/usr/bin/env time -v /home/casauser/Desktop/Most-Updated-VTR/Main/vpr/vpr stratixiv_arch.timing.xml LU230_stratixiv_arch_timing --circuit_file LU230_stratixiv_arch_timing.pre-vpr.blif --route_chan_width 300 --max_router_iterations 400 --router_lookahead map --initial_pres_fac 1.0 --router_profiler_astar_fac 1.5 --sdc_file /home/casauser/Desktop/Most-Updated-VTR/Main/vtr_flow/benchmarks/titan_blif/LU230_stratixiv_arch_timing.sdc VPR FPGA Placement and Routing. Version: 8.1.0-dev+d112aa210 Revision: v8.0.0-3431-gd112aa210 Compiled: 2021-03-14T14:40:12 Compiler: GNU 7.5.0 on Linux-5.4.0-66-generic x86_64 Build Info: Release VTR_ASSERT_LEVEL=2 University of Toronto verilogtorouting.org vtr-users@googlegroups.com This is free open source code under MIT license. VPR was run with the following command-line: /home/casauser/Desktop/Most-Updated-VTR/Main/vpr/vpr stratixiv_arch.timing.xml LU230_stratixiv_arch_timing --circuit_file LU230_stratixiv_arch_timing.pre-vpr.blif --route_chan_width 300 --max_router_iterations 400 --router_lookahead map --initial_pres_fac 1.0 --router_profiler_astar_fac 1.5 --sdc_file /home/casauser/Desktop/Most-Updated-VTR/Main/vtr_flow/benchmarks/titan_blif/LU230_stratixiv_arch_timing.sdc Using up to 1 parallel worker(s) Architecture file: stratixiv_arch.timing.xml Circuit name: LU230_stratixiv_arch_timing # Loading Architecture Description # Loading Architecture Description took 0.58 seconds (max_rss 72.0 MiB, delta_rss +58.5 MiB) # Building complex block graph # Building complex block graph took 4.53 seconds (max_rss 620.2 MiB, delta_rss +548.2 MiB) # Load circuit Found constant-zero generator 'gnd' Found constant-one generator 'vcc' # Load circuit took 14.68 seconds (max_rss 2092.6 MiB, delta_rss +1472.3 MiB) # Clean circuit Absorbed 39 LUT buffers Inferred 10 additional primitive pins as constant generators since they have no combinationally connected inputs Inferred 1045 additional primitive pins as constant generators due to constant inputs Inferred 0 additional primitive pins as constant generators since they have no combinationally connected inputs Inferred 0 additional primitive pins as constant generators due to constant inputs Swept input(s) : 0 Swept output(s) : 0 (0 dangling, 0 constant) Swept net(s) : 6412 Swept block(s) : 0 Constant Pins Marked: 1055 # Clean circuit took 0.37 seconds (max_rss 2092.6 MiB, delta_rss +0.0 MiB) # Compress circuit # Compress circuit took 1.37 seconds (max_rss 2092.6 MiB, delta_rss +0.0 MiB) # Verify circuit # Verify circuit took 0.56 seconds (max_rss 2092.6 MiB, delta_rss +0.0 MiB) Circuit Statistics: Blocks: 568001 .input : 178 .output : 195 0-LUT : 2 dffeas : 293194 stratixiv_lcell_comb : 208613 stratixiv_mac_mult.input_type{comb} : 4 stratixiv_mac_mult.input_type{reg} : 920 stratixiv_mac_out.opmode{36_bit_multiply}.input_type{comb}.output_type{comb} : 1 stratixiv_mac_out.opmode{36_bit_multiply}.input_type{reg}.output_type{reg} : 230 stratixiv_ram_block.opmode{dual_port}.output_type{reg} : 384 stratixiv_ram_block.opmode{dual_port}.output_type{reg}.port_a_address_width{14}.port_b_address_width{14}: 128 stratixiv_ram_block.opmode{dual_port}.output_type{reg}.port_a_address_width{2}.port_b_address_width{2} : 27890 stratixiv_ram_block.opmode{dual_port}.output_type{reg}.port_a_address_width{3}.port_b_address_width{3} : 3258 stratixiv_ram_block.opmode{dual_port}.output_type{reg}.port_a_address_width{4}.port_b_address_width{4} : 3516 stratixiv_ram_block.opmode{dual_port}.output_type{reg}.port_a_address_width{5}.port_b_address_width{5} : 48 stratixiv_ram_block.opmode{dual_port}.output_type{reg}.port_a_address_width{8}.port_b_address_width{8} : 29440 Nets : 663067 Avg Fanout: 4.1 Max Fanout: 487716.0 Min Fanout: 1.0 Netlist Clocks: 2 # Build Timing Graph Timing Graph Nodes: 4586765 Timing Graph Edges: 11015880 Timing Graph Levels: 428 # Build Timing Graph took 6.96 seconds (max_rss 2968.7 MiB, delta_rss +876.2 MiB) Netlist contains 2 clocks Netlist Clock 'clk' Fanout: 487716 pins (14.3%), 358956 blocks (63.2%) Netlist Clock 'phy_clk' Fanout: 620 pins (0.0%), 464 blocks (0.1%) # Load Timing Constraints Warning 1: get_clocks target name or pattern 'clk' matched no clocks Warning 2: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 3: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 4: get_clocks target name or pattern 'clk' matched no clocks Warning 5: get_clocks target name or pattern 'clk' matched no clocks Warning 6: get_clocks target name or pattern 'clk' matched no clocks Warning 7: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 8: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 9: get_clocks target name or pattern 'clk' matched no clocks Warning 10: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 11: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 12: get_clocks target name or pattern 'clk' matched no clocks Warning 13: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 14: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 15: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 16: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 17: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 18: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 19: get_clocks target name or pattern 'clk' matched no clocks Warning 20: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 21: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 22: set_input_delay command matched but was not applied to primary output 'done' Warning 23: set_input_delay command matched but was not applied to primary output 'mem_addr[0]' Warning 24: set_input_delay command matched but was not applied to primary output 'mem_addr[1]' Warning 25: set_input_delay command matched but was not applied to primary output 'mem_addr[2]' Warning 26: set_input_delay command matched but was not applied to primary output 'mem_addr[3]' Warning 27: set_input_delay command matched but was not applied to primary output 'mem_addr[4]' Warning 28: set_input_delay command matched but was not applied to primary output 'mem_addr[5]' Warning 29: set_input_delay command matched but was not applied to primary output 'mem_addr[6]' Warning 30: set_input_delay command matched but was not applied to primary output 'mem_addr[7]' Warning 31: set_input_delay command matched but was not applied to primary output 'mem_addr[8]' Warning 32: set_input_delay command matched but was not applied to primary output 'mem_addr[9]' Warning 33: set_input_delay command matched but was not applied to primary output 'mem_addr[10]' Warning 34: set_input_delay command matched but was not applied to primary output 'mem_addr[11]' Warning 35: set_input_delay command matched but was not applied to primary output 'mem_addr[12]' Warning 36: set_input_delay command matched but was not applied to primary output 'mem_ba[0]' Warning 37: set_input_delay command matched but was not applied to primary output 'mem_ba[1]' Warning 38: set_input_delay command matched but was not applied to primary output 'mem_cas_n' Warning 39: set_input_delay command matched but was not applied to primary output 'mem_cke[0]' Warning 40: set_input_delay command matched but was not applied to primary output 'mem_cs_n[0]' Warning 41: set_input_delay command matched but was not applied to primary output 'mem_odt[0]' Warning 42: set_input_delay command matched but was not applied to primary output 'mem_ras_n' Warning 43: set_input_delay command matched but was not applied to primary output 'mem_we_n' Warning 44: set_input_delay command matched but was not applied to primary output 'mem_local_be[0]' Warning 45: set_input_delay command matched but was not applied to primary output 'mem_local_be[1]' Warning 46: set_input_delay command matched but was not applied to primary output 'mem_local_be[2]' Warning 47: set_input_delay command matched but was not applied to primary output 'mem_local_be[3]' Warning 48: set_input_delay command matched but was not applied to primary output 'mem_local_be[4]' Warning 49: set_input_delay command matched but was not applied to primary output 'mem_local_be[5]' Warning 50: set_input_delay command matched but was not applied to primary output 'mem_local_be[6]' Warning 51: set_input_delay command matched but was not applied to primary output 'mem_local_be[7]' Warning 52: set_input_delay command matched but was not applied to primary output 'mem_local_be[8]' Warning 53: set_input_delay command matched but was not applied to primary output 'mem_local_be[9]' Warning 54: set_input_delay command matched but was not applied to primary output 'mem_local_be[10]' Warning 55: set_input_delay command matched but was not applied to primary output 'mem_local_be[11]' Warning 56: set_input_delay command matched but was not applied to primary output 'mem_local_be[12]' Warning 57: set_input_delay command matched but was not applied to primary output 'mem_local_be[13]' Warning 58: set_input_delay command matched but was not applied to primary output 'mem_local_be[14]' Warning 59: set_input_delay command matched but was not applied to primary output 'mem_local_be[15]' Warning 60: set_input_delay command matched but was not applied to primary output 'mem_local_read_req' Warning 61: set_input_delay command matched but was not applied to primary output 'mem_local_size[0]' Warning 62: set_input_delay command matched but was not applied to primary output 'mem_local_size[1]' Warning 63: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[0]' Warning 64: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[1]' Warning 65: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[2]' Warning 66: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[3]' Warning 67: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[4]' Warning 68: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[5]' Warning 69: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[6]' Warning 70: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[7]' Warning 71: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[8]' Warning 72: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[9]' Warning 73: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[10]' Warning 74: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[11]' Warning 75: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[12]' Warning 76: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[13]' Warning 77: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[14]' Warning 78: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[15]' Warning 79: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[16]' Warning 80: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[17]' Warning 81: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[18]' Warning 82: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[19]' Warning 83: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[20]' Warning 84: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[21]' Warning 85: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[22]' Warning 86: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[23]' Warning 87: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[24]' Warning 88: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[25]' Warning 89: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[26]' Warning 90: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[27]' Warning 91: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[28]' Warning 92: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[29]' Warning 93: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[30]' Warning 94: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[31]' Warning 95: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[32]' Warning 96: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[33]' Warning 97: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[34]' Warning 98: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[35]' Warning 99: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[36]' Warning 100: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[37]' Warning 101: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[38]' Warning 102: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[39]' Warning 103: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[40]' Warning 104: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[41]' Warning 105: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[42]' Warning 106: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[43]' Warning 