diff --git a/README.md b/README.md
index 8bc8282cec..dd31683d3e 100644
--- a/README.md
+++ b/README.md
@@ -386,15 +386,20 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| :green_heart: | STM32L4A6ZG-P | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4R5VG
STM32L4R5VI | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4R5ZGTx
STM32L4R5ZITx | Generic Board | *2.0.0* | |
+| :yellow_heart: | STM32L4R5ZGYx
STM32L4R5ZIYx | Generic Board | **2.1.0** | |
| :green_heart: | STM32L4R5ZI-P | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4R7VITx | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4R7ZITx | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4R9ZGJx
STM32L4R9ZIJx | Generic Board | *2.0.0* | |
+| :yellow_heart: | STM32L4R9ZGYx
STM32L4R9ZIYx | Generic Board | **2.1.0** | |
| :green_heart: | STM32L4S5VI | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4S5ZITx | Generic Board | *2.0.0* | |
+| :yellow_heart: | STM32L4S5ZIYx | Generic Board | **2.1.0** | |
| :green_heart: | STM32L4S7VI | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4S7ZITx | Generic Board | *2.0.0* | |
| :green_heart: | STM32L4S9ZIJx | Generic Board | *2.0.0* | |
+| :yellow_heart: | STM32L4S9ZIYx | Generic Board | **2.1.0** | |
+| :yellow_heart: | STM32L4R5ZIYx | Swan R5 | **2.1.0** | [Blues Wireless](https://blues.io/) |
### Generic STM32L5 boards
diff --git a/boards.txt b/boards.txt
index cb1870026e..7b7d6673bb 100644
--- a/boards.txt
+++ b/boards.txt
@@ -4434,6 +4434,16 @@ GenL4.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
GenL4.build.series=STM32L4xx
GenL4.build.cmsis_lib_gcc=arm_cortexM4lf_math
+# Swan R5
+GenL4.menu.pnum.SWAN_R5=Swan R5
+GenL4.menu.pnum.SWAN_R5.upload.maximum_size=2097152
+GenL4.menu.pnum.SWAN_R5.upload.maximum_data_size=655360
+GenL4.menu.pnum.SWAN_R5.build.board=SWAN_R5
+GenL4.menu.pnum.SWAN_R5.build.product_line=STM32L4R5xx
+GenL4.menu.pnum.SWAN_R5.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+GenL4.menu.pnum.SWAN_R5.build.variant_h=variant_{build.board}.h
+GenL4.menu.pnum.SWAN_R5.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
+
# Generic L412K8Tx
GenL4.menu.pnum.GENERIC_L412K8TX=Generic L412K8Tx
GenL4.menu.pnum.GENERIC_L412K8TX.upload.maximum_size=65536
@@ -4770,6 +4780,14 @@ GenL4.menu.pnum.GENERIC_L4R5ZGTX.build.board=GENERIC_L4R5ZGTX
GenL4.menu.pnum.GENERIC_L4R5ZGTX.build.product_line=STM32L4R5xx
GenL4.menu.pnum.GENERIC_L4R5ZGTX.build.variant=STM32L4xx/L4R5Z(G-I)T_L4R7ZIT_L4S5ZIT_L4S7ZIT
+# Generic L4R5ZGYx
+GenL4.menu.pnum.GENERIC_L4R5ZGYX=Generic L4R5ZGYx
+GenL4.menu.pnum.GENERIC_L4R5ZGYX.upload.maximum_size=1048576
