino.cc/arduino-nano-33-iot)
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
+- [Portenta H7 Lite Connected](https://store.arduino.cc/products/portenta-h7-lite-connected)
+- [Nicla Vision](https://store.arduino.cc/products/nicla-vision)
 
-***\* Please note: The MKR GSM 1400 and MKR NB 1500 require a SIM card to connect to the cloud, as they communicate over mobile networks.***
+Connection via Wi-Fi is an easy alternative, and your credentials can safely be entered during the configuration of a project. This type of connection is most suitable for low-range projects, where you connect your board to the cloud via your home/work/school router.
 
-### Third Party Boards
+### LoRaWAN®
 
-The Arduino IoT Cloud supports a wide range of third party boards based on the ESP32 and ESP8266 microcontrollers with support for Wi-Fi. To set them up, the **third party option** can be simply chosen in the device setup.
+The following boards connect to the Arduino IoT Cloud via [The Things Stack](https://www.thethingsindustries.com/stack/), a LoRaWAN® Network Server connected to thousands of public LoRa® gateways.
 
-***The official Arduino boards are equipped with a Secure Element chip which provides an additional layer of security, protecting the communication between the board and the cloud with public-key cryptography.***
+- [MKR WAN 1300](https://store.arduino.cc/arduino-mkr-wan-1300-lora-connectivity-1414)
+- [MKR WAN 1310](https://store.arduino.cc/mkr-wan-1310)
 
-You can read more about setting up ESP32/8266 boards in the tutorial listed below:
+Connection via LoRaWAN® is recommended for low-power projects in both remote and urban areas, where Wi-Fi or other popular connectivity types are not available. The MKR WAN 1300/1310 boards are equipped with a LoRa radio module and has a slot for an antenna. With the right low-power configuration, the board can send data to the cloud for months on a single battery.
 
-- [Connecting ESP32 & ESP8266 to Arduino Cloud IoT](/cloud/iot-cloud/tutorials/esp-32-cloud)
+***To learn more about setting up LoRaWAN® devices, visit the [Configuring LoRaWAN® devices in the Arduino Cloud](/cloud/iot-cloud/tutorials/cloud-lora-getting-started) guide.***
 
-### LoRaWAN®
+### GSM / NB-IoT Boards
 
-You can easily set up your Arduino LoRaWAN® devices in the Arduino Cloud IoT platform, which is interfaced with the [The Things Stack](https://www.thethingsindustries.com/stack/). Currently, the following boards are supported:
+The MKR GSM 1400 and MKR NB 1500 require a **SIM card** to connect to the cloud, as they communicate over the mobile networks. 
 
-- [MKR WAN 1300](https://store.arduino.cc/arduino-mkr-wan-1300-lora-connectivity-1414)
-- [MKR WAN 1310](https://store.arduino.cc/mkr-wan-1310)
+- [MKR GSM 1400](https://store.arduino.cc/arduino-mkr-gsm-1400)
+- [MKR NB 1500](https://store.arduino.cc/arduino-mkr-nb-1500-1413)
+
+Connection through mobile networks can be considered in remote areas where there's no Wi-Fi, or in mobile projects (such as cargo tracking).  
+
+***For more information, visit the [Arduino SIM page](https://store.arduino.cc/digital/sim).***
+
+### ESP32 / ESP8266
+
+The Arduino IoT Cloud supports a wide range of third party boards based on the ESP32 and ESP8266 microcontrollers with support for Wi-Fi. To set them up, simply choose the **third party option** in the device setup.
 
-A complete guide to setting up your LoRaWAN® devices is found in the link below:
+![Configuring third party boards.](assets/3rd-party-support.png)
 
-- [Configuring LoRaWAN® devices in the Arduino Cloud](https://docs.arduino.cc/cloud/iot-cloud/tutorials/cloud-lora-getting-started)
+***To learn more about ESP32/ESP8266 support and how to set it up, visit the [Connecting ESP32 & ESP8266 to Arduino Cloud IoT](/cloud/iot-cloud/tutorials/esp-32-cloud) guide.***
 
 ## Software Requirements
 

diff --git a/content/cloud/iot-cloud/tutorials/06.device-to-device/device-to-device.md b/content/cloud/iot-cloud/tutorials/06.device-to-device/device-to-device.md
@@ -31,7 +31,7 @@ The goals of this project are:
 - 2x [Arduino Nano RP2040 Connect](https://store.arduino.cc/nano-rp2040-connect-with-headers).
 - Micro USB cable.
 
->**Note:** It is not required to have two devices of the same type. You can for example use a Nano RP2040 Connect and a MKR WiFi 1010. Any IoT Cloud enabled Wi-Fi board will work with this tutorial.
+***Note: It is not required to have two devices of the same type. You can for example use a Nano RP2040 Connect and a MKR WiFi 1010. Any [IoT Cloud enabled Wi-Fi board](/cloud/iot-cloud/tutorials/iot-cloud-getting-started#compatible-hardware) will work with this tutorial.***
 
 We will also need the following components for the circuit:
 
@@ -45,7 +45,7 @@ We will also need the following components for the circuit:
 
 Follow the circuit below to connect the buttons and LEDs to your Arduino board.
 
->**Note:** Remember that the pinouts are different on a Nano board. The circuit below is for a MKR WiFi 1000/1010 board.
+***Note that the pinouts are different on a Nano board. The circuit below is for a MKR WiFi 1000/1010 board.***
 
 ![Two identical circuits with 1x button and 1x LED each.](assets/device-to-device-img-01.png)
 

diff --git a/content/cloud/iot-cloud/tutorials/10.webhooks/iot-cloud-webhooks.md b/content/cloud/iot-cloud/tutorials/10.webhooks/iot-cloud-webhooks.md
@@ -37,7 +37,7 @@ You will also need a cloud compatible board:
 - [Nano 33 IoT](https://store.arduino.cc/arduino-nano-33-iot)
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 
-***\* Please note: The MKR GSM 1400 and MKR NB 1500 require a SIM card to connect to the cloud, as they communicate over mobile networks.***
+***Please note: The MKR GSM 1400 and MKR NB 1500 require a SIM card to connect to the cloud, as they communicate over mobile networks.***
 
 ## Webhook Setup