Carrier platform USB-C® to USB-A cable requirement update incl. SW Requirement

TaddyHC · TaddyHC · commit b703698f4e57 · 2024-09-24T17:51:57.000-06:00
diff --git a/content/hardware/04.pro/carriers/portenta-breakout/tutorials/breakout-jlink-setup/breakout-jlink-setup.md b/content/hardware/04.pro/carriers/portenta-breakout/tutorials/breakout-jlink-setup/breakout-jlink-setup.md
@@ -19,7 +19,8 @@ This tutorial will show you how to debug an Arduino sketch using the Portenta H7
 
 - [Portenta H7 board](https://store.arduino.cc/portenta-h7)
 - [Portenta Breakout board](https://store.arduino.cc/portenta-breakout)
-- Arduino IDE 1.8.10+ or Arduino Pro IDE 0.0.4+
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 - J-link adapter
 - Segger J-link device
 - Segger Ozone
diff --git a/content/hardware/04.pro/carriers/portenta-breakout/tutorials/getting-started/content.md b/content/hardware/04.pro/carriers/portenta-breakout/tutorials/getting-started/content.md
@@ -21,12 +21,12 @@ The Arduino Portenta Breakout is a versatile tool designed for developing, testi
 
 - [Arduino Portenta H7](https://store.arduino.cc/portenta-h7)
 - [Arduino Portenta Breakout](https://store.arduino.cc/portenta-breakout)
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Breadboard & Cables
 - Pin headers for the Portenta Breakout
 - LED & Resistor
 - Potentiometer
-- Arduino IDE 1.8.10+
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 
 ## Instructions
 
diff --git a/content/hardware/04.pro/carriers/portenta-hat-carrier/tutorials/user-manual/content.md b/content/hardware/04.pro/carriers/portenta-hat-carrier/tutorials/user-manual/content.md
@@ -43,7 +43,7 @@ To use the [Portenta Hat Carrier](https://store.arduino.cc/products/portenta-hat
 
 Additionally, the following accessories are needed:
 
-- USB-C® cable (USB-C® to USB-A cable) (x1)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 - Wi-Fi® Access Point or Ethernet with Internet access (x1)
 
 ### Software Requirements
diff --git a/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/catm1-and-nbiot/content.md b/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/catm1-and-nbiot/content.md
@@ -38,6 +38,7 @@ The goals of this project are:
 - Antenna with GSM 850 / 900 / 1800 / 1900 MHz range and the ability to connect via SMA
 - DC 4.5-20V power supply with barrel jack.
 - [Portenta Max carrier](https://store.arduino.cc/products/portenta-max-carrier)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 
 ## Instructions
 
diff --git a/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/connecting-to-ttn/content.md b/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/connecting-to-ttn/content.md
@@ -28,13 +28,13 @@ This tutorial explains how to connect your [Arduino® Max Carrier](http://store.
 
 ### Required Hardware and Software
 
-- [Portenta H7](https://store.arduino.cc/products/portenta-h7).
-- [Portenta Max Carrier](http://store.arduino.cc/portenta-max-carrier).
-- 868-915 MHz antenna with SMA connector.
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®).
-- Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software)).
-- [Arduino MKRWAN library](https://github.com/arduino-libraries/MKRWAN).  
-- An active account in [TTN](https://www.thethingsnetwork.org/).
+- [Portenta H7](https://store.arduino.cc/products/portenta-h7)
+- [Portenta Max Carrier](http://store.arduino.cc/portenta-max-carrier)
+- 868-915 MHz antenna with SMA connector
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2.0+](https://www.arduino.cc/en/software), or [Arduino Cloud Editor](https://create.arduino.cc/editor)
+- [Arduino MKRWAN library](https://github.com/arduino-libraries/MKRWAN)
+- An active account in [TTN](https://www.thethingsnetwork.org/)
 
 ## The Arduino® Portenta Max Carrier LoRaWAN® Module
 
diff --git a/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/mpcie-4g-modem/content.md b/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/mpcie-4g-modem/content.md
@@ -39,7 +39,7 @@ The hands-on part of this tutorial will walk you through performing a speed test
 
 The following accessories are needed:
 
-- USB-C® cable (USB-A to USB-C®) (x1)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 - Wi-Fi® Access Point or Ethernet with Internet access (x1)
 - External antenna: Main antenna, GNSS antenna, and Rx-Diversity antenna
 - Power cables: Wires with a cross-sectional area ranging from 0.82 mm² to 1.3 mm², corresponding to AWG sizes 18 to 16
diff --git a/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/user-manual/content.md b/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/user-manual/content.md
@@ -41,7 +41,7 @@ This user manual offers a detailed guide on the Portenta Max Carrier, consolidat
 * [Portenta X8](https://store.arduino.cc/products/portenta-x8) (x1)
 * [Portenta C33](https://store.arduino.cc/products/portenta-c33) (x1)
 * [Portenta H7](https://store.arduino.cc/products/portenta-h7) (x1)
-* USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®) (x1)
+* [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 * Wi-Fi® Access Point or Ethernet with Internet access (x1)
 * Compatible antennas like the [Arduino Pro 4G Module Antennas Kit](https://store.arduino.cc/products/4g-module-antenna) (x1)
 
diff --git a/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/x8-getting-started/content.md b/content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/x8-getting-started/content.md
@@ -30,6 +30,7 @@ The goals of this project are:
 
 - [Arduino® Portenta X8](https://store.arduino.cc/products/portenta-x8)
 - [Arduino® Portenta Max Carrier](https://store.arduino.cc/products/portenta-max-carrier)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 
 ## The Portenta Max Carrier
 
diff --git a/content/hardware/04.pro/carriers/portenta-mid-carrier/tutorials/user-manual/content.md b/content/hardware/04.pro/carriers/portenta-mid-carrier/tutorials/user-manual/content.md
@@ -44,7 +44,7 @@ The **Portenta Mid Carrier** requires one of the SOM boards from the Portenta Fa
 
 The following accessories are needed:
 
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®) (x1)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 - Wi-Fi® Access Point or Ethernet with Internet access (x1)
 - Compatible antennas like the [Arduino Pro 4G Module Antennas Kit](https://store.arduino.cc/products/4g-module-antenna) (x1)
 - Power cables: Wires with a cross-sectional area ranging from 0.82 mm² to 1.3 mm², corresponding to AWG sizes 18 to 16