+GenL4.menu.pnum.GENERIC_L4R5ZGYX.upload.maximum_data_size=655360
+GenL4.menu.pnum.GENERIC_L4R5ZGYX.build.board=GENERIC_L4R5ZGYX
+GenL4.menu.pnum.GENERIC_L4R5ZGYX.build.product_line=STM32L4R5xx
+GenL4.menu.pnum.GENERIC_L4R5ZGYX.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+
# Generic L4R5ZITx
GenL4.menu.pnum.GENERIC_L4R5ZITX=Generic L4R5ZITx
GenL4.menu.pnum.GENERIC_L4R5ZITX.upload.maximum_size=2097152
@@ -4778,6 +4796,14 @@ GenL4.menu.pnum.GENERIC_L4R5ZITX.build.board=GENERIC_L4R5ZITX
GenL4.menu.pnum.GENERIC_L4R5ZITX.build.product_line=STM32L4R5xx
GenL4.menu.pnum.GENERIC_L4R5ZITX.build.variant=STM32L4xx/L4R5Z(G-I)T_L4R7ZIT_L4S5ZIT_L4S7ZIT
+# Generic L4R5ZIYx
+GenL4.menu.pnum.GENERIC_L4R5ZIYX=Generic L4R5ZIYx
+GenL4.menu.pnum.GENERIC_L4R5ZIYX.upload.maximum_size=2097152
+GenL4.menu.pnum.GENERIC_L4R5ZIYX.upload.maximum_data_size=655360
+GenL4.menu.pnum.GENERIC_L4R5ZIYX.build.board=GENERIC_L4R5ZIYX
+GenL4.menu.pnum.GENERIC_L4R5ZIYX.build.product_line=STM32L4R5xx
+GenL4.menu.pnum.GENERIC_L4R5ZIYX.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+
# Generic L4R5ZITxP
GenL4.menu.pnum.GENERIC_L4R5ZITXP=Generic L4R5ZITxP
GenL4.menu.pnum.GENERIC_L4R5ZITXP.upload.maximum_size=2097152
@@ -4810,6 +4836,14 @@ GenL4.menu.pnum.GENERIC_L4R9ZGJX.build.board=GENERIC_L4R9ZGJX
GenL4.menu.pnum.GENERIC_L4R9ZGJX.build.product_line=STM32L4R9xx
GenL4.menu.pnum.GENERIC_L4R9ZGJX.build.variant=STM32L4xx/L4R9Z(G-I)J_L4S9ZIJ
+# Generic L4R9ZGYx
+GenL4.menu.pnum.GENERIC_L4R9ZGYX=Generic L4R9ZGYx
+GenL4.menu.pnum.GENERIC_L4R9ZGYX.upload.maximum_size=1048576
+GenL4.menu.pnum.GENERIC_L4R9ZGYX.upload.maximum_data_size=655360
+GenL4.menu.pnum.GENERIC_L4R9ZGYX.build.board=GENERIC_L4R9ZGYX
+GenL4.menu.pnum.GENERIC_L4R9ZGYX.build.product_line=STM32L4R9xx
+GenL4.menu.pnum.GENERIC_L4R9ZGYX.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+
# Generic L4R9ZIJx
GenL4.menu.pnum.GENERIC_L4R9ZIJX=Generic L4R9ZIJx
GenL4.menu.pnum.GENERIC_L4R9ZIJX.upload.maximum_size=2097152
@@ -4818,6 +4852,14 @@ GenL4.menu.pnum.GENERIC_L4R9ZIJX.build.board=GENERIC_L4R9ZIJX
GenL4.menu.pnum.GENERIC_L4R9ZIJX.build.product_line=STM32L4R9xx
GenL4.menu.pnum.GENERIC_L4R9ZIJX.build.variant=STM32L4xx/L4R9Z(G-I)J_L4S9ZIJ
+# Generic L4R9ZIYx
+GenL4.menu.pnum.GENERIC_L4R9ZIYX=Generic L4R9ZIYx
+GenL4.menu.pnum.GENERIC_L4R9ZIYX.upload.maximum_size=2097152
+GenL4.menu.pnum.GENERIC_L4R9ZIYX.upload.maximum_data_size=655360
+GenL4.menu.pnum.GENERIC_L4R9ZIYX.build.board=GENERIC_L4R9ZIYX
+GenL4.menu.pnum.GENERIC_L4R9ZIYX.build.product_line=STM32L4R9xx
+GenL4.menu.pnum.GENERIC_L4R9ZIYX.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+
# Generic L4S5VITx
GenL4.menu.pnum.GENERIC_L4S5VITX=Generic L4S5VITx