107: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[44]' Warning 108: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[45]' Warning 109: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[46]' Warning 110: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[47]' Warning 111: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[48]' Warning 112: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[49]' Warning 113: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[50]' Warning 114: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[51]' Warning 115: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[52]' Warning 116: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[53]' Warning 117: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[54]' Warning 118: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[55]' Warning 119: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[56]' Warning 120: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[57]' Warning 121: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[58]' Warning 122: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[59]' Warning 123: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[60]' Warning 124: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[61]' Warning 125: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[62]' Warning 126: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[63]' Warning 127: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[64]' Warning 128: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[65]' Warning 129: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[66]' Warning 130: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[67]' Warning 131: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[68]' Warning 132: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[69]' Warning 133: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[70]' Warning 134: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[71]' Warning 135: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[72]' Warning 136: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[73]' Warning 137: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[74]' Warning 138: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[75]' Warning 139: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[76]' Warning 140: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[77]' Warning 141: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[78]' Warning 142: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[79]' Warning 143: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[80]' Warning 144: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[81]' Warning 145: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[82]' Warning 146: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[83]' Warning 147: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[84]' Warning 148: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[85]' Warning 149: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[86]' Warning 150: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[87]' Warning 151: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[88]' Warning 152: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[89]' Warning 153: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[90]' Warning 154: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[91]' Warning 155: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[92]' Warning 156: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[93]' Warning 157: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[94]' Warning 158: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[95]' Warning 159: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[96]' Warning 160: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[97]' Warning 161: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[98]' Warning 162: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[99]' Warning 163: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[100]' Warning 164: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[101]' Warning 165: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[102]' Warning 166: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[103]' Warning 167: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[104]' Warning 168: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[105]' Warning 169: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[106]' Warning 170: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[107]' Warning 171: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[108]' Warning 172: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[109]' Warning 173: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[110]' Warning 174: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[111]' Warning 175: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[112]' Warning 176: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[113]' Warning 177: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[114]' Warning 178: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[115]' Warning 179: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[116]' Warning 180: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[117]' Warning 181: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[118]' Warning 182: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[119]' Warning 183: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[120]' Warning 184: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[121]' Warning 185: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[122]' Warning 186: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[123]' Warning 187: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[124]' Warning 188: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[125]' Warning 189: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[126]' Warning 190: set_input_delay command matched but was not applied to primary output 'mem_local_wdata[127]' Warning 191: set_input_delay command matched but was not applied to primary output 'mem_local_write_req' Warning 192: set_input_delay command matched but was not applied to primary output 'mem_local_wdata_req' Warning 193: set_input_delay command matched but was not applied to primary output 'mem_local_addr[0]' Warning 194: set_input_delay command matched but was not applied to primary output 'mem_local_addr[1]' Warning 195: set_input_delay command matched but was not applied to primary output 'mem_local_addr[2]' Warning 196: set_input_delay command matched but was not applied to primary output 'mem_local_addr[3]' Warning 197: set_input_delay command matched but was not applied to primary output 'mem_local_addr[4]' Warning 198: set_input_delay command matched but was not applied to primary output 'mem_local_addr[5]' Warning 199: set_input_delay command matched but was not applied to primary output 'mem_local_addr[6]' Warning 200: set_input_delay command matched but was not applied to primary output 'mem_local_addr[7]' Warning 201: set_input_delay command matched but was not applied to primary output 'mem_local_addr[8]' Warning 202: set_input_delay command matched but was not applied to primary output 'mem_local_addr[9]' Warning 203: set_input_delay command matched but was not applied to primary output 'mem_local_addr[10]' Warning 204: set_input_delay command matched but was not applied to primary output 'mem_local_addr[11]' Warning 205: set_input_delay command matched but was not applied to primary output 'mem_local_addr[12]' Warning 206: set_input_delay command matched but was not applied to primary output 'mem_local_addr[13]' Warning 207: set_input_delay command matched but was not applied to primary output 'mem_local_addr[14]' Warning 208: set_input_delay command matched but was not applied to primary output 'mem_local_addr[15]' Warning 209: set_input_delay command matched but was not applied to primary output 'mem_local_addr[16]' Warning 210: set_input_delay command matched but was not applied to primary output 'mem_local_addr[17]' Warning 211: set_input_delay command matched but was not applied to primary output 'mem_local_addr[18]' Warning 212: set_input_delay command matched but was not applied to primary output 'mem_local_addr[19]' Warning 213: set_input_delay command matched but was not applied to primary output 'mem_local_addr[20]' Warning 214: set_input_delay command matched but was not applied to primary output 'mem_local_addr[21]' Warning 215: set_input_delay command matched but was not applied to primary output 'mem_local_addr[22]' Warning 216: set_input_delay command matched but was not applied to primary output 'mem_local_addr[23]' Warning 217: set_output_delay command matched but was not applied to primary input 'clk' Warning 218: set_output_delay command matched but was not applied to primary input 'start' Warning 219: set_output_delay command matched but was not applied to primary input 'N[0]' Warning 220: set_output_delay command matched but was not applied to primary input 'N[1]' Warning 221: set_output_delay command matched but was not applied to primary input 'N[2]' Warning 222: set_output_delay command matched but was not applied to primary input 'N[3]' Warning 223: set_output_delay command matched but was not applied to primary input 'N[4]' Warning 224: set_output_delay command matched but was not applied to primary input 'N[5]' Warning 225: set_output_delay command matched but was not applied to primary input 'N[6]' Warning 226: set_output_delay command matched but was not applied to primary input 'N[7]' Warning 227: set_output_delay command matched but was not applied to primary input 'N[8]' Warning 228: set_output_delay command matched but was not applied to primary input 'N[9]' Warning 229: set_output_delay command matched but was not applied to primary input 'N[10]' Warning 230: set_output_delay command matched but was not applied to primary input 'N[11]' Warning 231: set_output_delay command matched but was not applied to primary input 'N[12]' Warning 232: set_output_delay command matched but was not applied to primary input 'N[13]' Warning 233: set_output_delay command matched but was not applied to primary input 'N[14]' Warning 234: set_output_delay command matched but was not applied to primary input 'N[15]' Warning 235: set_output_delay command matched but was not applied to primary input 'N[16]' Warning 236: set_output_delay command matched but was not applied to primary input 'N[17]' Warning 237: set_output_delay command matched but was not applied to primary input 'N[18]' Warning 238: set_output_delay command matched but was not applied to primary input 'N[19]' Warning 239: set_output_delay command matched but was not applied to primary input 'offset[0]' Warning 240: set_output_delay command matched but was not applied to primary input 'offset[1]' Warning 241: set_output_delay command matched but was not applied to primary input 'offset[2]' Warning 242: set_output_delay command matched but was not applied to primary input 'offset[3]' Warning 243: set_output_delay command matched but was not applied to primary input 'offset[4]' Warning 244: set_output_delay command matched but was not applied to primary input 'offset[5]' Warning 245: set_output_delay command matched but was not applied to primary input 'offset[6]' Warning 246: set_output_delay command matched but was not applied to primary input 'offset[7]' Warning 247: set_output_delay command matched but was not applied to primary input 'offset[8]' Warning 248: set_output_delay command matched but was not applied to primary input 'offset[9]' Warning 249: set_output_delay command matched but was not applied to primary input 'offset[10]' Warning 250: set_output_delay command matched but was not applied to primary input 'offset[11]' Warning 251: set_output_delay command matched but was not applied to primary input 'offset[12]' Warning 252: set_output_delay command matched but was not applied to primary input 'offset[13]' Warning 253: set_output_delay command matched but was not applied to primary input 'offset[14]' Warning 254: set_output_delay command matched but was not applied to primary input 'offset[15]' Warning 255: set_output_delay command matched but was not applied to primary input 'offset[16]' Warning 256: set_output_delay command matched but was not applied to primary input 'offset[17]' Warning 257: set_output_delay command matched but was not applied to primary input 'offset[18]' Warning 258: