How to change vector table address for my application?

[mucahitturk]

Hello I developed custom bootloader application and test application in keil ide and it is working for stm32f103c8t6 .

There is a project that developed with arduino ide and i just want to change start position of this program.

For test application, i added VECT_TAB_OFFSET 0x00002000 and i changed the rom1 start address from 0x8000000 to 0x8002000 in keil ide.In this configuration test application is working when i uploaded using bootloader app.

How can i set same configuration in the arduino ide?

[fpistm]

Hi @mucahitturk
which core you used as it seems you already open an issue to other core:
#1991

[fpistm]

Which link you used?

[mucahitturk]

http://dan.drown.org/stm32duino/package_STM32duino_index.json

[fpistm]

OK. So this is not this core. Refers to this issue. Hope you will get answer else you can try the forum in the section libMaple:
https://www.stm32duino.com/viewforum.php?f=63

[mucahitturk]

Hello,
I changed the link. New link is https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json.
How can I change vector table address of my application now?

[fpistm]

Which target you used in the menu ?

[mucahitturk]

[fpistm]

what is your board exactly? LED pin?

[mucahitturk]

The board is STM32f103c8t6 - Blue Pill. Led is connected to GPIOC13.

[fpistm]

If it is a BluePill then simply select BluePill F103C8 in the menu and select the Maple DFU Bootloader 2.0 upload method, this will set the offset to 0x2000. then flash manually the binary at offset.

[fpistm]

sketch_apr4a.ino.bin.zip

[fpistm]

Just for my information what is the sketch you build?