GenL4.menu.pnum.GENERIC_L4S5VITX.upload.maximum_size=2097152
@@ -4834,6 +4876,14 @@ GenL4.menu.pnum.GENERIC_L4S5ZITX.build.board=GENERIC_L4S5ZITX
GenL4.menu.pnum.GENERIC_L4S5ZITX.build.product_line=STM32L4S5xx
GenL4.menu.pnum.GENERIC_L4S5ZITX.build.variant=STM32L4xx/L4R5Z(G-I)T_L4R7ZIT_L4S5ZIT_L4S7ZIT
+# Generic L4S5ZIYx
+GenL4.menu.pnum.GENERIC_L4S5ZIYX=Generic L4S5ZIYx
+GenL4.menu.pnum.GENERIC_L4S5ZIYX.upload.maximum_size=2097152
+GenL4.menu.pnum.GENERIC_L4S5ZIYX.upload.maximum_data_size=655360
+GenL4.menu.pnum.GENERIC_L4S5ZIYX.build.board=GENERIC_L4S5ZIYX
+GenL4.menu.pnum.GENERIC_L4S5ZIYX.build.product_line=STM32L4S5xx
+GenL4.menu.pnum.GENERIC_L4S5ZIYX.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+
# Generic L4S7VITx
GenL4.menu.pnum.GENERIC_L4S7VITX=Generic L4S7VITx
GenL4.menu.pnum.GENERIC_L4S7VITX.upload.maximum_size=2097152
@@ -4858,6 +4908,14 @@ GenL4.menu.pnum.GENERIC_L4S9ZIJX.build.board=GENERIC_L4S9ZIJX
GenL4.menu.pnum.GENERIC_L4S9ZIJX.build.product_line=STM32L4S9xx
GenL4.menu.pnum.GENERIC_L4S9ZIJX.build.variant=STM32L4xx/L4R9Z(G-I)J_L4S9ZIJ
+# Generic L4S9ZIYx
+GenL4.menu.pnum.GENERIC_L4S9ZIYX=Generic L4S9ZIYx
+GenL4.menu.pnum.GENERIC_L4S9ZIYX.upload.maximum_size=2097152
+GenL4.menu.pnum.GENERIC_L4S9ZIYX.upload.maximum_data_size=655360
+GenL4.menu.pnum.GENERIC_L4S9ZIYX.build.board=GENERIC_L4S9ZIYX
+GenL4.menu.pnum.GENERIC_L4S9ZIYX.build.product_line=STM32L4S9xx
+GenL4.menu.pnum.GENERIC_L4S9ZIYX.build.variant=STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY
+
# Upload menu
GenL4.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD)
GenL4.menu.upload_method.swdMethod.upload.protocol=0
diff --git a/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/PeripheralPins_SWAN_R5.c b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/PeripheralPins_SWAN_R5.c
new file mode 100644
index 0000000000..1b1305ce21
--- /dev/null
+++ b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/PeripheralPins_SWAN_R5.c
@@ -0,0 +1,479 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020-2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+/*
+ * Automatically generated from STM32L4R5Z(G-I)Yx.xml, STM32L4R9Z(G-I)Yx.xml
+ * STM32L4S5ZIYx.xml, STM32L4S9ZIYx.xml
+ * CubeMX DB release 6.0.21
+ */
+#if defined(ARDUINO_SWAN_R5)
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Notes:
+ * - The pins mentioned Px_y_ALTz are alternative possibilities which use other
+ * HW peripheral instances. You can use them the same way as any other "normal"
+ * pin (i.e. analogWrite(PA7_ALT1, 128);).
+ *
+ * - Commented lines are alternative possibilities which are not used per default.