set_output_delay command matched but was not applied to primary input 'offset[19]' Warning 259: set_output_delay command matched but was not applied to primary input 'offset[20]' Warning 260: set_output_delay command matched but was not applied to primary input 'offset[21]' Warning 261: set_output_delay command matched but was not applied to primary input 'offset[22]' Warning 262: set_output_delay command matched but was not applied to primary input 'offset[23]' Warning 263: set_output_delay command matched but was not applied to primary input 'phy_clk' Warning 264: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[0]' Warning 265: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[1]' Warning 266: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[2]' Warning 267: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[3]' Warning 268: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[4]' Warning 269: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[5]' Warning 270: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[6]' Warning 271: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[7]' Warning 272: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[8]' Warning 273: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[9]' Warning 274: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[10]' Warning 275: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[11]' Warning 276: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[12]' Warning 277: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[13]' Warning 278: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[14]' Warning 279: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[15]' Warning 280: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[16]' Warning 281: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[17]' Warning 282: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[18]' Warning 283: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[19]' Warning 284: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[20]' Warning 285: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[21]' Warning 286: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[22]' Warning 287: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[23]' Warning 288: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[24]' Warning 289: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[25]' Warning 290: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[26]' Warning 291: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[27]' Warning 292: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[28]' Warning 293: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[29]' Warning 294: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[30]' Warning 295: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[31]' Warning 296: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[32]' Warning 297: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[33]' Warning 298: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[34]' Warning 299: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[35]' Warning 300: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[36]' Warning 301: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[37]' Warning 302: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[38]' Warning 303: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[39]' Warning 304: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[40]' Warning 305: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[41]' Warning 306: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[42]' Warning 307: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[43]' Warning 308: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[44]' Warning 309: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[45]' Warning 310: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[46]' Warning 311: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[47]' Warning 312: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[48]' Warning 313: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[49]' Warning 314: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[50]' Warning 315: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[51]' Warning 316: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[52]' Warning 317: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[53]' Warning 318: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[54]' Warning 319: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[55]' Warning 320: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[56]' Warning 321: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[57]' Warning 322: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[58]' Warning 323: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[59]' Warning 324: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[60]' Warning 325: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[61]' Warning 326: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[62]' Warning 327: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[63]' Warning 328: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[64]' Warning 329: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[65]' Warning 330: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[66]' Warning 331: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[67]' Warning 332: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[68]' Warning 333: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[69]' Warning 334: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[70]' Warning 335: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[71]' Warning 336: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[72]' Warning 337: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[73]' Warning 338: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[74]' Warning 339: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[75]' Warning 340: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[76]' Warning 341: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[77]' Warning 342: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[78]' Warning 343: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[79]' Warning 344: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[80]' Warning 345: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[81]' Warning 346: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[82]' Warning 347: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[83]' Warning 348: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[84]' Warning 349: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[85]' Warning 350: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[86]' Warning 351: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[87]' Warning 352: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[88]' Warning 353: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[89]' Warning 354: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[90]' Warning 355: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[91]' Warning 356: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[92]' Warning 357: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[93]' Warning 358: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[94]' Warning 359: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[95]' Warning 360: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[96]' Warning 361: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[97]' Warning 362: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[98]' Warning 363: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[99]' Warning 364: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[100]' Warning 365: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[101]' Warning 366: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[102]' Warning 367: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[103]' Warning 368: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[104]' Warning 369: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[105]' Warning 370: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[106]' Warning 371: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[107]' Warning 372: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[108]' Warning 373: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[109]' Warning 374: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[110]' Warning 375: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[111]' Warning 376: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[112]' Warning 377: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[113]' Warning 378: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[114]' Warning 379: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[115]' Warning 380: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[116]' Warning 381: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[117]' Warning 382: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[118]' Warning 383: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[119]' Warning 384: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[120]' Warning 385: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[121]' Warning 386: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[122]' Warning 387: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[123]' Warning 388: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[124]' Warning 389: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[125]' Warning 390: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[126]' Warning 391: set_output_delay command matched but was not applied to primary input 'mem_local_rdata[127]' Warning 392: set_output_delay command matched but was not applied to primary input 'mem_local_rdata_valid' Warning 393: set_output_delay command matched but was not applied to primary input 'mem_local_ready' Warning 394: set_output_delay command matched but was not applied to primary input 'reset_n' Warning 395: get_clocks target name or pattern 'clk' matched no clocks Warning 396: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 397: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 398: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 399: get_clocks target name or pattern 'phy_clk' matched no clocks Warning 400: get_clocks target name or pattern 'clk' matched no clocks Applied 17 SDC commands from '/home/casauser/Desktop/Most-Updated-VTR/Main/vtr_flow/benchmarks/titan_blif/LU230_stratixiv_arch_timing.sdc' Timing constraints created 3 clocks Constrained Clock 'virtual_io_clock' (Virtual Clock) Constrained Clock 'clk' Source: 'clk.inpad[0]' Constrained Clock 'phy_clk' Source: 'phy_clk.inpad[0]' # Load Timing Constraints took 0.03 seconds (max_rss 2968.7 MiB, delta_rss +0.0 MiB) Timing analysis: ON Circuit netlist file: LU230_stratixiv_arch_timing.net Circuit placement file: LU230_stratixiv_arch_timing.place Circuit routing file: LU230_stratixiv_arch_timing.route Circuit SDC file: /home/casauser/Desktop/Most-Updated-VTR/Main/vtr_flow/benchmarks/titan_blif/LU230_stratixiv_arch_timing.sdc Vpr floorplanning constraints file: Packer: ENABLED Placer: ENABLED Router: ENABLED Analysis: ENABLED NetlistOpts.abosrb_buffer_luts : true NetlistOpts.sweep_dangling_primary_ios : true NetlistOpts.sweep_dangling_nets : true NetlistOpts.sweep_dangling_blocks : true NetlistOpts.sweep_constant_primary_outputs: false NetlistOpts.netlist_verbosity : 1 NetlistOpts.const_gen_inference : COMB_SEQ PackerOpts.allow_unrelated_clustering: auto PackerOpts.alpha_clustering: 0.750000 PackerOpts.beta_clustering: 0.900000 PackerOpts.cluster_seed_type: BLEND2 PackerOpts.connection_driven: true PackerOpts.global_clocks: true PackerOpts.hill_climbing_flag: false PackerOpts.inter_cluster_net_delay: 1.000000 PackerOpts.timing_driven: true PackerOpts.target_external_pin_util: auto PlacerOpts.place_freq: PLACE_ONCE PlacerOpts.place_algorithm: CRITICALITY_TIMING_PLACE PlacerOpts.pad_loc_type: FREE PlacerOpts.constraints_file: No constraints file given PlacerOpts.place_cost_exp: 1.000000 PlacerOpts.place_chan_width: 300 PlacerOpts.inner_loop_recompute_divider: 0 PlacerOpts.recompute_crit_iter: 1 PlacerOpts.timing_tradeoff: 0.500000 PlacerOpts.td_place_exp_first: 1.000000 PlacerOpts.td_place_exp_last: 8.000000 PlacerOpts.delay_offset: 0.000000 PlacerOpts.delay_ramp_delta_threshold: -1 PlacerOpts.delay_ramp_slope: 0.000000 PlacerOpts.tsu_rel_margin: 1.000000 PlacerOpts.tsu_abs_margin: 0.000000 