Fwupload crash if the tools for the current OS are missing

[cmaglie]

Describe the problem

This is the panic as reported by an user of the Arduino Create Agent:

  "Msg": "panic: runtime error: invalid memory address or nil pointer dereference",
  "Msg": "[signal 0xc0000005 code=0x0 addr=0x20 pc=0x90475d]",
  "Msg": "",
  "Msg": "goroutine 1 [running]:",
  "Msg": "github.com/arduino/arduino-cli/arduino/resources.(*DownloadResource).ArchivePath(0x0, 0x125125c0)",
  "Msg": "    /home/runner/go/pkg/mod/github.com/arduino/[email protected]/arduino/resources/helpers.go:27 +0x2d",
  "Msg": "github.com/arduino/arduino-fwuploader/indexes/download.DownloadTool(0x1281a0c0)",
  "Msg": "    /home/runner/work/arduino-fwuploader/arduino-fwuploader/indexes/download/download.go:57 +0x295",
  "Msg": "github.com/arduino/arduino-fwuploader/cli/common.downloadTool(0x126e3450, {0x1265e1e0, 0x16})",
  "Msg": "    /home/runner/work/arduino-fwuploader/arduino-fwuploader/cli/common/common.go:129 +0xd1",
  "Msg": "github.com/arduino/arduino-fwuploader/cli/common.DownloadRequiredToolsForBoard(0x126e3450, 0x127d6870)",
  "Msg": "    /home/runner/work/arduino-fwuploader/arduino-fwuploader/cli/common/common.go:118 +0x9f",
  "Msg": "github.com/arduino/arduino-fwuploader/cli/firmware.runFlash(0x1246fce0, {0x125468c0, 0x0, 0x7})",
  "Msg": "    /home/runner/work/arduino-fwuploader/arduino-fwuploader/cli/firmware/flash.go:81 +0xfc",
  "Msg": "github.com/spf13/cobra.(*Command).execute(0x1246fce0, {0x12546880, 0x7, 0x8})",
  "Msg": "    /home/runner/go/pkg/mod/github.com/spf13/[email protected]/command.go:860 +0x645",
  "Msg": "github.com/spf13/cobra.(*Command).ExecuteC(0x1246f8c0)",
  "Msg": "    /home/runner/go/pkg/mod/github.com/spf13/[email protected]/command.go:974 +0x403",
  "Msg": "github.com/spf13/cobra.(*Command).Execute(...)",
  "Msg": "    /home/runner/go/pkg/mod/github.com/spf13/[email protected]/command.go:902",
  "Msg": "main.main()",
  "Msg": "    /home/runner/work/arduino-fwuploader/arduino-fwuploader/main.go:34 +0x47",
  "Msg": "Executing command: exit status 2",

To reproduce

Try to run the fw flash using an OS for which the required tools are unavailable.

Expected behavior

fwupload should exit clleanly with an error message like: "Tool xxxx is not available for you OS yyyy"

Arduino Firmware Uploader version

nightly

Operating system

N/A

Operating system version

N/A

Additional context

No response

Issue checklist

• I searched for previous reports in the issue tracker
• I verified the problem still occurs when using the latest version
• My report contains all necessary details