+ * If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+ {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 - BAT VOLTAGE
+ {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
+ {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
+ {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+ {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+ {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
+ {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
+ {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
+ {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
+ {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
+ {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
+ {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
+ {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
+ {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
+ {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
+ {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
+ {NC, NP, 0}
+};
+#endif
+
+//*** DAC ***
+
+#ifdef HAL_DAC_MODULE_ENABLED
+WEAK const PinMap PinMap_DAC[] = {
+ {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
+ {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
+ {NC, NP, 0}
+};
+#endif
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+ {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_7_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C4)},
+ {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PB_11_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C4)},
+ {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PC_1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)},
+ // {PD_13, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // NC
+ {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_15, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {PG_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ // {PG_13, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SCL[] = {
+ {PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_6_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C4)},
+ // {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // NC
+ {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PB_10_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C4)},
+ {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PC_0, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ // {PD_12, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // NC
+ {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ // {PF_14, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // NC
+ {PG_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** TIM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+WEAK const PinMap PinMap_TIM[] = {
+ // {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - BAT VOLTAGE
+ // {PA_0_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - BAT VOLTAGE
+ {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+ {PA_1_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ {PA_1_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
+ {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ {PA_2_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+ {PA_2_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1
+ {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ {PA_3_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+ {PA_3_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2
+ {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_5_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
+ {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
+ {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PA_7_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
+ {PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
+ // {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - NC
+ {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - USB DM
+ // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - JTDI
+ {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PB_0_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
+ {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PB_1_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - JTDO
+ {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - NC
+ {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+ {PB_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
+ {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ {PB_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
+ // {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - NC
+ // {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1 - NC
+ {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ {PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
+ {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PB_13_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
+ {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_14_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
+ {PB_14_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1
+ {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_15_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ {PB_15_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2
+ // {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - USB_DETECT
+ // {PC_6_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - USB_DETECT
+ // {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - NC
+ // {PC_7_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - NC
+ // {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - NC
+ // {PC_8_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 - NC
+ {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PC_9_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
+ // {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - NC
+ // {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - NC
+ // {PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - NC
+ {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ // {PE_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1 - NC
+ {PE_1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
+ {PE_3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ // {PE_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - Power Switch EN
+ // {PE_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - NC
+ // {PE_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - DISCHARGE
+ // {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - NC
+ {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ // {PF_6, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - NC
+ // {PF_7, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 - NC
+ // {PF_10, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)}, // TIM15_CH2 - NC
+ // {PG_9, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N - NC
+ // {PG_10, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)}, // TIM15_CH1 - NC
+ {NC, NP, 0}
+};
+#endif
+
+//*** UART ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+ // {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // BAT VOLTAGE
+ {PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PA_2_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PC_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // NC
+ // {PC_10_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // NC
+ // {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // NC
+ {PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PG_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ // {PG_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RX[] = {
+ // {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // UART4 NA
+ {PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PA_3_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ // {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)}, // JTDI
+ {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // UART4 NA
+ {PC_11_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // UART5 NA
+ {PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PG_8, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ // {PG_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RTS[] = {
+ {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB DP
+ // {PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // JTDI
+ // {PA_15_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // JTDI
+ {PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PB_1_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // JTDO
+ // {PB_4, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // UART5 NA
+ // {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // NC
+ {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // NC
+ // {PG_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // NC
+ {PG_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_CTS[] = {
+ // {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // BAT VOLTAGE
+ {PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PA_6_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB DM
+ {PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ // {PB_5, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // NC
