Baudrate 74880

[Zaby1990]

Describe the request

I'm working with a ESP8266 right now. When I reset the microcontroller it sends something over the Serial Port.

This source says, that the Baud rate which the ESP8266 unses in this state is 74880.

I would like to choose this baudrate.

Describe the current behavior

The baudrate is not available in the dropdown menue in 2.0.1.

Arduino IDE version

2.0.1

Operating system

Windows

Operating system version

10

Additional context

No response

Issue checklist

• I searched for previous requests in the issue tracker
• I verified the feature was still missing when using the latest nightly build
• My request contains all necessary details

[per1234]

Hi @Zaby1990. Thanks for taking the time to submit an issue.

I see we have another report about this at arduino/serial-monitor#20.

It is best to have only a single issue per subject so we can consolidate all relevant discussion to one place, so I'll go ahead and close this in favor of the other.

If you end up with additional information to share, feel free to comment in the other thread.

[Zaby1990]

Hi, of course, it’s fine this way, thank you. Unfortunally I only searched for the missing Buadrate in the issues, so I missed the other issue. Von: per1234 ***@***.***> Gesendet: Dienstag, 8. November 2022 23:58 An: arduino/arduino-ide ***@***.***> Cc: Max-Martin Ketzel ***@***.***>; Mention ***@***.***> Betreff: Re: [arduino/arduino-ide] Baudrate 74880 (Issue #1653) Hi @Zaby1990 <https://github.com/Zaby1990> . Thanks for taking the time to submit an issue. I see we have another report about this at arduino/serial-monitor#20 <arduino/serial-monitor#20> . It is best to have only a single issue per subject so we can consolidate all relevant discussion to one place, so I'll go ahead and close this in favor of the other. If you end up with additional information to share, feel free to comment in the other thread. — Reply to this email directly, view it on GitHub <#1653 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALLMJJEV7SXDLVZTUZ6HKZ3WHLLHFANCNFSM6AAAAAAR2WMSBQ> . You are receiving this because you were mentioned. <https://github.com/notifications/beacon/ALLMJJH6M7A2WDC7Q3BPB2TWHLLHFA5CNFSM6AAAAAAR2WMSBSWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSN6W3OQ.gif> Message ID: ***@***.*** ***@***.***> >