mqtt_STM32Ethernet.ino doesn't compile with Nucleo H743ZI2

[fauresystems]

mqtt_STM32Ethernet.ino compiles with Nucleo F767ZI

but not with Nucleo H743ZI2 (neither with H743ZI)

`
Arduino: 1.8.12 (Windows 10), Board: "Nucleo-144, Nucleo H743ZI2, Mass Storage, Enabled (generic 'Serial'), None, Low/Full Speed, Smallest (-Os default), Newlib Standard"

C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:80:48: error: 'ETH_RXBUFNB' was not declared in this scope
80 | __ALIGN_BEGIN ETH_DMADescTypeDef DMARxDscrTab[ETH_RXBUFNB] __ALIGN_END;/* Ethernet Rx MA Descriptor /
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:85:48: error: 'ETH_TXBUFNB' was not declared in this scope
85 | __ALIGN_BEGIN ETH_DMADescTypeDef DMATxDscrTab[ETH_TXBUFNB] __ALIGN_END;/ Ethernet Tx DMA Descriptor /
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:90:31: error: 'ETH_RXBUFNB' was not declared in this scope
90 | __ALIGN_BEGIN uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE] __ALIGN_END; / Ethernet Receive Buffer /
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:90:44: error: 'ETH_RX_BUF_SIZE' was not declared in this scope
90 | __ALIGN_BEGIN uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE] __ALIGN_END; / Ethernet Receive Buffer /
| ^~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:95:31: error: 'ETH_TXBUFNB' was not declared in this scope
95 | __ALIGN_BEGIN uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE] __ALIGN_END; / Ethernet Transmit Buffer /
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:95:44: error: 'ETH_TX_BUF_SIZE' was not declared in this scope
95 | __ALIGN_BEGIN uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE] __ALIGN_END; / Ethernet Transmit Buffer /
| ^~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:99:34: error: 'MAC_ADDR0' was not declared in this scope; did you mean 'GW_ADDR0'?
99 | static uint8_t macaddress[6] = { MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, MAC_ADDR3, MAC_ADDR4, MAC_ADDR5 };
| ^~~~~~~~~
| GW_ADDR0
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:99:45: error: 'MAC_ADDR1' was not declared in this scope; did you mean 'GW_ADDR1'?
99 | static uint8_t macaddress[6] = { MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, MAC_ADDR3, MAC_ADDR4, MAC_ADDR5 };
| ^~~~~~~~~
| GW_ADDR1
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:99:56: error: 'MAC_ADDR2' was not declared in this scope; did you mean 'IP_ADDR2'?
99 | static uint8_t macaddress[6] = { MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, MAC_ADDR3, MAC_ADDR4, MAC_ADDR5 };
| ^~~~~~~~~
| IP_ADDR2
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:99:67: error: 'MAC_ADDR3' was not declared in this scope; did you mean 'GW_ADDR3'?
99 | static uint8_t macaddress[6] = { MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, MAC_ADDR3, MAC_ADDR4, MAC_ADDR5 };
| ^~~~~~~~~
| GW_ADDR3
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:99:78: error: 'MAC_ADDR4' was not declared in this scope; did you mean 'IP_ADDR4'?
99 | static uint8_t macaddress[6] = { MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, MAC_ADDR3, MAC_ADDR4, MAC_ADDR5 };
| ^~~~~~~~~
| IP_ADDR4
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:99:89: error: 'MAC_ADDR5' was not declared in this scope
99 | static uint8_t macaddress[6] = { MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, MAC_ADDR3, MAC_ADDR4, MAC_ADDR5 };
| ^~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void HAL_ETH_MspInit(ETH_HandleTypeDef)':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:151:3: error: '__HAL_RCC_ETH_CLK_ENABLE' was not declared in this scope
151 | __HAL_RCC_ETH_CLK_ENABLE();
| ^~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void low_level_init(netif*)':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:170:18: error: 'struct ETH_InitTypeDef' has no member named 'AutoNegotiation'
170 | EthHandle.Init.AutoNegotiation = ETH_AUTONEGOTIATION_ENABLE;
| ^~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:170:36: error: 'ETH_AUTONEGOTIATION_ENABLE' was not declared in this scope
170 | EthHandle.Init.AutoNegotiation = ETH_AUTONEGOTIATION_ENABLE;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:171:18: error: 'struct ETH_InitTypeDef' has no member named 'Speed'
171 | EthHandle.Init.Speed = ETH_SPEED_100M;
| ^~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:172:18: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'
172 | EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;
| ^~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:172:31: error: 'ETH_MODE_FULLDUPLEX' was not declared in this scope
172 | EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;