+ // {PB_7, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // UART4 NA
+ {PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
+ {PB_13_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // NC
+ // {PG_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // USB DP
+ // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // NC
+ // {PB_5_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // NC
+ {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
+ {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // NC
+ {PD_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)}, // SPI3 NA
+ {PE_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PG_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // USB DM
+ {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PB_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // SPI3 NA
+ {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // SPI3 NA
+ {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PE_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PG_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Version bit 3
+ // {PG_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+ {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
+ // {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // JTDO
+ // {PB_3_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // JTDO
+ {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // NC
+ {PD_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
+ {PE_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PG_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Version bit 2
+ // {PG_9, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // SPI3 NA
+ // {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // JTDI
+ // {PA_15_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // JTDI
+ {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // NC
+ {PD_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PE_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PG_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // NC
+ // {PG_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // SPI3 NA
+ {NC, NP, 0}
+};
+#endif
+
+//*** CAN ***
+
+#ifdef HAL_CAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_RD[] = {
+ // {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // USB DM
+ // {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // NC
+ {PD_0, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_CAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_TD[] = {
+ // {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // USB DP
+ {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
+ {PD_1, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** No ETHERNET ***
+
+//*** OCTOSPI ***
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_OCTOSPI_DATA0[] = {
+ // {PB_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
+ {PE_12, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0
+ // {PF_0, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P2)}, // OCTOSPIM_P2_IO0 - OCTOSPI2 NA
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_OCTOSPI_DATA1[] = {
+ {PB_0, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
+ // {PE_13, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1
+ // {PF_1, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P2)}, // OCTOSPIM_P2_IO1 - OCTOSPI2 NA
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_OCTOSPI_DATA2[] = {
+ // {PA_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
+ {PE_14, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2
+ // {PF_2, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P2)}, // OCTOSPIM_P2_IO2 - NC
+ // {PF_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2 - NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_OCTOSPI_DATA3[] = {
+ // {PA_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
+ {PE_15, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3
+ // {PF_3, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P2)}, // OCTOSPIM_P2_IO3 - NC
+ // {PF_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3 - NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_OCTOSPI_SCLK[] = {
+ // {PA_3, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
+ // {PB_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
+ {PE_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK
+ // {PF_4, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P2)}, // OCTOSPIM_P2_CLK - NC
+ // {PF_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK - NC
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_OCTOSPI_SSEL[] = {
+ // {PA_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
+ // {PA_4, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
+ // {PB_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
+ {PC_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
+ // {PD_3, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P2)}, // OCTOSPIM_P2_NCS - OCTOSPI2 NA
+ // {PE_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS
+ // {PG_12, OCTOSPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_OCTOSPIM_P2)}, // OCTOSPIM_P2_NCS - OCTOSPI2 NA
+ {NC, NP, 0}
+};
+#endif
+
+//*** USB ***
+
+#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
+WEAK const PinMap PinMap_USB_OTG_FS[] = {
+ // {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF - NC
+ // {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
+ // {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
+ {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
+ {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
+ // {PA_13, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_NOE - SWDIO
+ // {PA_14, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF - SWCLK
+ // {PC_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_NOE
+ {NC, NP, 0}
+};
+#endif
+
+//*** SD ***
+
+#ifdef HAL_SD_MODULE_ENABLED
+WEAK const PinMap PinMap_SD[] = {
+ // {PB_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_CKIN - NC
+ // {PB_8_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D4 - NC
+ // {PB_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_CDIR
+ // {PB_9_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D5
+ // {PC_6, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_D0DIR - USB_DETECT
+ // {PC_6_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D6 - USB_DETECT
+ // {PC_7, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_D123DIR - NC
+ // {PC_7_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D7 - NC
+ // {PC_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D0 - NC
+ // {PC_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D1
+ // {PC_10, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D2 - NC
+ // {PC_11, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D3
+ // {PC_12, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CK - NC
+ // {PD_2, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CMD
+ {NC, NP, 0}
+};
+#endif
+
+#endif /* ARDUINO_SWAN_R5 */
diff --git a/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/generic_clock.c b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/generic_clock.c
index 075aede863..3e11c15892 100644
--- a/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/generic_clock.c
+++ b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/generic_clock.c
@@ -22,8 +22,54 @@
*/
WEAK void SystemClock_Config(void)
{
- /* SystemClock_Config can be generated by STM32CubeMX */
-#warning "SystemClock_Config() is empty. Default clock at reset is used."
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
+
+ /** Configure the main internal regulator output voltage
+ */
+ if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.MSICalibrationValue = 0;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
+ RCC_OscInitStruct.PLL.PLLM = 1;
+ RCC_OscInitStruct.PLL.PLLN = 60;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV5;
+ RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+ | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
+ Error_Handler();
+ }
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_SDMMC1
+ | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_OSPI;
+ PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK;
+ PeriphClkInit.OspiClockSelection = RCC_OSPICLKSOURCE_SYSCLK;
+ PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+ PeriphClkInit.Sdmmc1ClockSelection = RCC_SDMMC1CLKSOURCE_PLLP;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+ Error_Handler();
+ }
}
#endif /* ARDUINO_GENERIC_* */
diff --git a/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/ldscript.ld b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/ldscript.ld
new file mode 100644
index 0000000000..c2cc5c41a3
--- /dev/null
+++ b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/ldscript.ld
@@ -0,0 +1,177 @@
+/**
+ ******************************************************************************
+ * @file LinkerScript.ld
+ * @author Auto-generated by STM32CubeIDE
+ * @brief Linker script for STM32L4R5ZIYx Device from STM32L4PLUS series
+ * 2048Kbytes FLASH
+ * 640Kbytes RAM
+ *
+ * Set heap size, stack size and stack location according
+ * to application requirements.
