diff --git a/README.md b/README.md
index b1b14d3f20..2d8a481684 100644
--- a/README.md
+++ b/README.md
@@ -407,6 +407,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| Status | Device(s) | Name | Release | Notes |
| :----: | :-------: | ---- | :-----: | :---- |
| :green_heart: | STM32L412K8
STM32L412KB
STM32L422KB | Generic Board | *2.0.0* | |
+| :yellow_heart: | STM32L431RB
STM32L431RC | Generic Board | **2.3.0** | |
| :green_heart: | STM32L432KB
STM32L432KC
STM32L442KC | Generic Board | *2.0.0* | |
| :green_heart: | STM32L433CBT
STM32L433CCT | Generic Board | *2.1.0* | |
| :green_heart: | STM32L433CBU
STM32L433CCU | Generic Board | *2.1.0* | |
diff --git a/boards.txt b/boards.txt
index f9387d5aef..ada4ff24b4 100644
--- a/boards.txt
+++ b/boards.txt
@@ -4954,6 +4954,54 @@ GenL4.menu.pnum.GENERIC_L422KBUX.build.board=GENERIC_L422KBUX
GenL4.menu.pnum.GENERIC_L422KBUX.build.product_line=STM32L422xx
GenL4.menu.pnum.GENERIC_L422KBUX.build.variant=STM32L4xx/L412K(8-B)(T-U)_L422KB(T-U)
+# Generic L431RBIx
+GenL4.menu.pnum.GENERIC_L431RBIX=Generic L431RBIx
+GenL4.menu.pnum.GENERIC_L431RBIX.upload.maximum_size=131072
+GenL4.menu.pnum.GENERIC_L431RBIX.upload.maximum_data_size=65536
+GenL4.menu.pnum.GENERIC_L431RBIX.build.board=GENERIC_L431RBIX
+GenL4.menu.pnum.GENERIC_L431RBIX.build.product_line=STM32L431xx
+GenL4.menu.pnum.GENERIC_L431RBIX.build.variant=STM32L4xx/L431R(B-C)(I-T-Y)
+
+# Generic L431RCIx
+GenL4.menu.pnum.GENERIC_L431RCIX=Generic L431RCIx
+GenL4.menu.pnum.GENERIC_L431RCIX.upload.maximum_size=262144
+GenL4.menu.pnum.GENERIC_L431RCIX.upload.maximum_data_size=65536
+GenL4.menu.pnum.GENERIC_L431RCIX.build.board=GENERIC_L431RCIX
+GenL4.menu.pnum.GENERIC_L431RCIX.build.product_line=STM32L431xx
+GenL4.menu.pnum.GENERIC_L431RCIX.build.variant=STM32L4xx/L431R(B-C)(I-T-Y)
+
+# Generic L431RBTx
+GenL4.menu.pnum.GENERIC_L431RBTX=Generic L431RBTx
+GenL4.menu.pnum.GENERIC_L431RBTX.upload.maximum_size=131072
+GenL4.menu.pnum.GENERIC_L431RBTX.upload.maximum_data_size=65536
+GenL4.menu.pnum.GENERIC_L431RBTX.build.board=GENERIC_L431RBTX
+GenL4.menu.pnum.GENERIC_L431RBTX.build.product_line=STM32L431xx
+GenL4.menu.pnum.GENERIC_L431RBTX.build.variant=STM32L4xx/L431R(B-C)(I-T-Y)
+
+# Generic L431RCTx
+GenL4.menu.pnum.GENERIC_L431RCTX=Generic L431RCTx
+GenL4.menu.pnum.GENERIC_L431RCTX.upload.maximum_size=262144
+GenL4.menu.pnum.GENERIC_L431RCTX.upload.maximum_data_size=65536
+GenL4.menu.pnum.GENERIC_L431RCTX.build.board=GENERIC_L431RCTX
+GenL4.menu.pnum.GENERIC_L431RCTX.build.product_line=STM32L431xx
+GenL4.menu.pnum.GENERIC_L431RCTX.build.variant=STM32L4xx/L431R(B-C)(I-T-Y)
+
+# Generic L431RBYx
+GenL4.menu.pnum.GENERIC_L431RBYX=Generic L431RBYx
+GenL4.menu.pnum.GENERIC_L431RBYX.upload.maximum_size=131072
+GenL4.menu.pnum.GENERIC_L431RBYX.upload.maximum_data_size=65536
+GenL4.menu.pnum.GENERIC_L431RBYX.build.board=GENERIC_L431RBYX
+GenL4.menu.pnum.GENERIC_L431RBYX.build.product_line=STM32L431xx
+GenL4.menu.pnum.GENERIC_L431RBYX.build.variant=STM32L4xx/L431R(B-C)(I-T-Y)
+
+# Generic L431RCYx
+GenL4.menu.pnum.GENERIC_L431RCYX=Generic L431RCYx
+GenL4.menu.pnum.GENERIC_L431RCYX.upload.maximum_size=262144
+GenL4.menu.pnum.GENERIC_L431RCYX.upload.maximum_data_size=65536
+GenL4.menu.pnum.GENERIC_L431RCYX.build.board=GENERIC_L431RCYX
+GenL4.menu.pnum.GENERIC_L431RCYX.build.product_line=STM32L431xx
+GenL4.menu.pnum.GENERIC_L431RCYX.build.variant=STM32L4xx/L431R(B-C)(I-T-Y)
+
