WiFiS3 WiFiServer::accept()

libraries/WiFiS3/examples/WiFiAdvancedChatServer/WiFiAdvancedChatServer.ino

@@ -0,0 +1,104 @@
+/*
+ Advanced WiFi Chat Server
+
+ A more advanced server that distributes any incoming messages
+ to all connected clients but the client the message comes from.
+ To use, telnet to your device's IP address and type.
+ You can see the client's input in the serial monitor as well.
+
+ */
+
+#include <WiFiS3.h>
+
+#include "arduino_secrets.h"
+///////please enter your sensitive data in the Secret tab/arduino_secrets.h
+char ssid[] = SECRET_SSID;        // your network SSID (name)
+char pass[] = SECRET_PASS;    // your network password (use for WPA, or use as key for WEP)
+
+int status = WL_IDLE_STATUS;
+
+// telnet defaults to port 23
+WiFiServer server(23);
+
+WiFiClient clients[8];
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  // check for the WiFi module:
+  if (WiFi.status() == WL_NO_MODULE) {
+    Serial.println("Communication with WiFi module failed!");
+    // don't continue
+    while (true);
+  }
+
+  String fv = WiFi.firmwareVersion();
+  if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
+    Serial.println("Please upgrade the firmware");
+  }
+
+  // attempt to connect to WiFi network:
+  while (status != WL_CONNECTED) {
+    Serial.print("Attempting to connect to SSID: ");
+    Serial.println(ssid);
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
+    status = WiFi.begin(ssid, pass);
+
+    // wait 10 seconds for connection:
+    delay(10000);
+  }
+
+  // start the server:
+  server.begin();
+
+  Serial.print("Chat server address:");
+  Serial.println(WiFi.localIP());
+}
+
+void loop() {
+  // check for any new client connecting, and say hello (before any incoming data)
+  WiFiClient newClient = server.accept();
+  if (newClient) {
+    for (byte i=0; i < 8; i++) {
+      if (!clients[i]) {
+        Serial.print("We have a new client #");
+        Serial.println(i);
+        newClient.print("Hello, client number: ");
+        newClient.println(i);
+        // Once we "accept", the client is no longer tracked by WiFiServer
+        // so we must store it into our list of clients
+        clients[i] = newClient;
+        break;
+      }
+    }
+  }
+
+  // check for incoming data from all clients
+  for (byte i=0; i < 8; i++) {
+    if (clients[i] && clients[i].available() > 0) {
+      // read bytes from a client
+      byte buffer[80];
+      int count = clients[i].read(buffer, 80);
+      // write the bytes to all other connected clients
+      for (byte j=0; j < 8; j++) {
+        if (j != i && clients[j].connected()) {
+          clients[j].write(buffer, count);
+        }
+      }
+    }
+  }
+
+  // stop any clients which disconnect
+  for (byte i=0; i < 8; i++) {
+    if (clients[i] && !clients[i].connected()) {
+      Serial.print("disconnect client #");
+      Serial.println(i);
+      clients[i].stop();
+    }
+  }
+
+}

libraries/WiFiS3/examples/WiFiAdvancedChatServer/arduino_secrets.h

@@ -0,0 +1,2 @@
+#define SECRET_SSID ""
+#define SECRET_PASS ""

libraries/WiFiS3/src/WiFiServer.cpp

@@ -32,6 +32,21 @@ WiFiClient WiFiServer::available() {
    return WiFiClient();
 }
 
+/* -------------------------------------------------------------------------- */
+WiFiClient WiFiServer::accept() {
+/* -------------------------------------------------------------------------- */
+   if(_sock != -1) {
+      string res = "";
+      modem.begin();
+      /* call the server accept on esp so that the accept is performed */
+      if(modem.write(string(PROMPT(_SERVERACCEPT)),res, "%s%d\r\n" , CMD_WRITE(_SERVERACCEPT), _sock)) {
+         int client_sock = atoi(res.c_str());
+         return WiFiClient(client_sock);
+      }
+   }
+   return WiFiClient();
+}
+
 /* -------------------------------------------------------------------------- */
 void WiFiServer::begin(int port) {
 /* -------------------------------------------------------------------------- */   

libraries/WiFiS3/src/WiFiServer.h

@@ -37,6 +37,7 @@ class WiFiServer : public Server {
   WiFiServer();
   WiFiServer(int p);
   WiFiClient available();
+  WiFiClient accept();
   void begin(int port);
   void begin();
   virtual size_t write(uint8_t);