+ *
+ * Set memory bank area and size if external memory is used
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
+ FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
+}
+
+/* Sections */
+SECTIONS
+{
+ /* The startup code into "FLASH" Rom type memory */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data into "FLASH" Rom type memory */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data into "FLASH" Rom type memory */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : {
+ . = ALIGN(4);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM : {
+ . = ALIGN(4);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(4);
+ } >FLASH
+
+ .preinit_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .init_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .fini_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ /* Used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections into "RAM" Ram type memory */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+ *(.RamFunc) /* .RamFunc sections */
+ *(.RamFunc*) /* .RamFunc* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section into "RAM" Ram type memory */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss section */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+ /* Remove information from the compiler libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/variant_SWAN_R5.cpp b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/variant_SWAN_R5.cpp
new file mode 100644
index 0000000000..ceab2fed09
--- /dev/null
+++ b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/variant_SWAN_R5.cpp
@@ -0,0 +1,188 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#if defined(ARDUINO_SWAN_R5)
+#include "pins_arduino.h"
+
+// Digital PinName array
+const PinName digitalPin[] = {
+ PD_9,
+ PD_8,
+ PF_15,
+ PE_13,
+ PE_3,
+ PE_11,
+ PE_9,
+ PF_13,
+ PF_12,
+ PD_15,
+ PA_4,
+ PA_7,
+ PA_6,
+ PA_5,
+ PB_9,
+ PE_1,
+ PA_3,
+ PA_1,
+ PC_3,
+ PC_1,
+ PC_4,
+ PC_5,
+ PB_1,
+ PC_2,
+ PA_0,
+ PA_10,
+ PA_9,
+ PG_12,
+ PB_4,
+ PD_6,
+ PA_2,
+ PD_4,
+ PD_3,
+ PB_10,
+ PB_11,
+ PD_2,
+ PB_13,
+ PG_8,
+ PG_7,
+ PB_7,
+ PB_6,
+ PF_0,
+ PF_1,
+ PC_9,
+ PC_0,
+ PD_0,
+ PB_15,
+ PB_14,
+ PD_1,
+ PD_5,
+ PE_10,
+ PC_11,
+ PE_12,
+ PB_0,
+ PE_14,
+ PE_15,
+ PE_2,
+ PC_13,
+ PE_4,
+ PA_11,
+ PA_12,
+ PC_6,
+ PE_6,
+ PG_0,
+ PG_1,
+ PG_2,
+ PG_3,
+ PB_2,
+ PH_3,
+ PB_3,
+ PA_15,
+ PA_14,
+ PA_13,
+ PC_14,
+ PC_15
+};
+
+// Analog (Ax) pin number array
+const uint32_t analogInputPin[] = {
+ 16, // A0, PA3
+ 17, // A1, PA1
+ 18, // A2, PC3
+ 19, // A3, PC1
+ 20, // A4, PC4
+ 21, // A5, PC5
+ 22, // A6, PB1
+ 23, // A7, PC2
+ 24, // A8, PA0
+ 10, // A9, PA4
+ 11, // A10, PA7
+ 12, // A11, PA6
+ 13, // A12, PA5
+ 30, // A13, PA2
+ 44, // A14, PC0
+ 53 // A15, PB0
+};
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief System Clock Configuration
+ * @param None
+ * @retval None
+ */
+WEAK void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
+
+ /** Configure the main internal regulator output voltage
+ */
+ if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Configure LSE Drive Capability
+ */
+ HAL_PWR_EnableBkUpAccess();
+ __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.MSICalibrationValue = 0;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
+ RCC_OscInitStruct.PLL.PLLM = 6;
+ RCC_OscInitStruct.PLL.PLLN = 30;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV5;
+ RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+ | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
