diff --git a/README.md b/README.md
index 594206a393..a3470b1a70 100644
--- a/README.md
+++ b/README.md
@@ -105,6 +105,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| :green_heart: | STM32F411RE | [Nucleo F411RE](http://www.st.com/en/evaluation-tools/nucleo-f411re.html) | *0.2.1* | |
| :green_heart: | STM32F446RE | [Nucleo F446RE](http://www.st.com/en/evaluation-tools/nucleo-f446re.html) | *1.1.1* | |
| :green_heart: | STM32G071RB | [Nucleo G071RB](https://www.st.com/en/evaluation-tools/nucleo-g071rb.html) | *1.6.0* | |
+| :yellow_heart: | STM32G0B1RE | [Nucleo G0B1RE](https://www.st.com/en/evaluation-tools/nucleo-g0b1re.html) | **2.1.0** | |
| :green_heart: | STM32G431RB | [Nucleo G431RB](https://www.st.com/en/evaluation-tools/nucleo-g431rb.html) | *1.7.0* | |
| :green_heart: | STM32G474RE | [Nucleo G474RE](https://www.st.com/en/evaluation-tools/nucleo-g474re.html) | *1.7.0* | |
| :yellow_heart: | STM32L010RB | [Nucleo L010RB](https://www.st.com/en/evaluation-tools/nucleo-l010rb.html) | **2.1.0** | |
@@ -289,6 +290,8 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| :green_heart: | STM32G041K6<br>STM32G041K8 | Generic Board | *2.0.0* | |
| :green_heart: | STM32G071R6<br>STM32G071R8<br>STM32G071RB | Generic Board | *2.0.0* | |
| :green_heart: | STM32G081RB | Generic Board | *2.0.0* | |
+| :yellow_heart: | STM32G0B1RB<br>STM32G0B1RC<br>STM32G0B1RE | Generic Board | **2.1.0** | |
+| :yellow_heart: | STM32G0C1RB<br>STM32G0C1RE | Generic Board | **2.1.0** | |
### Generic STM32G4 boards
diff --git a/boards.txt b/boards.txt
index 29f25d64b2..30b17271ea 100644
--- a/boards.txt
+++ b/boards.txt
@@ -347,6 +347,19 @@ Nucleo_64.menu.pnum.NUCLEO_G071RB.build.variant=STM32G0xx/G071R(6-8)T_G071RB(I-T
Nucleo_64.menu.pnum.NUCLEO_G071RB.build.cmsis_lib_gcc=arm_cortexM0l_math
Nucleo_64.menu.pnum.NUCLEO_G071RB.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -D__CORTEX_SC=0
+# NUCLEO_G0B1RE board
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE=Nucleo G0B1RE
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.node=NOD_G0B1RE
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.upload.maximum_size=262144
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.upload.maximum_data_size=147456
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.mcu=cortex-m0plus
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.board=NUCLEO_G0B1RE
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.series=STM32G0xx
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.product_line=STM32G0B1xx
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.variant=STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.cmsis_lib_gcc=arm_cortexM0l_math
+Nucleo_64.menu.pnum.NUCLEO_G0B1RE.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -D__CORTEX_SC=0
+
# NUCLEO_G431RB board
Nucleo_64.menu.pnum.NUCLEO_G431RB=Nucleo G431RB
Nucleo_64.menu.pnum.NUCLEO_G431RB.node="NODE_G431RB,NOD_G431RB"
@@ -3261,6 +3274,46 @@ GenG0.menu.pnum.GENERIC_G081RBTX.build.board=GENERIC_G081RBTX
GenG0.menu.pnum.GENERIC_G081RBTX.build.product_line=STM32G081xx
GenG0.menu.pnum.GENERIC_G081RBTX.build.variant=STM32G0xx/G071R(6-8)T_G071RB(I-T)_G081RB(I-T)
+# Generic G0B1RBTx
+GenG0.menu.pnum.GENERIC_G0B1RBTX=Generic G0B1RBTx
+GenG0.menu.pnum.GENERIC_G0B1RBTX.upload.maximum_size=131072
+GenG0.menu.pnum.GENERIC_G0B1RBTX.upload.maximum_data_size=147456
+GenG0.menu.pnum.GENERIC_G0B1RBTX.build.board=GENERIC_G0B1RBTX
+GenG0.menu.pnum.GENERIC_G0B1RBTX.build.product_line=STM32G0B1xx
+GenG0.menu.pnum.GENERIC_G0B1RBTX.build.variant=STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T
+
+# Generic G0B1RCTx
+GenG0.menu.pnum.GENERIC_G0B1RCTX=Generic G0B1RCTx