PlacerOpts.post_place_timing_report_file: PlacerOpts.allowed_tiles_for_delay_model: PlacerOpts.delay_model_reducer: MIN PlacerOpts.delay_model_type: DELTA PlacerOpts.rlim_escape_fraction: 0.000000 PlacerOpts.move_stats_file: PlacerOpts.placement_saves_per_temperature: 0 PlacerOpts.effort_scaling: CIRCUIT PlacerOpts.place_delta_delay_matrix_calculation_method: ASTAR_ROUTE PlaceOpts.seed: 1 AnnealSched.type: AUTO_SCHED AnnealSched.inner_num: 0.500000 RouterOpts.route_type: DETAILED RouterOpts.router_algorithm: TIMING_DRIVEN RouterOpts.base_cost_type: DELAY_NORMALIZED_LENGTH RouterOpts.fixed_channel_width: 300 RouterOpts.check_route: FULL RouterOpts.acc_fac: 1.000000 RouterOpts.bb_factor: 3 RouterOpts.bend_cost: 0.000000 RouterOpts.first_iter_pres_fac: 0.000000 RouterOpts.initial_pres_fac: 1.000000 RouterOpts.pres_fac_mult: 1.300000 RouterOpts.max_router_iterations: 400 RouterOpts.min_incremental_reroute_fanout: 16 RouterOpts.do_check_rr_graph: true RouterOpts.verify_binary_search: false RouterOpts.min_channel_width_hint: 0 RouterOpts.read_rr_edge_metadata: false RouterOpts.exit_after_first_routing_iteration: false RouterOpts.astar_fac: 1.200000 RouterOpts.router_profiler_astar_fac: 1.500000 RouterOpts.criticality_exp: 1.000000 RouterOpts.max_criticality: 0.990000 RouterOpts.init_wirelength_abort_threshold: 0.850000 RouterOpts.save_routing_per_iteration: false RouterOpts.congested_routing_iteration_threshold_frac: 1.000000 RouterOpts.high_fanout_threshold: 64 RouterOpts.router_debug_net: -2 RouterOpts.router_debug_sink_rr: -2 RouterOpts.router_debug_iteration: -2 RouterOpts.max_convergence_count: 1 RouterOpts.reconvergence_cpd_threshold: 0.990000 RouterOpts.update_lower_bound_delays: true RouterOpts.first_iteration_timing_report_file: RouterOpts.incr_reroute_delay_ripup: AUTO RouterOpts.route_bb_update: DYNAMIC RouterOpts.lookahead_type: MAP RouterOpts.initial_timing: LOOKAHEAD RouterOpts.router_heap: BINARY_HEAP RouterOpts.routing_failure_predictor = SAFE RouterOpts.routing_budgets_algorithm = DISABLE AnalysisOpts.gen_post_synthesis_netlist: false AnalysisOpts.timing_report_npaths: 100 AnalysisOpts.timing_report_skew: false AnalysisOpts.echo_dot_timing_graph_node: -1 AnalysisOpts.timing_report_detail: NETLIST RoutingArch.directionality: UNI_DIRECTIONAL RoutingArch.switch_block_type: CUSTOM RoutingArch.Fs: 3 # Packing Warning 401: Block type 'M144K' grid location specification startx (33 = 33) falls outside device horizontal range [0,9] Warning 402: Block type 'EMPTY' grid location specification startx (33 = 33) falls outside device horizontal range [0,9] Begin packing 'LU230_stratixiv_arch_timing.pre-vpr.blif'. Warning 403: All 2 clocks will be treated as global. After removing unused inputs... total blocks: 568001, total nets: 663067, total inputs: 178, total outputs: 195 Begin prepacking. There is one chain in this architecture called "LAB_carry_chain" with the following starting points: LAB[0]/alm[0]/lut[0]/lcell_comb[0].cin[0] There is one chain in this architecture called "share_chain" with the following starting points: LAB[0]/alm[0]/lut[0]/lcell_comb[0].sharein[0] Finish prepacking. Using inter-cluster delay: 1.01382e-09 Packing with pin utilization targets: io:1,1 PLL:1,1 LAB:0.8,1 DSP:1,1 M9K:1,1 M144K:1,1 Packing with high fanout thresholds: io:128 PLL:128 LAB:32 DSP:128 M9K:128 M144K:128 Warning 404: 272 timing endpoints were not constrained during timing analysis Starting Clustering - Clustering Progress: ------------------- -------------------------- --------- Molecules processed Number of clusters created FPGA size ------------------- -------------------------- --------- 20882/522059 3% 978 162 x 120 41764/522059 7% 1763 162 x 120 62646/522059 11% 2529 162 x 120 83528/522059 15% 3270 162 x 120 104410/522059 19% 4444 162 x 120 125292/522059 23% 5997 241 x 179 146174/522059 27% 8680 398 x 295 167056/522059 31% 9265 424 x 314 187938/522059 35% 9874 430 x 319 208820/522059 39% 10436 430 x 319 229702/522059 43% 11062 430 x 319 250584/522059 47% 11660 430 x 319 271466/522059 51% 12269 430 x 319 292348/522059 55% 12880 430 x 319 313230/522059 59% 13538 430 x 319 334112/522059 63% 14081 430 x 319 354994/522059 67% 14627 430 x 319 375876/522059 71% 15197 430 x 319 396758/522059 75% 15768 430 x 319 417640/522059 79% 16500 430 x 319 438522/522059 83% 17259 430 x 319 459404/522059 87% 18029 430 x 319 480286/522059 91% 18883 430 x 319 501168/522059 95% 20324 430 x 319 522050/522059 99% 22106 430 x 319 Final Clustering Statistics: ---------- -------- ------------------------------------ -------------------------- Block Type # Blocks Avg. # of input clocks and pins used Avg. # of output pins used ---------- -------- ------------------------------------ -------------------------- EMPTY 0 0 0 io 373 0.522788 0.477212 PLL 0 0 0 LAB 16571 31.7954 19.9152 DSP 116 297.681 95.2759 M9K 5040 33.5248 14.2143 M144K 16 43 8 Absorbed logical nets 250054 out of 663067 nets, 413013 nets not absorbed. Incr Slack updates 1 in 0.122848 sec Full Max Req/Worst Slack updates 1 in 0.0327703 sec Incr Max Req/Worst Slack updates 0 in 0 sec Incr Criticality updates 0 in 0 sec Full Criticality updates 1 in 0.163488 sec FPGA sized to 430 x 319 (auto) Device Utilization: 0.16 (target 1.00) Block Utilization: 0.13 Type: io Block Utilization: 0.14 Type: LAB Block Utilization: 0.14 Type: DSP Block Utilization: 1.00 Type: M9K Block Utilization: 0.04 Type: M144K Netlist conversion complete. # Packing took 922.43 seconds (max_rss 6967.1 MiB, delta_rss +3998.4 MiB) # Load packing Begin loading packed FPGA netlist file. Netlist generated from file 'LU230_stratixiv_arch_timing.net'. Detected 8 constant generators (to see names run with higher pack verbosity) Finished loading packed FPGA netlist file (took 42.7608 seconds). Warning 405: Treated 12 constant nets as global which will not be routed (to see net names increase packer verbosity). # Load packing took 49.24 seconds (max_rss 6967.1 MiB, delta_rss +0.0 MiB) Warning 406: Netlist contains 33676 global net to non-global architecture pin connections Warning 407: Logic block #21899 (vcc) has only 1 output pin 'vcc.data_out[6]'. It may be a constant generator. Netlist num_nets: 413013 Netlist num_blocks: 22116 Netlist EMPTY blocks: 0. Netlist io blocks: 373. Netlist PLL blocks: 0. Netlist LAB blocks: 16571. Netlist DSP blocks: 116. Netlist M9K blocks: 5040. Netlist M144K blocks: 16. Netlist inputs pins: 178 Netlist output pins: 195 Pb types usage... io : 373 pad : 373 inpad : 178 outpad : 195 LAB : 16571 alm : 154275 lut : 208615 lcell_comb : 208613 lut6 : 2 lut : 2 dff : 293194 dffeas : 293194 DSP : 116 half_DSP : 231 mac_mult : 924 mac_mult_comb : 4 mac_mult_reg : 920 mac_out : 231 mac_out_36_bit_multiply : 1 mac_out_36_bit_multiply : 230 M9K : 5040 ram_block_M9K : 5040 prim_ram_A256x36_B256x36 : 3680 memory_slice : 29440 prim_ram_A32x36_B32x36 : 7 memory_slice : 48 prim_ram_A16x36_B16x36 : 101 memory_slice : 3516 prim_ram_A8x36_B8x36 : 92 memory_slice : 3258 prim_ram_A4x36_B4x36 : 776 memory_slice : 27890 prim_ram_dual_port_mixed_width : 384 M144K : 16 ram_block_M144K : 16 prim_ram_A16Kx9_B16Kx9 : 16 memory_slice : 128 # Create Device ## Build Device Grid FPGA sized to 430 x 319: 137170 grid tiles (auto) Resource usage... Netlist 373 blocks of type: io Architecture 2940 blocks of type: io Netlist 0 blocks of type: PLL Architecture 16 blocks of type: PLL Netlist 16571 blocks of type: LAB Architecture 122535 blocks of type: LAB Netlist 116 blocks of type: DSP Architecture 858 blocks of type: DSP Netlist 5040 blocks of type: M9K Architecture 5040 blocks of type: M9K Netlist 16 blocks of type: M144K Architecture 390 blocks of type: M144K Device Utilization: 0.16 (target 1.00) Physical Tile io: Block Utilization: 0.13 Logical Block: io Physical Tile PLL: Block Utilization: 0.00 Logical Block: PLL Physical Tile LAB: Block Utilization: 0.14 Logical Block: LAB Physical Tile DSP: Block Utilization: 0.14 Logical Block: DSP Physical Tile M9K: Block Utilization: 1.00 Logical Block: M9K Physical Tile M144K: Block Utilization: 0.04 Logical Block: M144K FPGA size limited by block type(s): M9K ## Build Device Grid took 2.85 seconds (max_rss 6967.1 MiB, delta_rss +0.0 MiB) ## Build routing resource graph Warning 408: in check_rr_node: RR node: 119746 type: OPIN location: (2,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 409: in check_rr_node: RR node: 165236 type: OPIN location: (3,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 410: in check_rr_node: RR node: 210726 type: OPIN location: (4,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 411: in check_rr_node: RR node: 440658 type: OPIN location: (7,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 412: in check_rr_node: RR node: 486148 type: OPIN location: (8,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 413: in check_rr_node: RR node: 531638 type: OPIN location: (9,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 414: in check_rr_node: RR node: 577128 type: OPIN location: (10,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 415: in check_rr_node: RR node: 622618 type: OPIN location: (11,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 416: in check_rr_node: RR node: 668108 type: OPIN location: (12,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 417: in check_rr_node: RR node: 713598 type: OPIN location: (13,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 418: in check_rr_node: RR node: 759088 type: OPIN location: (14,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 419: in check_rr_node: RR node: 804578 type: OPIN location: (15,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 420: in check_rr_node: RR node: 850068 type: OPIN location: (16,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 421: in check_rr_node: RR node: 895558 type: OPIN location: (17,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 422: in check_rr_node: RR node: 941048 type: OPIN location: (18,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 423: in check_rr_node: RR node: 986538 type: OPIN location: (19,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 424: in check_rr_node: RR node: 1032028 type: OPIN location: (20,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 425: in check_rr_node: RR node: 1077518 type: OPIN location: (21,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 426: in check_rr_node: RR node: 1123008 type: OPIN location: (22,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 427: in check_rr_node: RR node: 1168498 type: OPIN location: (23,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 428: in check_rr_node: RR node: 1213988 type: OPIN location: (24,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 429: in check_rr_node: RR node: 1259478 type: OPIN location: (25,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 430: in check_rr_node: RR node: 1304968 type: OPIN location: (26,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 431: in check_rr_node: RR node: 1350458 type: OPIN location: (27,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 432: in check_rr_node: RR node: 1395948 type: OPIN location: (28,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 433: in check_rr_node: RR node: 1441438 type: OPIN location: (29,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 434: in check_rr_node: RR node: 1486928 type: OPIN location: (30,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 435: in check_rr_node: RR node: 1624528 type: OPIN location: (32,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 436: in check_rr_node: RR node: 1712976 type: OPIN location: (34,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 437: in check_rr_node: RR node: 1758466 type: OPIN location: (35,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 438: in check_rr_node: RR node: 1803956 type: OPIN location: (36,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 439: in check_rr_node: RR node: 1849446 type: OPIN location: (37,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 440: in check_rr_node: RR node: 1894936 type: OPIN location: (38,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 441: in check_rr_node: RR node: 1940426 type: OPIN location: (39,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 442: in check_rr_node: RR node: 1985916 type: OPIN location: (40,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 443: in check_rr_node: RR node: 2031406 type: OPIN location: (41,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 