Initial commit - Portenta X8 USB-C® to USB-A cable Requirement Update

TaddyHC · TaddyHC · commit 866766dd7a3d · 2024-09-24T17:38:47.000-06:00
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/03.uploading-sketches-m4/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/03.uploading-sketches-m4/content.md
@@ -26,7 +26,7 @@ In this tutorial, we will go through the process of uploading sketches to the M4
 ### Required Hardware and Software
 
 - [Portenta X8](https://store.arduino.cc/products/portenta-x8)
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2](https://www.arduino.cc/en/software), or [Arduino CLI](https://github.com/arduino/arduino-cli)
 - Latest "Arduino Mbed OS Portenta Boards" Core
 
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/04.python-arduino-data-exchange/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/04.python-arduino-data-exchange/content.md
@@ -30,6 +30,7 @@ You will be guided on how to achieve this setup. It is recommendable to familiar
 - [Portenta X8](https://store.arduino.cc/products/portenta-x8)
 - [Portenta breakout](https://docs.arduino.cc/hardware/portenta-breakout)
 - Any sensor (in this example, we will use an [BME680](https://www.bosch-sensortec.com/products/environmental-sensors/gas-sensors/bme680/) I<sup>2</sup>C module)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2](https://www.arduino.cc/en/software), or [Arduino Cloud Editor](https://create.arduino.cc/editor)
 
 ## Python® on the X8
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/05.docker-container/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/05.docker-container/content.md
@@ -32,7 +32,7 @@ In this tutorial, we will go through the steps of how to install, run, and remov
 ### Hardware and Software Requirements
 
 - [Portenta X8](https://store.arduino.cc/products/portenta-x8)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Wi-Fi® Access Point with Internet Access
 - ADB: [Check how to connect to your Portenta X8](https://docs.arduino.cc/tutorials/portenta-x8/user-manual#out-of-the-box-experience)
 - [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2](https://www.arduino.cc/en/software), or [Arduino Cloud Editor](https://create.arduino.cc/editor)
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/06.waves-fleet-managment/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/06.waves-fleet-managment/content.md
@@ -26,7 +26,7 @@ This tutorial will show you how to define fleets and how to construct a Wave tha
 ### Required Hardware and Software
 
 - [Arduino Portenta X8](https://store.arduino.cc/products/portenta-x8)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Arduino Create account
 - Arduino Cloud for business subscription with Portenta X8 Manager add-on: [Learn more about here](https://cloud.arduino.cc/plans#business)
 - Foundries.io™ account (linked with the Arduino Cloud for business subscription)
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/07.custom-container/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/07.custom-container/content.md
@@ -23,7 +23,7 @@ In this tutorial, we will create a Docker container for the Arduino Portenta X8.
 
 - [Portenta X8](https://store.arduino.cc/portenta-x8)
 - ADB: [Check how to connect to your Portenta X8](https://docs.arduino.cc/tutorials/portenta-x8/user-manual#out-of-the-box-experience)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - [Arduino Cloud Subscription](https://cloud.arduino.cc/)
 - [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2](https://www.arduino.cc/en/software), or [Arduino Cloud Editor](https://create.arduino.cc/editor)
 
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/08.image-building/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/08.image-building/content.md
@@ -31,6 +31,7 @@ This tutorial targets customers that are not FoundriesFactory subscribers, but s
 ### Required Hardware and Software
 
 - [Portenta X8](https://store.arduino.cc/products/portenta-x8)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - [Docker Engine](https://docs.docker.com/engine/install/)
 - ~60GB of available storage space on your machine
 
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/09.image-flashing/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/09.image-flashing/content.md
@@ -25,7 +25,7 @@ In this tutorial, you will learn how to manually flash your Portenta X8 with the
 ### Required Hardware and Software
 
 - [Arduino Portenta X8](https://store.arduino.cc/products/portenta-x8)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Portenta Family Carrier (Optional):
 - [Arduino Portenta Breakout Board](https://store.arduino.cc/products/arduino-portenta-breakout)
 - [Arduino Portenta Max Carrier](https://store.arduino.cc/products/portenta-max-carrier)
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/10.datalogging-iot/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/10.datalogging-iot/content.md
@@ -41,7 +41,7 @@ These four blocks will be running locally on the [Arduino® Portenta X8](https:/
 
 - [Arduino® Portenta X8](https://store.arduino.cc/products/portenta-x8)
 - [Arduino® MKR WiFi 1010](https://store.arduino.cc/products/arduino-mkr-wifi-1010)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Wi-Fi® Access Point (AP) with Internet access
 - ADB or SSH
 - Command-line interface
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/11.display-output-webgl/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/11.display-output-webgl/content.md
@@ -31,7 +31,7 @@ In this tutorial, we will render web content from the internet using WebGL and d
 ### Required Hardware and Software
 
 - [Portenta X8](https://store.arduino.cc/products/portenta-x8)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - USB-C® hub with HDMI
 - External monitor
 - HDMI cable
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/12.multi-protocol-gateway/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/12.multi-protocol-gateway/content.md
@@ -33,7 +33,7 @@ In this tutorial, we will go through the steps on how to set up both the Linux a
 
 - [Arduino Portenta X8](https://store.arduino.cc/products/portenta-x8)
 - [Arduino Portenta Max Carrier](https://store.arduino.cc/products/portenta-max-carrier)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Wi-Fi® Access Point with Internet Access
 - 868-915 MHz antenna with SMA connector
 - ADB: [Check how to connect to your Portenta X8](https://docs.arduino.cc/tutorials/portenta-x8/user-manual#out-of-the-box-experience)
diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/13.wordpress-webserver/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/13.wordpress-webserver/content.md
@@ -29,7 +29,7 @@ You will learn to set up and access a WordPress site hosted on the X8 via a web
 ### Required Hardware and Software
 
 - [Portenta X8](https://store.arduino.cc/products/portenta-x8)
-- USB-C® cable (either USB-C® to USB-A or USB-C® to USB-C®)
+- [USB-C® cable (USB-C® to USB-A cable)](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - The [docker-compose.yml](assets/docker-compose.rar) file used in this tutorial
 
 ## Instructions
