Refactor EthernetSSLClient

libraries/Ethernet/examples/WebClientRepeatingSSL/WebClientRepeatingSSL.ino

@@ -0,0 +1,100 @@
+/*
+  Repeating TLS/SSL Ethernet Web client.
+
+  Remeber to update the CA certificates using WiFiFirmwareUpdater sketch
+  before using this sketch.
+
+ */
+
+#include <Ethernet.h>
+#include <EthernetSSLClient.h>
+#include <PortentaEthernet.h>
+
+// initialize the library instance:
+EthernetSSLClient client;
+
+char server[] = "www.arduino.cc";
+int port = 443;
+// IPAddress server(64,131,82,241);
+
+unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds
+const unsigned long postingInterval = 10 * 1000; // delay between updates, in milliseconds
+
+void setup()
+{
+
+    // start serial port:
+    Serial.begin(9600);
+    while (!Serial) {
+        ; // wait for serial port to connect. Needed for native USB port only
+    }
+
+    // start the Ethernet connection:
+    Serial.println("Initialize Ethernet with DHCP:");
+    if (Ethernet.begin() == 0) {
+        Serial.println("Failed to configure Ethernet using DHCP");
+        // Check for Ethernet hardware present
+        if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+            Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
+            while (true) {
+                delay(1); // do nothing, no point running without Ethernet hardware
+            }
+        }
+        if (Ethernet.linkStatus() == LinkOFF) {
+            Serial.println("Ethernet cable is not connected.");
+        }
+        // try to congifure using IP address instead of DHCP:
+        Ethernet.begin(ip, myDns);
+        Serial.print("My IP address: ");
+        Serial.println(Ethernet.localIP());
+    } else {
+        Serial.print("  DHCP assigned IP ");
+        Serial.println(Ethernet.localIP());
+    }
+    // give the Ethernet shield a second to initialize:
+    delay(1000);
+}
+
+void loop()
+{
+    // if there's incoming data from the net connection.
+    // send it out the serial port.  This is for debugging
+    // purposes only:
+    if (client.available()) {
+        char c = client.read();
+        Serial.write(c);
+    }
+
+    // if ten seconds have passed since your last connection,
+    // then connect again and send data:
+    if (millis() - lastConnectionTime > postingInterval) {
+        httpRequest();
+    }
+}
+
+// this method makes a HTTP connection to the server:
+void httpRequest()
+{
+    // close any connection before send a new request.
+    // This will free the socket on the WiFi shield
+    client.stop();
+
+    // if there's a successful connection:
+    if (client.connect(server, port)) {
+        Serial.println("connecting...");
+        // send the HTTP GET request:
+        client.println("GET /latest.txt HTTP/1.1");
+        client.print("Host: ");
+        client.println(server);
+        client.println("User-Agent: arduino-ethernet");
+        client.println("Accept: *");
+        client.println("Connection: close");
+        client.println();
+
+        // note the time that the connection was made:
+        lastConnectionTime = millis();
+    } else {
+        // if you couldn't make a connection:
+        Serial.println("connection failed");
+    }
+}

libraries/Ethernet/src/EthernetSSLClient.h

@@ -21,48 +21,16 @@
 #define ETHERNETSSLCLIENT_H
 
 #include "EthernetClient.h"
-
-#include <FATFileSystem.h>
-#include <MBRBlockDevice.h>
-#include <QSPIFBlockDevice.h>
+#include "MbedSSLClient.h"
 
 extern const char CA_CERTIFICATES[];
 
 namespace arduino {
 
-class EthernetSSLClient : public arduino::EthernetClient {
-
-public:
-  EthernetSSLClient();
-  virtual ~EthernetSSLClient() {
-    stop();
-  }
-
-  int connect(IPAddress ip, uint16_t port) {
-    return connectSSL(ip, port);
-  }
-  int connect(const char* host, uint16_t port) {
-    return connectSSL(host, port, _disableSNI);
-  }
-  void disableSNI(bool statusSNI) {
-    _disableSNI = statusSNI;
-  }
-
-private:
-  int setRootCA() {
-
-    QSPIFBlockDevice root;
-    mbed::MBRBlockDevice wifi_data(&root, 1);
-    mbed::FATFileSystem wifi("wlan");
-
-    int err = wifi.mount(&wifi_data);
-    if (err)
-      return err;
-
-    return ((TLSSocket*)sock)->set_root_ca_cert_path("/wlan/");
+class EthernetSSLClient : public arduino::MbedSSLClient {
+  NetworkInterface *getNetwork() {
+    return Ethernet.getNetwork();
   }
-
-  bool _disableSNI;
 };
 
 }