+GenG0.menu.pnum.GENERIC_G0B1RCTX.upload.maximum_size=262144
+GenG0.menu.pnum.GENERIC_G0B1RCTX.upload.maximum_data_size=147456
+GenG0.menu.pnum.GENERIC_G0B1RCTX.build.board=GENERIC_G0B1RCTX
+GenG0.menu.pnum.GENERIC_G0B1RCTX.build.product_line=STM32G0B1xx
+GenG0.menu.pnum.GENERIC_G0B1RCTX.build.variant=STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T
+
+# Generic G0B1RETx
+GenG0.menu.pnum.GENERIC_G0B1RETX=Generic G0B1RETx
+GenG0.menu.pnum.GENERIC_G0B1RETX.upload.maximum_size=524288
+GenG0.menu.pnum.GENERIC_G0B1RETX.upload.maximum_data_size=147456
+GenG0.menu.pnum.GENERIC_G0B1RETX.build.board=GENERIC_G0B1RETX
+GenG0.menu.pnum.GENERIC_G0B1RETX.build.product_line=STM32G0B1xx
+GenG0.menu.pnum.GENERIC_G0B1RETX.build.variant=STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T
+
+# Generic G0C1RCTx
+GenG0.menu.pnum.GENERIC_G0C1RCTX=Generic G0C1RCTx
+GenG0.menu.pnum.GENERIC_G0C1RCTX.upload.maximum_size=262144
+GenG0.menu.pnum.GENERIC_G0C1RCTX.upload.maximum_data_size=147456
+GenG0.menu.pnum.GENERIC_G0C1RCTX.build.board=GENERIC_G0C1RCTX
+GenG0.menu.pnum.GENERIC_G0C1RCTX.build.product_line=STM32G0C1xx
+GenG0.menu.pnum.GENERIC_G0C1RCTX.build.variant=STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T
+
+# Generic G0C1RETx
+GenG0.menu.pnum.GENERIC_G0C1RETX=Generic G0C1RETx
+GenG0.menu.pnum.GENERIC_G0C1RETX.upload.maximum_size=524288
+GenG0.menu.pnum.GENERIC_G0C1RETX.upload.maximum_data_size=147456
+GenG0.menu.pnum.GENERIC_G0C1RETX.build.board=GENERIC_G0C1RETX
+GenG0.menu.pnum.GENERIC_G0C1RETX.build.product_line=STM32G0C1xx
+GenG0.menu.pnum.GENERIC_G0C1RETX.build.variant=STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T
+
# Upload menu
GenG0.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD)
GenG0.menu.upload_method.swdMethod.upload.protocol=0
diff --git a/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/generic_clock.c b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/generic_clock.c
index 256e7eaf9c..7e3c6ac6c5 100644
--- a/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/generic_clock.c
+++ b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/generic_clock.c
@@ -22,8 +22,49 @@
*/
WEAK void SystemClock_Config(void)
{
- /* SystemClock_Config can be generated by STM32CubeMX */
-#warning "SystemClock_Config() is empty. Default clock at reset is used."
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
+
+ /** Configure the main internal regulator output voltage
+ */
+ HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+ RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
+ RCC_OscInitStruct.PLL.PLLN = 8;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+ RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+ | RCC_CLOCKTYPE_PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the peripherals clocks
+ */
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+ PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+ Error_Handler();
+ }
}
#endif /* ARDUINO_GENERIC_* */
diff --git a/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/ldscript.ld b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/ldscript.ld
new file mode 100644
index 0000000000..3b619b6a97
--- /dev/null
+++ b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/ldscript.ld
@@ -0,0 +1,177 @@
+/**
+ ******************************************************************************
+ * @file LinkerScript.ld
+ * @author Auto-generated by STM32CubeIDE
+ * @brief Linker script for STM32G0B1RETx Device from STM32G0 series
+ * 512Kbytes FLASH
+ * 144Kbytes RAM
+ *
+ * Set heap size, stack size and stack location according
+ * to application requirements.
