Ran black, updated to pylint 2.x

.github/workflows/build.yml

@@ -40,7 +40,7 @@ jobs:
         source actions-ci/install.sh
     - name: Pip install pylint, black, & Sphinx
       run: |
-        pip install --force-reinstall pylint==1.9.2 black==19.10b0 Sphinx sphinx-rtd-theme
+        pip install --force-reinstall pylint black==19.10b0 Sphinx sphinx-rtd-theme
     - name: Library version
       run: git describe --dirty --always --tags
     - name: PyLint

adafruit_is31fl3731.py

@@ -62,12 +62,12 @@
 _AUDIOSYNC_REGISTER = const(0x06)
 _BREATH1_REGISTER = const(0x08)
 _BREATH2_REGISTER = const(0x09)
-_SHUTDOWN_REGISTER = const(0x0a)
-_GAIN_REGISTER = const(0x0b)
-_ADC_REGISTER = const(0x0c)
+_SHUTDOWN_REGISTER = const(0x0A)
+_GAIN_REGISTER = const(0x0B)
+_ADC_REGISTER = const(0x0C)
 
-_CONFIG_BANK = const(0x0b)
-_BANK_ADDRESS = const(0xfd)
+_CONFIG_BANK = const(0x0B)
+_BANK_ADDRESS = const(0xFD)
 
 _PICTURE_MODE = const(0x00)
 _AUTOPLAY_MODE = const(0x08)
@@ -77,13 +77,15 @@
 _BLINK_OFFSET = const(0x12)
 _COLOR_OFFSET = const(0x24)
 
+
 class Matrix:
     """
     The Matrix class support the main function for driving the 16x9 matrix Display
 
     :param ~adafruit_bus_device.i2c_device i2c_device: the connected i2c bus i2c_device
     :param address: the device address; defaults to 0x74
     """
+
     width = 16
     height = 9
 
@@ -127,7 +129,6 @@ def _bank(self, bank=None):
         self._i2c_write_reg(_BANK_ADDRESS, bytearray([bank]))
         return None
 
-
     def _register(self, bank, register, value=None):
         self._bank(bank)
         if value is None:
@@ -145,7 +146,7 @@ def _init(self):
         for frame in range(8):
             self.fill(0, False, frame=frame)
             for col in range(18):
-                self._register(frame, _ENABLE_OFFSET + col, 0xff)
+                self._register(frame, _ENABLE_OFFSET + col, 0xFF)
         self.audio_sync(False)
 
     def reset(self):
@@ -184,7 +185,6 @@ def autoplay(self, delay=0, loops=0, frames=0):
         self._register(_CONFIG_BANK, _AUTOPLAY2_REGISTER, delay % 64)
         self._mode(_AUTOPLAY_MODE | self._frame)
 
-
     def fade(self, fade_in=None, fade_out=None, pause=0):
         """
         Start and stop the fade feature.  If both fade_in and fade_out are None (the
@@ -234,8 +234,7 @@ def audio_sync(self, value=None):
         """
         return self._register(_CONFIG_BANK, _AUDIOSYNC_REGISTER, value)
 
-    def audio_play(self, sample_rate, audio_gain=0,
-                   agc_enable=False, agc_fast=False):
+    def audio_play(self, sample_rate, audio_gain=0, agc_enable=False, agc_fast=False):
         """Controls the audio play feature
         """
         if sample_rate == 0:
@@ -248,8 +247,11 @@ def audio_play(self, sample_rate, audio_gain=0,
         audio_gain //= 3
         if not 0 <= audio_gain <= 7:
             raise ValueError("Audio gain out of range")
-        self._register(_CONFIG_BANK, _GAIN_REGISTER,
-                       bool(agc_enable) << 3 | bool(agc_fast) << 4 | audio_gain)
+        self._register(
+            _CONFIG_BANK,
+            _GAIN_REGISTER,
+            bool(agc_enable) << 3 | bool(agc_fast) << 4 | audio_gain,
+        )
         self._mode(_AUDIOPLAY_MODE)
 
     def blink(self, rate=None):
@@ -280,7 +282,7 @@ def fill(self, color=None, blink=None, frame=None):
         if color is not None:
             if not 0 <= color <= 255:
                 raise ValueError("Color out of range")
-            data = bytearray([color] * 25) # Extra byte at front for address.
+            data = bytearray([color] * 25)  # Extra byte at front for address.
             while not self.i2c.try_lock():
                 pass
             try:
@@ -290,7 +292,7 @@ def fill(self, color=None, blink=None, frame=None):
             finally:
                 self.i2c.unlock()
         if blink is not None:
-            data = bool(blink) * 0xff
+            data = bool(blink) * 0xFF
             for col in range(18):
                 self._register(frame, _BLINK_OFFSET + col, data)
 