444: in check_rr_node: RR node: 2076896 type: OPIN location: (42,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 445: in check_rr_node: RR node: 2122386 type: OPIN location: (43,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 446: in check_rr_node: RR node: 2167876 type: OPIN location: (44,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 447: in check_rr_node: RR node: 2213366 type: OPIN location: (45,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 448: in check_rr_node: RR node: 2351188 type: OPIN location: (47,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 449: in check_rr_node: RR node: 2396678 type: OPIN location: (48,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 450: in check_rr_node: RR node: 2442168 type: OPIN location: (49,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 451: in check_rr_node: RR node: 2487658 type: OPIN location: (50,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 452: in check_rr_node: RR node: 2533148 type: OPIN location: (51,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 453: in check_rr_node: RR node: 2578638 type: OPIN location: (52,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 454: in check_rr_node: RR node: 2624128 type: OPIN location: (53,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 455: in check_rr_node: RR node: 2669618 type: OPIN location: (54,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 456: in check_rr_node: RR node: 2715108 type: OPIN location: (55,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 457: in check_rr_node: RR node: 2760598 type: OPIN location: (56,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 458: in check_rr_node: RR node: 2898198 type: OPIN location: (58,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 459: in check_rr_node: RR node: 2943688 type: OPIN location: (59,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 460: in check_rr_node: RR node: 2989178 type: OPIN location: (60,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 461: in check_rr_node: RR node: 3034668 type: OPIN location: (61,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 462: in check_rr_node: RR node: 3080158 type: OPIN location: (62,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 463: in check_rr_node: RR node: 3125648 type: OPIN location: (63,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 464: in check_rr_node: RR node: 3171138 type: OPIN location: (64,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 465: in check_rr_node: RR node: 3216628 type: OPIN location: (65,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 466: in check_rr_node: RR node: 3262118 type: OPIN location: (66,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 467: in check_rr_node: RR node: 3307608 type: OPIN location: (67,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 468: in check_rr_node: RR node: 3353098 type: OPIN location: (68,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 469: in check_rr_node: RR node: 3398588 type: OPIN location: (69,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 470: in check_rr_node: RR node: 3444078 type: OPIN location: (70,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 471: in check_rr_node: RR node: 3489568 type: OPIN location: (71,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 472: in check_rr_node: RR node: 3535058 type: OPIN location: (72,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 473: in check_rr_node: RR node: 3580548 type: OPIN location: (73,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 474: in check_rr_node: RR node: 3626038 type: OPIN location: (74,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 475: in check_rr_node: RR node: 3671528 type: OPIN location: (75,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 476: in check_rr_node: RR node: 3759976 type: OPIN location: (77,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 477: in check_rr_node: RR node: 3805466 type: OPIN location: (78,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 478: in check_rr_node: RR node: 3850956 type: OPIN location: (79,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 479: in check_rr_node: RR node: 3896446 type: OPIN location: (80,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 480: in check_rr_node: RR node: 3941936 type: OPIN location: (81,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 481: in check_rr_node: RR node: 3987426 type: OPIN location: (82,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 482: in check_rr_node: RR node: 4125026 type: OPIN location: (84,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 483: in check_rr_node: RR node: 4170516 type: OPIN location: (85,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 484: in check_rr_node: RR node: 4308338 type: OPIN location: (87,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 485: in check_rr_node: RR node: 4353828 type: OPIN location: (88,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 486: in check_rr_node: RR node: 4399318 type: OPIN location: (89,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 487: in check_rr_node: RR node: 4444808 type: OPIN location: (90,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 488: in check_rr_node: RR node: 4490298 type: OPIN location: (91,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 489: in check_rr_node: RR node: 4535788 type: OPIN location: (92,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 490: in check_rr_node: RR node: 4581278 type: OPIN location: (93,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 491: in check_rr_node: RR node: 4626768 type: OPIN location: (94,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 492: in check_rr_node: RR node: 4672258 type: OPIN location: (95,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 493: in check_rr_node: RR node: 4717748 type: OPIN location: (96,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 494: in check_rr_node: RR node: 4763238 type: OPIN location: (97,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 495: in check_rr_node: RR node: 4808728 type: OPIN location: (98,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 496: in check_rr_node: RR node: 4854218 type: OPIN location: (99,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 497: in check_rr_node: RR node: 4899708 type: OPIN location: (100,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 498: in check_rr_node: RR node: 4945198 type: OPIN location: (101,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 499: in check_rr_node: RR node: 4990688 type: OPIN location: (102,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 500: in check_rr_node: RR node: 5036178 type: OPIN location: (103,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 501: in check_rr_node: RR node: 5081668 type: OPIN location: (104,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 502: in check_rr_node: RR node: 5127158 type: OPIN location: (105,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 503: in check_rr_node: RR node: 5172648 type: OPIN location: (106,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 504: in check_rr_node: RR node: 5218138 type: OPIN location: (107,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 505: in check_rr_node: RR node: 5263628 type: OPIN location: (108,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 506: in check_rr_node: RR node: 5401228 type: OPIN location: (110,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 507: in check_rr_node: RR node: 5446718 type: OPIN location: (111,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 508: in check_rr_node: RR node: 5492208 type: OPIN location: (112,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 509: in check_rr_node: RR node: 5537698 type: OPIN location: (113,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 510: in check_rr_node: RR node: 5583188 type: OPIN location: (114,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 511: in check_rr_node: RR node: 5628678 type: OPIN location: (115,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 512: in check_rr_node: RR node: 5674168 type: OPIN location: (116,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 513: in check_rr_node: RR node: 5719658 type: OPIN location: (117,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 514: in check_rr_node: RR node: 5765148 type: OPIN location: (118,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 515: in check_rr_node: RR node: 5853596 type: OPIN location: (120,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 516: in check_rr_node: RR node: 5899086 type: OPIN location: (121,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 517: in check_rr_node: RR node: 5944576 type: OPIN location: (122,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 518: in check_rr_node: RR node: 5990066 type: OPIN location: (123,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 519: in check_rr_node: RR node: 6035556 type: OPIN location: (124,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 520: in check_rr_node: RR node: 6081046 type: OPIN location: (125,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 521: in check_rr_node: RR node: 6218868 type: OPIN location: (127,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 522: in check_rr_node: RR node: 6264358 type: OPIN location: (128,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 523: in check_rr_node: RR node: 6309848 type: OPIN location: (129,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 524: in check_rr_node: RR node: 6355338 type: OPIN location: (130,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 525: in check_rr_node: RR node: 6400828 type: OPIN location: (131,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 526: in check_rr_node: RR node: 6446318 type: OPIN location: (132,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 527: in check_rr_node: RR node: 6491808 type: OPIN location: (133,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 528: in check_rr_node: RR node: 6537298 type: OPIN location: (134,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 529: in check_rr_node: RR node: 6674898 type: OPIN location: (136,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 530: in check_rr_node: RR node: 6720388 type: OPIN location: (137,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 531: in check_rr_node: RR node: 6765878 type: OPIN location: (138,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 532: in check_rr_node: RR node: 6811368 type: OPIN location: (139,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 533: in check_rr_node: RR node: 6856858 type: OPIN location: (140,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 534: in check_rr_node: RR node: 6902348 type: OPIN location: (141,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 535: in check_rr_node: RR node: 6947838 type: OPIN location: (142,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 536: in check_rr_node: RR node: 6993328 type: OPIN location: (143,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 537: in check_rr_node: RR node: 7038818 type: OPIN location: (144,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 538: in check_rr_node: RR node: 7084308 type: OPIN location: (145,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 539: in check_rr_node: RR node: 7129798 type: OPIN location: (146,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 540: in check_rr_node: RR node: 7175288 type: OPIN location: (147,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 541: in check_rr_node: RR node: 7220778 type: OPIN location: (148,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 542: in check_rr_node: RR node: 7266268 type: OPIN location: (149,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 543: in check_rr_node: RR node: 7311758 type: OPIN location: (150,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 544: in check_rr_node: RR node: 7357248 type: OPIN location: (151,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 545: in check_rr_node: RR node: 7402738 type: OPIN location: (152,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 546: in check_rr_node: RR node: 7448228 type: OPIN location: (153,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 547: in check_rr_node: RR node: 7493718 type: OPIN location: (154,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 548: in check_rr_node: RR node: 7539208 type: OPIN location: (155,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 549: in check_rr_node: RR node: 7584698 type: OPIN location: (156,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 550: in check_rr_node: RR node: 7630188 type: OPIN location: (157,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 551: in check_rr_node: RR node: 7675678 type: OPIN location: (158,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 552: in check_rr_node: RR node: 7721168 type: OPIN location: (159,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 553: in check_rr_node: RR node: 7766658 type: OPIN location: (160,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 554: in check_rr_node: RR node: 7947216 type: OPIN location: (163,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 555: in check_rr_node: RR node: 7992706 type: OPIN location: (164,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 556: in check_rr_node: RR node: 8038196 type: OPIN location: (165,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 557: in check_rr_node: RR node: 8176018 type: OPIN location: (167,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 558: in check_rr_node: RR node: 8221508 type: OPIN location: (168,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 559: in check_rr_node: RR node: 8266998 type: OPIN location: (169,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 560: in check_rr_node: RR node: 8312488 type: OPIN location: (170,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 561: in check_rr_node: RR node: 8357978 type: OPIN location: (171,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 562: in check_rr_node: RR node: 8403468 type: OPIN location: (172,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 563: in check_rr_node: RR node: 8448958 type: OPIN location: (173,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 564: in check_rr_node: RR node: 8494448 type: OPIN location: (174,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 565: in check_rr_node: RR node: 8539938 type: OPIN location: (175,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 566: in check_rr_node: RR node: 8585428 type: OPIN location: (176,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 567: in check_rr_node: RR node: 8630918 type: OPIN location: (177,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 568: in check_rr_node: RR node: 8676408 type: OPIN location: (178,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 569: in check_rr_node: RR node: 8721898 type: OPIN location: (179,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 570: in check_rr_node: RR node: 8767388 type: OPIN location: (180,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 571: in check_rr_node: RR node: 8812878 type: OPIN location: (181,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 572: in check_rr_node: RR node: 8858368 type: OPIN location: (182,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 573: in check_rr_node: RR node: 8903858 type: OPIN location: (183,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 574: in check_rr_node: RR node: 8949348 type: OPIN location: (184,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 575: in check_rr_node: RR node: 8994838 type: OPIN location: (185,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 576: in check_rr_node: RR node: 9040328 type: OPIN location: (186,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 577: in check_rr_node: RR node: 9177928 type: OPIN location: (188,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 578: in check_rr_node: RR node: 9223418 type: OPIN location: (189,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 579: in check_rr_node: RR node: 9268908 type: OPIN location: (190,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 580: in check_rr_node: RR node: 9314398 type: OPIN location: (191,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 581: in check_rr_node: RR node: 9359888 type: OPIN location: (192,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 582: in check_rr_node: RR node: 9405378 type: OPIN location: (193,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 583: in check_rr_node: RR node: 9450868 type: OPIN location: (194,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 584: in check_rr_node: RR node: 9496358 type: OPIN location: (195,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 585: in check_rr_node: RR node: 9541848 type: OPIN location: (196,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 586: in check_rr_node: RR node: 9587338 type: OPIN location: (197,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 587: in check_rr_node: RR node: 9632828 type: OPIN location: (198,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 588: in check_rr_node: RR node: 9678318 type: OPIN location: (199,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 589: in check_rr_node: RR node: 9723808 type: OPIN location: (200,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 590: in check_rr_node: RR node: 9769298 type: OPIN location: (201,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 591: in check_rr_node: RR node: 9814788 type: OPIN location: (202,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 592: in check_rr_node: RR node: 9860278 type: OPIN location: (203,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 593: in check_rr_node: RR node: 9905768 type: OPIN location: (204,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 594: in check_rr_node: RR node: 10086548 type: OPIN location: (207,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 595: in check_rr_node: RR node: 10132038 type: OPIN location: (208,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 596: in check_rr_node: RR node: 10177528 type: OPIN location: (209,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 597: in check_rr_node: RR node: 10223018 type: OPIN location: (210,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 598: in check_rr_node: RR node: 10268508 type: OPIN location: (211,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 599: in check_rr_node: RR node: 10313998 type: OPIN location: (212,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 600: in check_rr_node: RR node: 10451290 type: OPIN location: (214,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 601: in check_rr_node: RR node: 10496164 type: OPIN location: (215,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 602: in check_rr_node: RR node: 10541038 type: OPIN location: (216,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 603: in check_rr_node: RR node: 10585912 type: OPIN location: (217,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 604: in check_rr_node: RR node: 10631094 type: OPIN location: (218,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 605: in check_rr_node: RR node: 10676584 type: OPIN location: (219,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 606: in check_rr_node: RR node: 10722074 type: OPIN location: (220,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 607: in check_rr_node: RR node: 10767564 type: OPIN location: (221,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 608: in check_rr_node: RR node: 10813054 type: OPIN location: (222,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 609: in check_rr_node: RR node: 10858544 type: OPIN location: (223,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 610: in check_rr_node: RR node: 10904034 type: OPIN location: (224,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 611: in check_rr_node: RR node: 10949524 type: OPIN location: (225,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 612: in check_rr_node: RR node: 10995014 type: OPIN location: (226,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 613: in check_rr_node: RR node: 11040504 type: OPIN location: (227,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 614: in check_rr_node: RR node: 11085994 type: OPIN location: (228,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 615: in check_rr_node: RR node: 11131484 type: OPIN location: (229,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 616: in check_rr_node: RR node: 11176974 type: OPIN location: (230,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 617: in check_rr_node: RR node: 11222464 type: OPIN location: (231,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 618: in check_rr_node: RR node: 11267954 type: OPIN location: (232,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 619: in check_rr_node: RR node: 11313444 type: OPIN location: (233,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 620: in check_rr_node: RR node: 11358934 type: OPIN location: (234,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 621: in check_rr_node: RR node: 11404424 type: OPIN location: (235,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 622: in check_rr_node: RR node: 11449914 type: OPIN location: (236,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 623: in check_rr_node: RR node: 11495404 type: OPIN location: (237,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 624: in check_rr_node: RR node: 11540894 type: OPIN location: (238,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 625: in check_rr_node: RR node: 11678494 type: OPIN location: (240,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 626: in check_rr_node: RR node: 11723984 type: OPIN location: (241,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 627: in check_rr_node: RR node: 11769474 type: OPIN location: (242,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 628: in check_rr_node: RR node: 11814964 type: OPIN location: (243,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 629: in check_rr_node: RR node: 11860454 type: OPIN location: (244,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 630: in check_rr_node: RR node: 11905944 type: OPIN location: (245,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 631: in check_rr_node: RR node: 12043766 type: OPIN location: (247,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 632: in check_rr_node: RR node: 12132214 type: OPIN location: (249,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 633: in check_rr_node: RR node: 12177704 type: OPIN location: (250,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 634: in check_rr_node: RR node: 12223194 type: OPIN location: (251,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 635: in check_rr_node: RR node: 12268684 type: OPIN location: (252,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 636: in check_rr_node: RR node: 12314174 type: OPIN location: (253,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 637: in check_rr_node: RR node: 12359664 type: OPIN location: (254,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 638: in check_rr_node: RR node: 12405154 type: OPIN location: (255,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 639: in check_rr_node: RR node: 12450644 type: OPIN location: (256,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 640: in check_rr_node: RR node: 12496134 type: OPIN location: (257,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 641: in check_rr_node: RR node: 12541624 type: OPIN location: (258,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 642: in check_rr_node: RR node: 12587114 type: OPIN location: (259,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 643: in check_rr_node: RR node: 12632604 type: OPIN location: (260,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 644: in check_rr_node: RR node: 12678094 type: OPIN location: (261,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 645: in check_rr_node: RR node: 12723584 type: OPIN location: (262,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 646: in check_rr_node: RR node: 12769074 type: OPIN location: (263,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 647: in check_rr_node: RR node: 12814564 type: OPIN location: (264,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 648: in check_rr_node: RR node: 12952164 type: OPIN location: (266,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 649: in check_rr_node: RR node: 12997654 type: OPIN location: (267,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 650: in check_rr_node: RR node: 13043144 type: OPIN location: (268,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 651: in check_rr_node: RR node: 13088634 type: OPIN location: (269,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 652: in check_rr_node: RR node: 13134124 type: OPIN location: (270,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 653: in check_rr_node: RR node: 13179614 type: OPIN location: (271,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 654: in check_rr_node: RR node: 13225104 type: OPIN location: (272,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 655: in check_rr_node: RR node: 13270594 type: OPIN location: (273,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 656: in check_rr_node: RR node: 13316084 type: OPIN location: (274,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 657: in check_rr_node: RR node: 13361574 type: OPIN location: (275,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 658: in check_rr_node: RR node: 13407064 type: OPIN location: (276,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 659: in check_rr_node: RR node: 13452554 type: OPIN location: (277,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 660: in check_rr_node: RR node: 13498044 type: OPIN location: (278,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 661: in check_rr_node: RR node: 13543534 type: OPIN location: (279,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 662: in check_rr_node: RR node: 13589024 type: OPIN location: (280,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 663: in check_rr_node: RR node: 13634514 type: OPIN location: (281,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 664: in check_rr_node: RR node: 13680004 type: OPIN location: (282,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 665: in check_rr_node: RR node: 13725494 type: OPIN location: (283,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 666: in check_rr_node: RR node: 13770984 type: OPIN location: (284,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 667: in check_rr_node: RR node: 13816474 type: OPIN location: (285,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 668: in check_rr_node: RR node: 13954296 type: OPIN location: (287,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 669: in check_rr_node: RR node: 13999786 type: OPIN location: (288,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 670: in check_rr_node: RR node: 14045276 type: OPIN location: (289,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 671: in check_rr_node: RR node: 14090766 type: OPIN location: (290,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 672: in check_rr_node: RR node: 14179214 type: OPIN location: (292,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 673: in check_rr_node: RR node: 14224704 type: OPIN location: (293,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 674: in check_rr_node: RR node: 14270194 type: OPIN location: (294,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 675: in check_rr_node: RR node: 14315684 type: OPIN location: (295,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 676: in check_rr_node: RR node: 14361174 type: OPIN location: (296,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 677: in check_rr_node: RR node: 14406664 type: OPIN location: (297,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 678: in check_rr_node: RR node: 14452154 type: OPIN location: (298,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 679: in check_rr_node: RR node: 14497644 type: OPIN location: (299,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 680: in check_rr_node: RR node: 14543134 type: OPIN location: (300,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 681: in check_rr_node: RR node: 14588624 type: OPIN location: (301,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 682: in check_rr_node: RR node: 14634114 type: OPIN location: (302,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 683: in check_rr_node: RR node: 14679604 type: OPIN location: (303,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 684: in check_rr_node: RR node: 14725094 type: OPIN location: (304,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 685: in check_rr_node: RR node: 14770584 type: OPIN location: (305,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 686: in check_rr_node: RR node: 14816074 type: OPIN location: (306,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 687: in check_rr_node: RR node: 14861564 type: OPIN location: (307,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 688: in check_rr_node: RR node: 14907054 type: OPIN location: (308,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 689: in check_rr_node: RR node: 14952544 type: OPIN location: (309,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 690: in check_rr_node: RR node: 14998034 type: OPIN location: (310,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 691: in check_rr_node: RR node: 15043524 type: OPIN location: (311,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 692: in check_rr_node: RR node: 15089014 type: OPIN location: (312,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 693: in check_rr_node: RR node: 15134504 type: OPIN location: (313,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 694: in check_rr_node: RR node: 15179994 type: OPIN location: (314,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 695: in check_rr_node: RR node: 15225484 type: OPIN location: (315,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 696: in check_rr_node: RR node: 15270974 type: OPIN location: (316,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 697: in check_rr_node: RR node: 15408574 type: OPIN location: (318,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 698: in check_rr_node: RR node: 15454064 type: OPIN location: (319,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 699: in check_rr_node: RR node: 15499554 type: OPIN location: (320,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 700: in check_rr_node: RR node: 15545044 type: OPIN location: (321,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 701: in check_rr_node: RR node: 15590534 type: OPIN location: (322,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 702: in check_rr_node: RR node: 15636024 type: OPIN location: (323,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 703: in check_rr_node: RR node: 15681514 type: OPIN location: (324,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 704: in check_rr_node: RR node: 15727004 type: OPIN location: (325,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 705: in check_rr_node: RR node: 15864826 type: OPIN location: (327,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 706: in check_rr_node: RR node: 15910316 type: OPIN location: (328,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 707: in check_rr_node: RR node: 15955806 type: OPIN location: (329,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 708: in check_rr_node: RR node: 16001296 type: OPIN location: (330,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 709: in check_rr_node: RR node: 16046786 type: OPIN location: (331,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 710: in check_rr_node: RR node: 16092276 type: OPIN location: (332,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 711: in check_rr_node: RR node: 16137766 type: OPIN location: (333,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 712: in check_rr_node: RR node: 16226214 type: OPIN location: (335,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 713: in check_rr_node: RR node: 16271704 type: OPIN location: (336,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 714: in check_rr_node: RR node: 16317194 type: OPIN location: (337,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 715: in check_rr_node: RR node: 16362684 type: OPIN location: (338,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 716: in check_rr_node: RR node: 16408174 type: OPIN location: (339,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 717: in check_rr_node: RR node: 16453664 type: OPIN location: (340,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 718: in check_rr_node: RR node: 16499154 type: OPIN location: (341,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 719: in check_rr_node: RR node: 16544644 type: OPIN location: (342,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 720: in check_rr_node: RR node: 16682244 type: OPIN location: (344,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 721: in check_rr_node: RR node: 16727734 type: OPIN location: (345,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 722: in check_rr_node: RR node: 16773224 type: OPIN location: (346,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 723: in check_rr_node: RR node: 16818714 type: OPIN location: (347,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 724: in check_rr_node: RR node: 16864204 type: OPIN location: (348,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 725: in check_rr_node: RR node: 16909694 type: OPIN location: (349,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 726: in check_rr_node: RR node: 16955184 type: OPIN location: (350,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 727: in check_rr_node: RR node: 17000674 type: OPIN location: (351,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 728: in check_rr_node: RR node: 17046164 type: OPIN location: (352,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 729: in check_rr_node: RR node: 17091654 type: OPIN location: (353,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 730: in check_rr_node: RR node: 17137144 type: OPIN location: (354,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 731: in check_rr_node: RR node: 17182634 type: OPIN location: (355,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 732: in check_rr_node: RR node: 17228124 type: OPIN location: (356,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 733: in check_rr_node: RR node: 17273614 type: OPIN location: (357,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 734: in check_rr_node: RR node: 17319104 type: OPIN location: (358,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 735: in check_rr_node: RR node: 17364594 type: OPIN location: (359,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 736: in check_rr_node: RR node: 17410084 type: OPIN location: (360,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 737: in check_rr_node: RR node: 17455574 type: OPIN location: (361,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 738: in check_rr_node: RR node: 17501064 type: OPIN location: (362,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 739: in check_rr_node: RR node: 17546554 type: OPIN location: (363,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 740: in check_rr_node: RR node: 17592044 type: OPIN location: (364,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 741: in check_rr_node: RR node: 17637534 type: OPIN location: (365,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 742: in check_rr_node: RR node: 17775356 type: OPIN location: (367,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 743: in check_rr_node: RR node: 17820846 type: OPIN location: (368,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 744: in check_rr_node: RR node: 17958446 type: OPIN location: (370,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 745: in check_rr_node: RR node: 18003936 type: OPIN location: (371,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 746: in check_rr_node: RR node: 18049426 type: OPIN location: (372,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 747: in check_rr_node: RR node: 18094916 type: OPIN location: (373,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 748: in check_rr_node: RR node: 18140406 type: OPIN location: (374,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 749: in check_rr_node: RR node: 18185896 type: OPIN location: (375,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 750: in check_rr_node: RR node: 18231386 type: OPIN location: (376,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 751: in check_rr_node: RR node: 18319834 type: OPIN location: (378,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 752: in check_rr_node: RR node: 18365324 type: OPIN location: (379,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 753: in check_rr_node: RR node: 18410814 type: OPIN location: (380,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 754: in check_rr_node: RR node: 18456304 type: OPIN location: (381,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 755: in check_rr_node: RR node: 18501794 type: OPIN location: (382,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 