# Generic L432KBUx
GenL4.menu.pnum.GENERIC_L432KBUX=Generic L432KBUx
GenL4.menu.pnum.GENERIC_L432KBUX.upload.maximum_size=131072
diff --git a/variants/STM32L4xx/L431R(B-C)(I-T-Y)/generic_clock.c b/variants/STM32L4xx/L431R(B-C)(I-T-Y)/generic_clock.c
index e1169180c1..eb83e32579 100644
--- a/variants/STM32L4xx/L431R(B-C)(I-T-Y)/generic_clock.c
+++ b/variants/STM32L4xx/L431R(B-C)(I-T-Y)/generic_clock.c
@@ -22,8 +22,45 @@
*/
WEAK void SystemClock_Config(void)
{
- /* SystemClock_Config can be generated by STM32CubeMX */
-#warning "SystemClock_Config() is empty. Default clock at reset is used."
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+
+ /** Configure the main internal regulator output voltage
+ */
+ if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) {
+ Error_Handler();
+ }
+
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.MSICalibrationValue = 0;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
+ RCC_OscInitStruct.PLL.PLLM = 1;
+ RCC_OscInitStruct.PLL.PLLN = 40;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
+ RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+ | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
+ Error_Handler();
+ }
}
#endif /* ARDUINO_GENERIC_* */
diff --git a/variants/STM32L4xx/L431R(B-C)(I-T-Y)/ldscript.ld b/variants/STM32L4xx/L431R(B-C)(I-T-Y)/ldscript.ld
new file mode 100644
index 0000000000..bba657794a
--- /dev/null
+++ b/variants/STM32L4xx/L431R(B-C)(I-T-Y)/ldscript.ld
@@ -0,0 +1,185 @@
+/*
+******************************************************************************
+**
+** @file : LinkerScript.ld
+**
+** @author : Auto-generated by STM32CubeIDE
+**
+** @brief : Linker script for STM32L431RCTx Device from STM32L4 series
+** 256Kbytes FLASH
+** 64Kbytes RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used
+**
+** Target : STMicroelectronics STM32
+**
+** Distribution: The file is distributed as is, without any warranty
+** of any kind.
+**
+******************************************************************************
+** @attention
+**
+** Copyright (c) 2022 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200 ; /* required amount of heap */
+_Min_Stack_Size = 0x400 ; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
+ FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
+}
+
+/* Sections */
+SECTIONS
+{
+ /* The startup code into "FLASH" Rom type memory */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data into "FLASH" Rom type memory */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data into "FLASH" Rom type memory */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : {
+ . = ALIGN(4);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM : {
+ . = ALIGN(4);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(4);
+ } >FLASH
+
+ .preinit_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .init_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .fini_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ /* Used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections into "RAM" Ram type memory */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+ *(.RamFunc) /* .RamFunc sections */
+ *(.RamFunc*) /* .RamFunc* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section into "RAM" Ram type memory */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss section */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+ /* Remove information from the compiler libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}