| ^~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:174:35: error: 'ETH_MEDIA_INTERFACE_RMII' was not declared in this scope
174 | EthHandle.Init.MediaInterface = ETH_MEDIA_INTERFACE_RMII;
| ^~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:181:18: error: 'struct ETH_InitTypeDef' has no member named 'RxMode'
181 | EthHandle.Init.RxMode = ETH_RXPOLLING_MODE;
| ^~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:181:27: error: 'ETH_RXPOLLING_MODE' was not declared in this scope
181 | EthHandle.Init.RxMode = ETH_RXPOLLING_MODE;
| ^~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:183:18: error: 'struct ETH_InitTypeDef' has no member named 'ChecksumMode'
183 | EthHandle.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:183:33: error: 'ETH_CHECKSUM_BY_HARDWARE' was not declared in this scope; did you mean 'CHECKSUM_BY_HARDWARE'?
183 | EthHandle.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
| ^~~~~~~~~~~~~~~~~~~~~~~~
| CHECKSUM_BY_HARDWARE
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:184:18: error: 'struct ETH_InitTypeDef' has no member named 'PhyAddress'
184 | EthHandle.Init.PhyAddress = LAN8742A_PHY_ADDRESS;
| ^~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:184:31: error: 'LAN8742A_PHY_ADDRESS' was not declared in this scope
184 | EthHandle.Init.PhyAddress = LAN8742A_PHY_ADDRESS;
| ^~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:193:41: error: 'DMATxDscrTab' was not declared in this scope
193 | HAL_ETH_DMATxDescListInit(&EthHandle, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:193:56: error: 'Tx_Buff' was not declared in this scope
193 | HAL_ETH_DMATxDescListInit(&EthHandle, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:193:71: error: 'ETH_TXBUFNB' was not declared in this scope
193 | HAL_ETH_DMATxDescListInit(&EthHandle, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:193:3: error: 'HAL_ETH_DMATxDescListInit' was not declared in this scope
193 | HAL_ETH_DMATxDescListInit(&EthHandle, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:196:41: error: 'DMARxDscrTab' was not declared in this scope
196 | HAL_ETH_DMARxDescListInit(&EthHandle, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:196:56: error: 'Rx_Buff' was not declared in this scope
196 | HAL_ETH_DMARxDescListInit(&EthHandle, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:196:71: error: 'ETH_RXBUFNB' was not declared in this scope
196 | HAL_ETH_DMARxDescListInit(&EthHandle, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:196:3: error: 'HAL_ETH_DMARxDescListInit' was not declared in this scope
196 | HAL_ETH_DMARxDescListInit(&EthHandle, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:223:39: error: 'PHY_IMR' was not declared in this scope
223 | HAL_ETH_ReadPHYRegister(&EthHandle, PHY_IMR, &regvalue);
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:225:15: error: 'PHY_ISFR_INT4' was not declared in this scope
225 | regvalue |= PHY_ISFR_INT4;
| ^~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'err_t low_level_output(netif*, pbuf*)':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:254:43: error: 'struct ETH_HandleTypeDef' has no member named 'TxDesc'; did you mean 'TxDescList'?
254 | uint8_t *buffer = (uint8_t *)(EthHandle.TxDesc->Buffer1Addr);
| ^~~~~~
| TxDescList
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:263:25: error: 'struct ETH_HandleTypeDef' has no member named 'TxDesc'; did you mean 'TxDescList'?
263 | DmaTxDesc = EthHandle.TxDesc;
| ^~~~~~
| TxDescList
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:269:21: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Status'
269 | if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) {
| ^~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:269:30: error: 'ETH_DMATXDESC_OWN' was not declared in this scope; did you mean 'ETH_DMATXCDESC_OWN'?
269 | if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) {
| ^~~~~~~~~~~~~~~~~
| ETH_DMATXCDESC_OWN
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:279:47: error: 'ETH_TX_BUF_SIZE' was not declared in this scope
279 | while ((byteslefttocopy + bufferoffset) > ETH_TX_BUF_SIZE) {
| ^~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:284:53: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer2NextDescAddr'
284 | DmaTxDesc = (ETH_DMADescTypeDef )(DmaTxDesc->Buffer2NextDescAddr);
| ^~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:287:23: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Status'
287 | if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) {
| ^~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:287:32: error: 'ETH_DMATXDESC_OWN' was not declared in this scope; did you mean 'ETH_DMATXCDESC_OWN'?