+ Error_Handler();
+ }
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_SDMMC1
+ | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_OSPI;
+ PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK;
+ PeriphClkInit.OspiClockSelection = RCC_OSPICLKSOURCE_SYSCLK;
+ PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_MSI;
+ PeriphClkInit.Sdmmc1ClockSelection = RCC_SDMMC1CLKSOURCE_MSI;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Enable MSI Auto calibration
+ */
+ HAL_RCCEx_EnableMSIPLLMode();
+}
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* ARDUINO_SWAN_R5* */
diff --git a/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/variant_SWAN_R5.h b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/variant_SWAN_R5.h
new file mode 100644
index 0000000000..2597b6293a
--- /dev/null
+++ b/variants/STM32L4xx/L4R5Z(G-I)Y_L4R9Z(G-I)Y_L4S5ZIY_L4S9ZIY/variant_SWAN_R5.h
@@ -0,0 +1,258 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#pragma once
+
+/*----------------------------------------------------------------------------
+ * STM32 pins number
+ *----------------------------------------------------------------------------*/
+#define PD9 0
+#define PD8 1
+#define PF15 2
+#define PE13 3
+#define PE3 4
+#define PE11 5
+#define PE9 6
+#define PF13 7
+#define PF12 8
+#define PD15 9
+#define PA4 PIN_A9
+#define PA7 PIN_A10
+#define PA6 PIN_A11
+#define PA5 PIN_A12
+#define PB9 14
+#define PE1 15
+#define PA3 PIN_A0
+#define PA1 PIN_A1
+#define PC3 PIN_A2
+#define PC1 PIN_A3
+#define PC4 PIN_A4
+#define PC5 PIN_A5
+#define PB1 PIN_A6
+#define PC2 PIN_A7
+#define PA0 PIN_A8 // BAT VOLTAGE
+#define PA10 25 // RX
+#define PA9 26 // TX
+#define PG12 27 // RTS
+#define PB4 28 // CTS
+#define PD6 29 // RX2
+#define PA2 PIN_A13 // TX2
+#define PD4 31 // RTS2
+#define PD3 32 // CTS2
+#define PB10 33 // TX3
+#define PB11 34 // RX3
+#define PD2 35 // RTS3
+#define PB13 36 // CTS3
+#define PG8 37 // RX0
+#define PG7 38 // TX0
+#define PB7 39 // SDA
+#define PB6 40 // SCL
+#define PF0 41 // SDA2
+#define PF1 42 // SCL2
+#define PC9 43 // SDA3
+#define PC0 PIN_A14 // SCL3
+#define PD0 45 // CS
+#define PB15 46 // MO
+#define PB14 47 // MI
+#define PD1 48 // SCK
+#define PD5 49 // QEN
+#define PE10 50 // QCLK
+#define PC11 51 // QCS
+#define PE12 52 // QIO0
+#define PB0 PIN_A15 // QIO1
+#define PE14 54 // QIO2
+#define PE15 55 // QIO3
+#define PE2 56 // User LED
+#define PC13 57 // User button - active-low
+#define PE4 58 // Power Switch EN
+#define PA11 59 // USB DM
+#define PA12 60 // USB DP
+#define PC6 61 // USB_DETECT
+#define PE6 62 // DISCHARGE
+#define PG0 63 // Version bit 0
+#define PG1 64 // Version bit 1
+#define PG2 65 // Version bit 2
+#define PG3 66 // Version bit 3
+#define PB2 67 // BOOT1 - Do not connect to VDD
+#define PH3 68 // BOOT0 button
+#define PB3 69 // JTDO
+#define PA15 70 // JTDI
+#define PA14 71 // SWCLK
+#define PA13 72 // SWDIO
+#define PC14 73 // OSC32 IN
+#define PC15 74 // OSC32 OUT
+
+// pins not connected
+// #define PA8
+// #define PB5
+// #define PB8
+// #define PB12
+// #define PC7
+// #define PC8
+// #define PC10
+// #define PC12
+// #define PD7
+// #define PD10
+// #define PD11
+// #define PD12
+// #define PD13
+// #define PD14
+// #define PE0
+// #define PE5
+// #define PE7
+// #define PE8
+// #define PF2
+// #define PF3
+// #define PF4
+// #define PF5
+// #define PF6
+// #define PF7
+// #define PF10
+// #define PF11