+ *
+ * Set memory bank area and size if external memory is used
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
+ FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
+}
+
+/* Sections */
+SECTIONS
+{
+ /* The startup code into "FLASH" Rom type memory */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data into "FLASH" Rom type memory */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data into "FLASH" Rom type memory */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : {
+ . = ALIGN(4);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM : {
+ . = ALIGN(4);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(4);
+ } >FLASH
+
+ .preinit_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .init_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .fini_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ /* Used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections into "RAM" Ram type memory */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+ *(.RamFunc) /* .RamFunc sections */
+ *(.RamFunc*) /* .RamFunc* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section into "RAM" Ram type memory */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss section */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+ /* Remove information from the compiler libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/variant_NUCLEO_G0B1RE.cpp b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/variant_NUCLEO_G0B1RE.cpp
new file mode 100644
index 0000000000..52fb476887
--- /dev/null
+++ b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/variant_NUCLEO_G0B1RE.cpp
@@ -0,0 +1,169 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+
+#if defined(ARDUINO_NUCLEO_G0B1RE)
+#include "pins_arduino.h"
+
+// Pin number
+const PinName digitalPin[] = {
+ PC_5,
+ PC_4,
+ PA_10,
+ PB_3,
+ PB_5,
+ PB_4,
+ PB_14,
+ PA_8,
+ PA_9,
+ PC_7,
+ PB_0,
+ PA_7,
+ PA_6,
+ PA_5,
+ PB_9,
+ PB_8,
+ // ST Morpho
+ // CN7 Left Side
+ PC_10,
+ PC_12,
+ PA_14,
+ PD_0,
+ PD_3,
+ PA_13,
+ PD_4,
+ PA_15,
+ PB_7,
+ PC_13,
+ PC_14,
+ PC_15,
+ PF_0,
+ PF_1,
+ PC_2,
+ PC_3,
+ // CN7 Right Side
+ PC_11,
+ PD_2,
+ PD_1,
+ PD_5,
+ // CN10 Left Side
+ PC_9,
+ // CN10 Right side
+ PC_8,
+ PC_6,
+ PA_3,
+ PD_6,
+ PA_12,
+ PA_11,
+ PC_1,
+ PC_0,
+ PB_2,
+ PB_6,
+ PB_15,
+ PB_10,
+ PB_13,
+ PA_2,
+ PD_8,
+ PD_9,
+ PA_0,
+ PA_1,
+ PA_4,
+ PB_1,
+ PB_11,
+ PB_12,
+ PF_2,
+ PA_9_R,
+ PA_10_R
+};
+
+// Analog (Ax) pin number array
+const uint32_t analogInputPin[] = {
+ 53, //A0
+ 54, //A1
+ 55, //A2
+ 56, //A3
+ 57, //A4
+ 58, //A5
+ 11, //A6
+ 12, //A7
+ 45, //A8
+ 48, //A9
+ 0, //A10
+ 1, //A11
+ 10, //A12
+ 13, //A13 - LED
+ 39, //A14 - STLINK RX
+ 50 //A15 - STLINK TX
+};
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief System Clock Configuration
+ * @param None
+ * @retval None
+ */
+WEAK void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
+
+ /** Configure the main internal regulator output voltage
+ */
+ HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+ RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
+ RCC_OscInitStruct.PLL.PLLN = 8;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+ RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+ | RCC_CLOCKTYPE_PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+ Error_Handler();
+ }
+ /** Initializes the peripherals clocks
+ */
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+ PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+ Error_Handler();
+ }
+}
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* ARDUINO_NUCLEO_G0B1RE */
diff --git a/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/variant_NUCLEO_G0B1RE.h b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/variant_NUCLEO_G0B1RE.h
new file mode 100644
index 0000000000..6afce45fe5
--- /dev/null
+++ b/variants/STM32G0xx/G0B1R(B-C-E)T_G0C1R(C-E)T/variant_NUCLEO_G0B1RE.h
@@ -0,0 +1,194 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#pragma once
+
+/*----------------------------------------------------------------------------
+ * STM32 pins number
+ *----------------------------------------------------------------------------*/