@@ -300,7 +302,7 @@ def pixel_addr(x, y):
         """
         return x + y * 16
 
-    #pylint: disable-msg=too-many-arguments
+    # pylint: disable-msg=too-many-arguments
     def pixel(self, x, y, color=None, blink=None, frame=None):
         """
         Blink or brightness for x-, y-pixel
@@ -333,7 +335,8 @@ def pixel(self, x, y, color=None, blink=None, frame=None):
                 bits &= ~(1 << bit)
             self._register(frame, _BLINK_OFFSET + addr, bits)
         return None
-    #pylint: enable-msg=too-many-arguments
+
+    # pylint: enable-msg=too-many-arguments
 
     def image(self, img, blink=None, frame=None):
         """Set buffer to value of Python Imaging Library image.  The image should
@@ -343,24 +346,28 @@ def image(self, img, blink=None, frame=None):
         :param blink: True to blink
         :param frame: the frame to set the image
         """
-        if img.mode != 'L':
-            raise ValueError('Image must be in mode L.')
+        if img.mode != "L":
+            raise ValueError("Image must be in mode L.")
         imwidth, imheight = img.size
         if imwidth != self.width or imheight != self.height:
-            raise ValueError('Image must be same dimensions as display ({0}x{1}).' \
-                .format(self.width, self.height))
+            raise ValueError(
+                "Image must be same dimensions as display ({0}x{1}).".format(
+                    self.width, self.height
+                )
+            )
         # Grab all the pixels from the image, faster than getpixel.
         pixels = img.load()
 
         # Iterate through the pixels
-        for x in range(self.width):       # yes this double loop is slow,
+        for x in range(self.width):  # yes this double loop is slow,
             for y in range(self.height):  #  but these displays are small!
                 self.pixel(x, y, pixels[(x, y)], blink=blink, frame=frame)
 
 
 class CharlieWing(Matrix):
     """Supports the Charlieplexed feather wing
     """
+
     width = 15
     height = 7
 
@@ -378,19 +385,21 @@ def pixel_addr(x, y):
 
 class CharlieBonnet(Matrix):
     """Supports the Charlieplexed bonnet"""
+
     width = 16
     height = 8
 
     @staticmethod
     def pixel_addr(x, y):
         """Calulate the offset into the device array for x,y pixel"""
         if x >= 8:
-            return (x-6) * 16 - (y + 1)
-        return (x+1) * 16 + (7 - y)
+            return (x - 6) * 16 - (y + 1)
+        return (x + 1) * 16 + (7 - y)
 
 
 class ScrollPhatHD(Matrix):
     """Supports the Scroll pHAT HD by Pimoroni"""
+
     width = 17
     height = 7
 

docs/conf.py

@@ -2,47 +2,55 @@
 
 import os
 import sys
-sys.path.insert(0, os.path.abspath('..'))
+
+sys.path.insert(0, os.path.abspath(".."))
 
 # -- General configuration ------------------------------------------------
 
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = [
-    'sphinx.ext.autodoc',
-    'sphinx.ext.intersphinx',
-    'sphinx.ext.viewcode',
+    "sphinx.ext.autodoc",
+    "sphinx.ext.intersphinx",
+    "sphinx.ext.viewcode",
 ]
 
 # Uncomment the below if you use native CircuitPython modules such as
 # digitalio, micropython and busio. List the modules you use. Without it, the
 # autodoc module docs will fail to generate with a warning.
 # autodoc_mock_imports = ["micropython"]
 
-intersphinx_mapping = {'python': ('https://docs.python.org/3.4', None),'BusDevice': ('https://circuitpython.readthedocs.io/projects/busdevice/en/latest/', None),'CircuitPython': ('https://circuitpython.readthedocs.io/en/latest/', None)}
+intersphinx_mapping = {
+    "python": ("https://docs.python.org/3.4", None),
+    "BusDevice": (
+        "https://circuitpython.readthedocs.io/projects/busdevice/en/latest/",
+        None,
+    ),
+    "CircuitPython": ("https://circuitpython.readthedocs.io/en/latest/", None),
+}
 
 # Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
+templates_path = ["_templates"]
 
-source_suffix = '.rst'
+source_suffix = ".rst"
 