756: in check_rr_node: RR node: 18547284 type: OPIN location: (383,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 757: in check_rr_node: RR node: 18592774 type: OPIN location: (384,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 758: in check_rr_node: RR node: 18638264 type: OPIN location: (385,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 759: in check_rr_node: RR node: 18683754 type: OPIN location: (386,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 760: in check_rr_node: RR node: 18729244 type: OPIN location: (387,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 761: in check_rr_node: RR node: 18774734 type: OPIN location: (388,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 762: in check_rr_node: RR node: 18820224 type: OPIN location: (389,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 763: in check_rr_node: RR node: 18865714 type: OPIN location: (390,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 764: in check_rr_node: RR node: 18911204 type: OPIN location: (391,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 765: in check_rr_node: RR node: 18956694 type: OPIN location: (392,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 766: in check_rr_node: RR node: 19002184 type: OPIN location: (393,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 767: in check_rr_node: RR node: 19047674 type: OPIN location: (394,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 768: in check_rr_node: RR node: 19185274 type: OPIN location: (396,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 769: in check_rr_node: RR node: 19230764 type: OPIN location: (397,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 770: in check_rr_node: RR node: 19276254 type: OPIN location: (398,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 771: in check_rr_node: RR node: 19321744 type: OPIN location: (399,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 772: in check_rr_node: RR node: 19367234 type: OPIN location: (400,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 773: in check_rr_node: RR node: 19412724 type: OPIN location: (401,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 774: in check_rr_node: RR node: 19458214 type: OPIN location: (402,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 775: in check_rr_node: RR node: 19503704 type: OPIN location: (403,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 776: in check_rr_node: RR node: 19549194 type: OPIN location: (404,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 777: in check_rr_node: RR node: 19594684 type: OPIN location: (405,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 778: in check_rr_node: RR node: 19732506 type: OPIN location: (407,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 779: in check_rr_node: RR node: 19777996 type: OPIN location: (408,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 780: in check_rr_node: RR node: 19823486 type: OPIN location: (409,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 781: in check_rr_node: RR node: 19868976 type: OPIN location: (410,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 782: in check_rr_node: RR node: 19914466 type: OPIN location: (411,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 783: in check_rr_node: RR node: 19959956 type: OPIN location: (412,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 784: in check_rr_node: RR node: 20005446 type: OPIN location: (413,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 785: in check_rr_node: RR node: 20050936 type: OPIN location: (414,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 786: in check_rr_node: RR node: 20096426 type: OPIN location: (415,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 787: in check_rr_node: RR node: 20141916 type: OPIN location: (416,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 788: in check_rr_node: RR node: 20187406 type: OPIN location: (417,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 789: in check_rr_node: RR node: 20232896 type: OPIN location: (418,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 790: in check_rr_node: RR node: 20278386 type: OPIN location: (419,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 791: in check_rr_node: RR node: 20458944 type: OPIN location: (422,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 792: in check_rr_node: RR node: 20504434 type: OPIN location: (423,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 793: in check_rr_node: RR node: 20549924 type: OPIN location: (424,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 794: in check_rr_node: RR node: 20595414 type: OPIN location: (425,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 795: in check_rr_node: RR node: 20640904 type: OPIN location: (426,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. Warning 796: in check_rr_node: RR node: 20686394 type: OPIN location: (427,2) pin: 129 pin_name: LAB.cout[0] capacity: 1 fan-in: 1 fan-out: 0 has no out-going edges. ## Build routing resource graph took 375.07 seconds (max_rss 19363.0 MiB, delta_rss +12395.9 MiB) RR Graph Nodes: 39390806 RR Graph Edges: 435733603 # Create Device took 383.96 seconds (max_rss 19363.0 MiB, delta_rss +12395.9 MiB) # Computing router lookahead map ## Computing wire lookahead ## Computing wire lookahead took 1330.87 seconds (max_rss 19363.0 MiB, delta_rss +0.0 MiB) ## Computing src/opin lookahead ## Computing src/opin lookahead took 0.00 seconds (max_rss 19363.0 MiB, delta_rss +0.0 MiB) # Computing router lookahead map took 1330.88 seconds (max_rss 19363.0 MiB, delta_rss +0.0 MiB) # Computing placement delta delay look-up RR graph channel widths unchanged, skipping RR graph rebuild ## Computing delta delays ## Computing delta delays took 362.41 seconds (max_rss 19363.0 MiB, delta_rss +0.0 MiB) # Computing placement delta delay look-up took 362.90 seconds (max_rss 19363.0 MiB, delta_rss +0.0 MiB) Using simple RL 'Softmax agent' for choosing move types # Placement ## Initial Placement ## Initial Placement took 0.04 seconds (max_rss 19363.0 MiB, delta_rss +0.0 MiB) There are 675581 point to point connections in this circuit. Warning 797: 272 timing endpoints were not constrained during timing analysis BB estimate of min-dist (placement) wire length: 108465748 Completed placement consistency check successfully. Initial placement cost: 1 bb_cost: 361553 td_cost: 0.000267219 Initial placement estimated Critical Path Delay (CPD): 131.875 ns Initial placement estimated setup Total Negative Slack (sTNS): -6.37234e+06 ns Initial placement estimated setup Worst Negative Slack (sWNS): -130.875 ns Initial placement estimated setup slack histogram: [ -1.3e-07: -1.2e-07) 3 ( 0.0%) | [ -1.2e-07: -1e-07) 4 ( 0.0%) | [ -1e-07: -9.1e-08) 2 ( 0.0%) | [ -9.1e-08: -7.8e-08) 3 ( 0.0%) | [ -7.8e-08: -6.5e-08) 3 ( 0.0%) | [ -6.5e-08: -5.2e-08) 0 ( 0.0%) | [ -5.2e-08: -3.9e-08) 36 ( 0.0%) | [ -3.9e-08: -2.6e-08) 2442 ( 0.2%) | [ -2.6e-08: -1.2e-08) 60164 ( 4.4%) |** [ -1.2e-08: 8.4e-10) 1296604 ( 95.4%) |******************************************* Placement contains 249 placement macros involving 498 blocks (average macro size 2.000000) Moves per temperature: 310289 Warning 798: Starting t: 22109 of 22116 configurations accepted. ---- ------ ------- ------- ---------- ---------- ------- ---------- -------- ------- ------- ------ -------- --------- ------ Tnum Time T Av Cost Av BB Cost Av TD Cost CPD sTNS sWNS Ac Rate Std Dev R lim Crit Exp Tot Moves Alpha (sec) (ns) (ns) (ns) ---- ------ ------- ------- ---------- ---------- ------- ---------- -------- ------- ------- ------ -------- --------- ------ 1 9.1 1.2e+00 0.933 295039.16 0.00018836 122.274 -5.62e+06 -121.274 1.000 0.0405 429.0 1.00 310289 0.200 2 9.6 5.9e-01 0.930 273424.14 0.00015053 136.799 -5.47e+06 -135.799 0.999 0.0120 429.0 1.00 620578 0.500 3 9.6 2.9e-01 0.934 271431.80 0.00014979 135.711 -5.55e+06 -134.711 0.999 0.0114 429.0 1.00 930867 0.500 4 9.7 1.5e-01 0.938 270187.51 0.00018772 104.509 -5.29e+06 -103.509 0.999 0.0104 429.0 1.00 1241156 0.500 5 9.8 7.3e-02 0.920 266644.36 0.00013698 148.359 -5.7e+06 -147.359 0.999 0.0143 429.0 1.00 1551445 0.500 6 9.8 3.7e-02 0.939 263218.94 0.00018217 103.964 -5.15e+06 -102.964 0.999 0.0106 429.0 1.00 1861734 0.500 7 10.2 1.8e-02 0.942 263863.32 0.00018825 100.541 -5.19e+06 -99.541 0.999 0.0111 429.0 1.00 2172023 0.500 8 11.1 9.2e-03 0.933 263558.47 0.00019463 97.501 -5.34e+06 -96.501 0.998 0.0140 429.0 1.00 2482312 0.500 9 10.9 4.6e-03 0.934 261923.68 0.00018466 100.326 -5.24e+06 -99.326 0.997 0.0119 429.0 1.00 2792601 0.500 10 10.5 2.3e-03 0.937 261719.00 0.00022533 81.429 -5.23e+06 -80.429 0.994 0.0114 429.0 1.00 3102890 0.500 11 10.8 1.1e-03 0.932 259600.50 0.00014703 125.082 -5.16e+06 -124.082 0.989 0.0109 429.0 1.00 3413179 0.500 12 10.4 5.7e-04 0.920 256017.19 0.00014499 122.662 -5.17e+06 -121.662 0.977 0.0163 429.0 1.00 3723468 0.500 13 10.4 2.9e-04 0.917 249073.18 0.00019799 83.917 -5.01e+06 -82.917 0.956 0.0141 429.0 1.00 4033757 0.500 14 10.4 2.6e-04 0.933 246778.24 0.00021368 75.321 -4.77e+06 -74.321 0.951 0.0116 429.0 1.00 4344046 0.900 15 10.8 2.3e-04 0.932 245201.48 0.00016764 95.766 -4.74e+06 -94.766 0.945 0.0111 429.0 1.00 4654335 0.900 16 10.2 2.1e-04 0.938 242685.20 0.00020124 77.306 -4.76e+06 -76.306 0.939 0.0120 429.0 1.00 4964624 0.900 17 10.1 1.9e-04 0.937 240499.82 0.00018731 82.601 -4.71e+06 -81.601 0.932 0.0100 429.0 1.00 5274913 0.900 18 10.2 1.7e-04 0.932 238069.40 0.00034437 42.777 -4.71e+06 -41.777 0.924 0.0118 429.0 1.00 5585202 0.900 19 10.2 1.5e-04 0.925 235122.93 0.00014564 104.918 -4.69e+06 -103.918 0.917 0.0142 429.0 1.00 5895491 0.900 20 10.4 1.4e-04 0.932 231164.67 0.00022941 62.430 -4.7e+06 -61.430 0.905 0.0125 429.0 1.00 6205780 0.900 21 10.8 1.2e-04 0.932 228667.59 0.00021066 66.991 -4.63e+06 -65.991 0.896 0.0119 429.0 1.00 6516069 0.900 22 10.3 1.1e-04 0.923 225736.90 0.00019803 70.614 -4.62e+06 -69.614 0.883 0.0161 429.0 1.00 6826358 0.900 23 10.3 1.0e-04 0.926 221033.47 0.00026947 49.247 -4.59e+06 -48.247 0.871 0.0148 429.0 1.00 7136647 0.900 24 10.3 9.0e-05 0.925 216555.58 0.00019727 66.288 -4.48e+06 -65.288 0.854 0.0163 429.0 1.00 7446936 0.900 25 10.3 8.1e-05 0.920 211951.81 0.00024485 51.237 -4.45e+06 -50.237 0.839 0.0155 429.0 1.00 7757225 0.900 26 10.3 7.3e-05 0.920 206436.18 0.00025955 46.185 -4.45e+06 -45.185 0.818 0.0181 429.0 1.00 8067514 0.900 27 10.4 6.6e-05 0.918 199018.37 0.00020673 55.787 -4.35e+06 -54.787 0.797 0.0180 429.0 1.00 8377803 0.900 28 10.5 6.2e-05 0.922 193287.43 0.00028136 38.769 -4.37e+06 -37.769 0.784 0.0184 429.0 1.00 8688092 0.950 29 10.5 5.9e-05 0.933 188869.66 0.00023753 44.593 -4.24e+06 -43.593 0.767 0.0147 429.0 1.00 8998381 0.950 30 10.4 5.6e-05 0.925 184909.90 0.00030159 33.716 -4.19e+06 -32.716 0.757 0.0198 429.0 1.00 9308670 0.950 31 10.3 5.3e-05 0.920 178221.56 0.00024767 39.517 -4.17e+06 -38.517 0.740 0.0214 429.0 1.00 9618959 0.950 32 10.3 5.1e-05 0.923 169992.14 0.00028701 31.774 -4.1e+06 -30.774 0.723 0.0196 429.0 1.00 9929248 0.950 33 10.2 4.8e-05 0.913 162274.16 0.00026057 33.257 -3.99e+06 -32.257 0.709 0.0231 429.0 1.00 10239537 0.950 34 10.2 4.6e-05 0.911 152452.83 0.00023395 34.786 -3.97e+06 -33.786 0.686 0.0246 429.0 1.00 10549826 0.950 35 10.2 4.3e-05 0.909 141911.81 0.00019672 38.388 -3.84e+06 -37.388 0.670 0.0274 429.0 1.00 10860115 0.950 Command terminated by signal 9 Command being timed: "/home/casauser/Desktop/Most-Updated-VTR/Main/vpr/vpr stratixiv_arch.timing.xml LU230_stratixiv_arch_timing --circuit_file LU230_stratixiv_arch_timing.pre-vpr.blif --route_chan_width 300 --max_router_iterations 400 --router_lookahead map --initial_pres_fac 1.0 --router_profiler_astar_fac 1.5 --sdc_file /home/casauser/Desktop/Most-Updated-VTR/Main/vtr_flow/benchmarks/titan_blif/LU230_stratixiv_arch_timing.sdc" User time (seconds): 3440.41 System time (seconds): 24.98 Percent of CPU this job got: 99% Elapsed (wall clock) time (h:mm:ss or m:ss): 57:46.64 Average shared text size (kbytes): 0 Average unshared data size (kbytes): 0 Average stack size (kbytes): 0 Average total size (kbytes): 0 Maximum resident set size (kbytes): 19827692 Average resident set size (kbytes): 0 Major (requiring I/O) page faults: 2 Minor (reclaiming a frame) page faults: 30430440 Voluntary context switches: 5 Involuntary context switches: 18574 Swaps: 0 File system inputs: 520 File system outputs: 2600080 Socket messages sent: 0 Socket messages received: 0 Signals delivered: 0 Page size (bytes): 4096 Exit status: 0