+#define PC5 PIN_A10
+#define PC4 PIN_A11
+#define PA10 2
+#define PB3 3
+#define PB5 4
+#define PB4 5
+#define PB14 6
+#define PA8 7
+#define PA9 8
+#define PC7 9
+#define PB0 PIN_A12
+#define PA7 PIN_A6
+#define PA6 PIN_A7
+#define PA5 PIN_A13 // LED
+#define PB9 14
+#define PB8 15
+// ST Morpho
+// CN7 Left Side
+#define PC10 16
+#define PC12 17
+#define PA14 18 // SWD
+#define PD0 19
+#define PD3 20
+#define PA13 21 // SWD
+#define PD4 22
+#define PA15 23
+#define PB7 24
+#define PC13 25
+#define PC14 26
+#define PC15 27
+#define PF0 28
+#define PF1 29
+#define PC2 30
+#define PC3 31
+// CN7 Right Side
+#define PC11 32
+#define PD2 33
+#define PD1 34
+#define PD5 35
+// CN10 Left Side
+#define PC9 36
+// CN10 Right side
+#define PC8 37
+#define PC6 38
+#define PA3 PIN_A14
+#define PD6 40
+#define PA12 41
+#define PA11 42
+#define PC1 43
+#define PC0 44
+#define PB2 PIN_A8
+#define PB6 46
+#define PB15 47
+#define PB10 PIN_A9
+#define PB13 49
+#define PA2 PIN_A15
+#define PD8 51
+#define PD9 52
+#define PA0 PIN_A0
+#define PA1 PIN_A1
+#define PA4 PIN_A2
+#define PB1 PIN_A3
+#define PB11 PIN_A4
+#define PB12 PIN_A5
+#define PF2 59
+#define PA9_R 60
+#define PA10_R 61
+
+// Alternate pins number
+#define PA1_ALT1 (PA1 | ALT1)
+#define PA2_ALT1 (PA2 | ALT1)
+#define PA3_ALT1 (PA3 | ALT1)
+#define PA4_ALT1 (PA4 | ALT1)
+#define PA6_ALT1 (PA6 | ALT1)
+#define PA6_ALT2 (PA6 | ALT2)
+#define PA7_ALT1 (PA7 | ALT1)
+#define PA7_ALT2 (PA7 | ALT2)
+#define PA7_ALT3 (PA7 | ALT3)
+#define PA9_ALT1 (PA9 | ALT1)
+#define PA9_R_ALT1 (PA9_R | ALT1)
+#define PA10_ALT1 (PA10 | ALT1)
+#define PA10_R_ALT1 (PA10_R | ALT1)
+#define PA14_ALT1 (PA14 | ALT1)
+#define PA15_ALT1 (PA15 | ALT1)
+#define PB0_ALT1 (PB0 | ALT1)
+#define PB1_ALT1 (PB1 | ALT1)
+#define PB1_ALT2 (PB1 | ALT2)
+#define PB3_ALT1 (PB3 | ALT1)
+#define PB4_ALT1 (PB4 | ALT1)
+#define PB5_ALT1 (PB5 | ALT1)
+#define PB6_ALT1 (PB6 | ALT1)
+#define PB6_ALT2 (PB6 | ALT2)
+#define PB7_ALT1 (PB7 | ALT1)
+#define PB8_ALT1 (PB8 | ALT1)
+#define PB9_ALT1 (PB9 | ALT1)
+#define PB13_ALT1 (PB13 | ALT1)
+#define PB14_ALT1 (PB14 | ALT1)
+#define PB15_ALT1 (PB15 | ALT1)
+#define PB15_ALT2 (PB15 | ALT2)
+#define PC0_ALT1 (PC0 | ALT1)
+#define PC1_ALT1 (PC1 | ALT1)
+#define PC4_ALT1 (PC4 | ALT1)
+#define PC5_ALT1 (PC5 | ALT1)
+#define PC6_ALT1 (PC6 | ALT1)
+#define PC7_ALT1 (PC7 | ALT1)
+#define PC8_ALT1 (PC8 | ALT1)
+#define PC9_ALT1 (PC9 | ALT1)
+#define PC10_ALT1 (PC10 | ALT1)
+#define PC11_ALT1 (PC11 | ALT1)
+#define PD4_ALT1 (PD4 | ALT1)
+
+#define NUM_DIGITAL_PINS 62
+#define NUM_REMAP_PINS 2
+#define NUM_ANALOG_INPUTS 16
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+ #define LED_BUILTIN PA5
+#endif
+#define LED_GREEN LED_BUILTIN
+
+// On-board user button
+#ifndef USER_BTN
+ #define USER_BTN PC13
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+ #define TIMER_TONE TIM6
+#endif
+#ifndef TIMER_SERVO
+ #define TIMER_SERVO TIM7
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+ #define SERIAL_UART_INSTANCE 101 //Connected to ST-Link
+#endif
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#ifndef PIN_SERIAL_RX
+ #define PIN_SERIAL_RX PA3
+#endif
+#ifndef PIN_SERIAL_TX
+ #define PIN_SERIAL_TX PA2
+#endif
+
+// Extra HAL modules
+#if !defined(HAL_DAC_MODULE_DISABLED)
+ #define HAL_DAC_MODULE_ENABLED
+#endif
+
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ // These serial port names are intended to allow libraries and architecture-neutral
+ // sketches to automatically default to the correct port name for a particular type
+ // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+ // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+ //
+ // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+ //
+ // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+ //
+ // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+ //
+ // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+ //
+ // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+ // pins are NOT connected to anything by default.
+ #define SERIAL_PORT_MONITOR Serial
+ #define SERIAL_PORT_HARDWARE Serial2
+#endif