+// #define PF14
+// #define PG4
+// #define PG5
+// #define PG6
+// #define PG9
+// #define PG10
+// #define PG13
+// #define PH0
+// #define PH1
+
+// Alternate pins number
+// #define PA0_ALT1 (PA0 | ALT1) // BAT VOLTAGE
+#define PA1_ALT1 (PA1 | ALT1)
+#define PA1_ALT2 (PA1 | ALT2)
+#define PA2_ALT1 (PA2 | ALT1)
+#define PA2_ALT2 (PA2 | ALT2)
+#define PA3_ALT1 (PA3 | ALT1)
+#define PA3_ALT2 (PA3 | ALT2)
+#define PA4_ALT1 (PA4 | ALT1)
+#define PA5_ALT1 (PA5 | ALT1)
+#define PA6_ALT1 (PA6 | ALT1)
+#define PA7_ALT1 (PA7 | ALT1)
+#define PA7_ALT2 (PA7 | ALT2)
+#define PA7_ALT3 (PA7 | ALT3)
+#define PA15_ALT1 (PA15 | ALT1)
+#define PB0_ALT1 (PB0 | ALT1)
+#define PB0_ALT2 (PB0 | ALT2)
+#define PB1_ALT1 (PB1 | ALT1)
+#define PB1_ALT2 (PB1 | ALT2)
+#define PB3_ALT1 (PB3 | ALT1)
+#define PB4_ALT1 (PB4 | ALT1)
+// #define PB5_ALT1 (PB5 | ALT1) // NC
+#define PB6_ALT1 (PB6 | ALT1)
+#define PB7_ALT1 (PB7 | ALT1)
+// #define PB8_ALT1 (PB8 | ALT1) // NC
+#define PB9_ALT1 (PB9 | ALT1)
+#define PB10_ALT1 (PB10 | ALT1)
+#define PB11_ALT1 (PB11 | ALT1)
+#define PB13_ALT1 (PB13 | ALT1)
+#define PB14_ALT1 (PB14 | ALT1)
+#define PB14_ALT2 (PB14 | ALT2)
+#define PB15_ALT1 (PB15 | ALT1)
+#define PB15_ALT2 (PB15 | ALT2)
+#define PC6_ALT1 (PC6 | ALT1)
+// #define PC7_ALT1 (PC7 | ALT1) // NC
+// #define PC8_ALT1 (PC8 | ALT1) // NC
+#define PC9_ALT1 (PC9 | ALT1)
+// #define PC10_ALT1 (PC10 | ALT1) // NC
+#define PC11_ALT1 (PC11 | ALT1)
+
+#define NUM_DIGITAL_PINS 75
+#define NUM_ANALOG_INPUTS 16
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+ #define LED_BUILTIN PE2
+#endif
+
+// On-board user button
+#ifndef USER_BTN
+ #define USER_BTN PC13
+#endif
+
+// On-board user button
+#ifndef ENABLE_3V3
+ #define ENABLE_3V3 PE4
+#endif
+
+// I2C definitions
+#ifndef PIN_WIRE_SDA
+ #define PIN_WIRE_SDA PB7
+#endif
+#ifndef PIN_WIRE_SCL
+ #define PIN_WIRE_SCL PB6
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+ #define TIMER_TONE TIM6
+#endif
+#ifndef TIMER_SERVO
+ #define TIMER_SERVO TIM7
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+ #define SERIAL_UART_INSTANCE 1
+#endif
+
+// Default pin used for generic 'Serial' instance
+// Mandatory for Firmata
+#ifndef PIN_SERIAL_RX
+ #define PIN_SERIAL_RX PA10
+#endif
+#ifndef PIN_SERIAL_TX
+ #define PIN_SERIAL_TX PA9
+#endif
+
+// Extra HAL modules
+#if !defined(HAL_DAC_MODULE_DISABLED)
+ #define HAL_DAC_MODULE_ENABLED
+#endif
+#if !defined(HAL_OSPI_MODULE_DISABLED)
+ #define HAL_OSPI_MODULE_ENABLED
+#endif
+// Disabled as some SDMMC pins are NC
+// #if !defined(HAL_SD_MODULE_DISABLED)
+// #define HAL_SD_MODULE_ENABLED
+// #endif
+
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ // These serial port names are intended to allow libraries and architecture-neutral
+ // sketches to automatically default to the correct port name for a particular type
+ // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+ // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+ //
+ // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+ //
+ // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+ //
+ // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+ //
+ // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+ //
+ // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+ // pins are NOT connected to anything by default.
+ #ifndef SERIAL_PORT_MONITOR
+ #define SERIAL_PORT_MONITOR Serial
+ #endif
+ #ifndef SERIAL_PORT_HARDWARE
+ #define SERIAL_PORT_HARDWARE Serial
+ #endif
+#endif