Merge pull request #94 from tasmota/espressif-esp32-s3-support

Espressif esp32 s3 support

Author: Jason2866

Diff for: libraries/WiFi/examples/WiFiScanDualAntenna/WiFiScanDualAntenna.ino

@@ -24,7 +24,12 @@ void setup()
     // Set WiFi to station mode and disconnect from an AP if it was previously connected
     WiFi.mode(WIFI_STA);
 
-    // Set WiFi dual antenna configuration by passing the GPIO and antenna mode for RX ant TX
+    /* Attention: This is the manual prodecure for the dual antenna configuration.
+     * If you choose the ESP32-WROOM-DA module from the Tools -> Board, this configuration
+     * is not necessary!
+     * 
+     * Set WiFi dual antenna configuration by passing the GPIO and antenna mode for RX ant TX
+     */ 
     err = WiFi.setDualAntennaConfig(GPIO_ANT1, GPIO_ANT1, WIFI_RX_ANT_AUTO, WIFI_TX_ANT_AUTO);
 
     /* For more details on how to use this feature, see our docs:

Diff for: variants/esp32da/pins_arduino.h

@@ -0,0 +1,60 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define EXTERNAL_NUM_INTERRUPTS 16
+#define NUM_DIGITAL_PINS        40
+#define NUM_ANALOG_INPUTS       16
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 34)
+
+static const uint8_t TX = 1;
+static const uint8_t RX = 3;
+
+static const uint8_t SDA = 21;
+static const uint8_t SCL = 22;
+
+static const uint8_t SS    = 5;
+static const uint8_t MOSI  = 23;
+static const uint8_t MISO  = 19;
+static const uint8_t SCK   = 18;
+
+static const uint8_t A0 = 36;
+static const uint8_t A3 = 39;
+static const uint8_t A4 = 32;
+static const uint8_t A5 = 33;
+static const uint8_t A6 = 34;
+static const uint8_t A7 = 35;
+static const uint8_t A10 = 4;
+static const uint8_t A11 = 0;
+static const uint8_t A12 = 2;
+static const uint8_t A13 = 15;
+static const uint8_t A14 = 13;
+static const uint8_t A15 = 12;
+static const uint8_t A16 = 14;
+static const uint8_t A17 = 27;
+static const uint8_t A18 = 25;
+static const uint8_t A19 = 26;
+
+static const uint8_t T0 = 4;
+static const uint8_t T1 = 0;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 15;
+static const uint8_t T4 = 13;
+static const uint8_t T5 = 12;
+static const uint8_t T6 = 14;
+static const uint8_t T7 = 27;
+static const uint8_t T8 = 33;
+static const uint8_t T9 = 32;
+
+static const uint8_t DAC1 = 25;
+static const uint8_t DAC2 = 26;
+
+#define BOARD_HAS_DUAL_ANTENNA
+static const uint8_t ANT1 = 2;
+static const uint8_t ANT2 = 25;
+
+#endif /* Pins_Arduino_h */