287 | if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) {
| ^~~~~~~~~~~~~~~~~
| ETH_DMATXCDESC_OWN
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:292:39: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer1Addr'
292 | buffer = (uint8_t )(DmaTxDesc->Buffer1Addr);
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:307:3: error: 'HAL_ETH_TransmitFrame' was not declared in this scope; did you mean 'HAL_ETH_Transmit_IT'?
307 | HAL_ETH_TransmitFrame(&EthHandle, framelength);
| ^~~~~~~~~~~~~~~~~~~~~
| HAL_ETH_Transmit_IT
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:314:28: error: 'struct ETH_TypeDef' has no member named 'DMASR'; did you mean 'DMAMR'?
314 | if ((EthHandle.Instance->DMASR & ETH_DMASR_TUS) != (uint32_t)RESET) {
| ^~~~~
| DMAMR
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:314:36: error: 'ETH_DMASR_TUS' was not declared in this scope; did you mean 'ETH_DMADSR_TPS'?
314 | if ((EthHandle.Instance->DMASR & ETH_DMASR_TUS) != (uint32_t)RESET) {
| ^~~~~~~~~~~~~
| ETH_DMADSR_TPS
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:316:25: error: 'struct ETH_TypeDef' has no member named 'DMASR'; did you mean 'DMAMR'?
316 | EthHandle.Instance->DMASR = ETH_DMASR_TUS;
| ^~~~~
| DMAMR
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:319:25: error: 'struct ETH_TypeDef' has no member named 'DMATPDR'
319 | EthHandle.Instance->DMATPDR = 0;
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'pbuf low_level_input(netif)':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:346:7: error: 'HAL_ETH_GetReceivedFrame_IT' was not declared in this scope
346 | if (HAL_ETH_GetReceivedFrame_IT(&EthHandle) != HAL_OK) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:351:19: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'
351 | len = EthHandle.RxFrameInfos.length;
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:352:33: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'
352 | buffer = (uint8_t *)EthHandle.RxFrameInfos.buffer;
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:360:27: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'
360 | dmarxdesc = EthHandle.RxFrameInfos.FSRxDesc;
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:368:49: error: 'ETH_RX_BUF_SIZE' was not declared in this scope
368 | while ((byteslefttocopy + bufferoffset) > ETH_RX_BUF_SIZE) {
| ^~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:373:55: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer2NextDescAddr'
373 | dmarxdesc = (ETH_DMADescTypeDef *)(dmarxdesc->Buffer2NextDescAddr);
| ^~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:374:41: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer1Addr'
374 | buffer = (uint8_t )(dmarxdesc->Buffer1Addr);
| ^~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:389:25: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'
389 | dmarxdesc = EthHandle.RxFrameInfos.FSRxDesc;
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:391:29: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'
391 | for (i = 0; i < EthHandle.RxFrameInfos.SegCount; i++) {
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:392:16: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Status'
392 | dmarxdesc->Status |= ETH_DMARXDESC_OWN;
| ^~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:392:26: error: 'ETH_DMARXDESC_OWN' was not declared in this scope; did you mean 'ETH_DMARXCDESC_OWN'?
392 | dmarxdesc->Status |= ETH_DMARXDESC_OWN;
| ^~~~~~~~~~~~~~~~~
| ETH_DMARXCDESC_OWN
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:393:51: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer2NextDescAddr'
393 | dmarxdesc = (ETH_DMADescTypeDef )(dmarxdesc->Buffer2NextDescAddr);
| ^~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:397:13: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'
397 | EthHandle.RxFrameInfos.SegCount = 0;
| ^~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:400:28: error: 'struct ETH_TypeDef' has no member named 'DMASR'; did you mean 'DMAMR'?
400 | if ((EthHandle.Instance->DMASR & ETH_DMASR_RBUS) != (uint32_t)RESET) {
| ^~~~~
| DMAMR
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:400:36: error: 'ETH_DMASR_RBUS' was not declared in this scope; did you mean 'ETH_DMACSR_RBU'?
400 | if ((EthHandle.Instance->DMASR & ETH_DMASR_RBUS) != (uint32_t)RESET) {
| ^~~~~~~~~~~~~~
| ETH_DMACSR_RBU
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:402:25: error: 'struct ETH_TypeDef' has no member named 'DMASR'; did you mean 'DMAMR'?
402 | EthHandle.Instance->DMASR = ETH_DMASR_RBUS;
| ^~~~~
| DMAMR
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:404:25: error: 'struct ETH_TypeDef' has no member named 'DMARPDR'
404 | EthHandle.Instance->DMARPDR = 0;