 # The master toctree document.
-master_doc = 'index'
+master_doc = "index"
 
 # General information about the project.
-project = u'Adafruit IS31FL3731 Library'
-copyright = u'2017 Radomir Dopieralski'
-author = u'Radomir Dopieralski'
+project = u"Adafruit IS31FL3731 Library"
+copyright = u"2017 Radomir Dopieralski"
+author = u"Radomir Dopieralski"
 
 # The version info for the project you're documenting, acts as replacement for
 # |version| and |release|, also used in various other places throughout the
 # built documents.
 #
 # The short X.Y version.
-version = u'1.0'
+version = u"1.0"
 # The full version, including alpha/beta/rc tags.
-release = u'1.0'
+release = u"1.0"
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
@@ -54,7 +62,7 @@
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
 # This patterns also effect to html_static_path and html_extra_path
-exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store', '.env', 'CODE_OF_CONDUCT.md']
+exclude_patterns = ["_build", "Thumbs.db", ".DS_Store", ".env", "CODE_OF_CONDUCT.md"]
 
 # The reST default role (used for this markup: `text`) to use for all
 # documents.
@@ -66,7 +74,7 @@
 add_function_parentheses = True
 
 # The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
+pygments_style = "sphinx"
 
 # If true, `todo` and `todoList` produce output, else they produce nothing.
 todo_include_todos = False
@@ -80,68 +88,76 @@
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 #
-on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
+on_rtd = os.environ.get("READTHEDOCS", None) == "True"
 
 if not on_rtd:  # only import and set the theme if we're building docs locally
     try:
         import sphinx_rtd_theme
-        html_theme = 'sphinx_rtd_theme'
-        html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), '.']
+
+        html_theme = "sphinx_rtd_theme"
+        html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), "."]
     except:
-        html_theme = 'default'
-        html_theme_path = ['.']
+        html_theme = "default"
+        html_theme_path = ["."]
 else:
-    html_theme_path = ['.']
+    html_theme_path = ["."]
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
+html_static_path = ["_static"]
 
 # The name of an image file (relative to this directory) to use as a favicon of
 # the docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
 # pixels large.
 #
-html_favicon = '_static/favicon.ico'
+html_favicon = "_static/favicon.ico"
 
 # Output file base name for HTML help builder.
-htmlhelp_basename = 'AdafruitIS31FL3731Librarydoc'
+htmlhelp_basename = "AdafruitIS31FL3731Librarydoc"
 
 # -- Options for LaTeX output ---------------------------------------------
 
 latex_elements = {
-     # The paper size ('letterpaper' or 'a4paper').
-     #
-     # 'papersize': 'letterpaper',
-
-     # The font size ('10pt', '11pt' or '12pt').
-     #
-     # 'pointsize': '10pt',
-
-     # Additional stuff for the LaTeX preamble.
-     #
-     # 'preamble': '',
-
-     # Latex figure (float) alignment
-     #
-     # 'figure_align': 'htbp',
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-    (master_doc, 'AdafruitIS31FL3731Library.tex', u'Adafruit IS31FL3731 Library Documentation',
-     author, 'manual'),
+    (
+        master_doc,
+        "AdafruitIS31FL3731Library.tex",
+        u"Adafruit IS31FL3731 Library Documentation",
+        author,
+        "manual",
+    ),
 ]
 
 # -- Options for manual page output ---------------------------------------
 
 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
 man_pages = [
-    (master_doc, 'adafruitIS31FL3731library', u'Adafruit IS31FL3731 Library Documentation',
-     [author], 1)
+    (
+        master_doc,
+        "adafruitIS31FL3731library",
+        u"Adafruit IS31FL3731 Library Documentation",
+        [author],
+        1,
+    )
 ]
 
 # -- Options for Texinfo output -------------------------------------------
@@ -150,7 +166,13 @@
 # (source start file, target name, title, author,
 #  dir menu entry, description, category)
 texinfo_documents = [
-    (master_doc, 'AdafruitIS31FL3731Library', u'Adafruit IS31FL3731 Library Documentation',
-     author, 'AdafruitIS31FL3731Library', 'One line description of project.',
-     'Miscellaneous'),
+    (
+        master_doc,
+        "AdafruitIS31FL3731Library",
+        u"Adafruit IS31FL3731 Library Documentation",
+        author,
+        "AdafruitIS31FL3731Library",
+        "One line description of project.",
+        "Miscellaneous",
+    ),
 ]