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'uint8_t ethernetif_is_init()':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:449:21: error: 'struct ETH_HandleTypeDef' has no member named 'State'; did you mean 'gState'?
449 | return (EthHandle.State != HAL_ETH_STATE_RESET);
| ^~~~~
| gState
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void ethernetif_set_link(netif)':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:509:39: error: 'PHY_ISFR' was not declared in this scope
509 | HAL_ETH_ReadPHYRegister(&EthHandle, PHY_ISFR, &regvalue);
| ^~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:512:19: error: 'PHY_ISFR_INT4' was not declared in this scope
512 | if ((regvalue & PHY_ISFR_INT4) != (uint16_t)RESET) {
| ^~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:516:39: error: 'PHY_BSR' was not declared in this scope
516 | HAL_ETH_ReadPHYRegister(&EthHandle, PHY_BSR, &regvalue);
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:518:19: error: 'PHY_LINKED_STATUS' was not declared in this scope
518 | if ((regvalue & PHY_LINKED_STATUS) != (uint16_t)RESET) {
| ^~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void ethernetif_update_config(netif)':
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:542:24: error: 'struct ETH_InitTypeDef' has no member named 'AutoNegotiation'
542 | if (EthHandle.Init.AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE) {
| ^~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:542:43: error: 'ETH_AUTONEGOTIATION_DISABLE' was not declared in this scope
542 | if (EthHandle.Init.AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:545:43: error: 'PHY_SR' was not declared in this scope
545 | HAL_ETH_ReadPHYRegister(&EthHandle, PHY_SR, &regvalue);
| ^~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:551:23: error: 'PHY_DUPLEX_STATUS' was not declared in this scope
551 | if ((regvalue & PHY_DUPLEX_STATUS) != (uint32_t)RESET) {
| ^~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:553:24: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'
553 | EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;
| ^~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:553:37: error: 'ETH_MODE_FULLDUPLEX' was not declared in this scope
553 | EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;
| ^~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:556:24: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'
556 | EthHandle.Init.DuplexMode = ETH_MODE_HALFDUPLEX;
| ^~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:556:37: error: 'ETH_MODE_HALFDUPLEX' was not declared in this scope
556 | EthHandle.Init.DuplexMode = ETH_MODE_HALFDUPLEX;
| ^~~~~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:559:22: error: 'PHY_SPEED_STATUS' was not declared in this scope
559 | if (regvalue & PHY_SPEED_STATUS) {
| ^~~~~~~~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:561:24: error: 'struct ETH_InitTypeDef' has no member named 'Speed'
561 | EthHandle.Init.Speed = ETH_SPEED_10M;
| ^~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:564:24: error: 'struct ETH_InitTypeDef' has no member named 'Speed'
564 | EthHandle.Init.Speed = ETH_SPEED_100M;
| ^~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:573:44: error: 'PHY_BCR' was not declared in this scope
573 | HAL_ETH_WritePHYRegister(&EthHandle, PHY_BCR, ((uint16_t)(EthHandle.Init.DuplexMode >> 3) |
| ^~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:573:80: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'
573 | HAL_ETH_WritePHYRegister(&EthHandle, PHY_BCR, ((uint16_t)(EthHandle.Init.DuplexMode >> 3) |
| ^~~~~~~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:574:80: error: 'struct ETH_InitTypeDef' has no member named 'Speed'
574 | (uint16_t)(EthHandle.Init.Speed >> 1)));
| ^~~~~
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:578:36: error: 'ETH_MACInitTypeDef' was not declared in this scope; did you mean 'ETH_InitTypeDef'?
578 | HAL_ETH_ConfigMAC(&EthHandle, (ETH_MACInitTypeDef *) NULL);
| ^~~~~~~~~~~~~~~~~~
| ETH_InitTypeDef
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:578:56: error: expected primary-expression before ')' token
578 | HAL_ETH_ConfigMAC(&EthHandle, (ETH_MACInitTypeDef *) NULL);
| ^
C:\Users\jm_de\Documents\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:578:5: error: 'HAL_ETH_ConfigMAC' was not declared in this scope
578 | HAL_ETH_ConfigMAC(&EthHandle, (ETH_MACInitTypeDef *) NULL);
| ^~~~~~~~~~~~~~~~~
exit status 1
Error compiling for board Nucleo-144.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
`

[fpistm]

Hi @fauresystems
Currently the Ethernet is not supported on H7.
This is already tracked here:
stm32duino/STM32Ethernet#21