Skip to content

Commit b5662d7

Browse files
fpistmfpistm
committed
Add all generated STM32F0xx generic variant files
Signed-off-by: Frederic Pillon <[email protected]>
1 parent 20e6e72 commit b5662d7

File tree

354 files changed

+32513
-0
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

354 files changed

+32513
-0
lines changed

Diff for: ‎variants/STM32F0xx/F030C6T/PeripheralPins.c

+195
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,195 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32F030C6Tx.xml
15+
* CubeMX DB release 6.0.21
16+
*/
17+
#if !defined(CUSTOM_PERIPHERAL_PINS)
18+
#include "Arduino.h"
19+
#include "PeripheralPins.h"
20+
21+
/* =====
22+
* Notes:
23+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
24+
* HW peripheral instances. You can use them the same way as any other "normal"
25+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
26+
*
27+
* - Commented lines are alternative possibilities which are not used per default.
28+
* If you change them, you will have to know what you do
29+
* =====
30+
*/
31+
32+
//*** ADC ***
33+
34+
#ifdef HAL_ADC_MODULE_ENABLED
35+
WEAK const PinMap PinMap_ADC[] = {
36+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
37+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
38+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
39+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
40+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
41+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
42+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
43+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
44+
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
45+
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
46+
{NC, NP, 0}
47+
};
48+
#endif
49+
50+
//*** No DAC ***
51+
52+
//*** I2C ***
53+
54+
#ifdef HAL_I2C_MODULE_ENABLED
55+
WEAK const PinMap PinMap_I2C_SDA[] = {
56+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
57+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
58+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
59+
{PB_11, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
60+
{PF_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)},
61+
{NC, NP, 0}
62+
};
63+
#endif
64+
65+
#ifdef HAL_I2C_MODULE_ENABLED
66+
WEAK const PinMap PinMap_I2C_SCL[] = {
67+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
68+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
69+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
70+
{PB_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
71+
{PF_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)},
72+
{NC, NP, 0}
73+
};
74+
#endif
75+
76+
//*** TIM ***
77+
78+
#ifdef HAL_TIM_MODULE_ENABLED
79+
WEAK const PinMap PinMap_TIM[] = {
80+
{PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
81+
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
82+
{PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
83+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
84+
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
85+
{PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
86+
{PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1
87+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
88+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
89+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
90+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
91+
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
92+
{PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3
93+
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
94+
{PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4
95+
{PB_1_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1
96+
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
97+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
98+
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N
99+
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N
100+
{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1
101+
{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1
102+
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
103+
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
104+
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
105+
{NC, NP, 0}
106+
};
107+
#endif
108+
109+
//*** UART ***
110+
111+
#ifdef HAL_UART_MODULE_ENABLED
112+
WEAK const PinMap PinMap_UART_TX[] = {
113+
{PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
114+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
115+
{PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
116+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
117+
{NC, NP, 0}
118+
};
119+
#endif
120+
121+
#ifdef HAL_UART_MODULE_ENABLED
122+
WEAK const PinMap PinMap_UART_RX[] = {
123+
{PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
124+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
125+
{PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
126+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
127+
{NC, NP, 0}
128+
};
129+
#endif
130+
131+
#ifdef HAL_UART_MODULE_ENABLED
132+
WEAK const PinMap PinMap_UART_RTS[] = {
133+
{PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
134+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
135+
{NC, NP, 0}
136+
};
137+
#endif
138+
139+
#ifdef HAL_UART_MODULE_ENABLED
140+
WEAK const PinMap PinMap_UART_CTS[] = {
141+
{PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
142+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
143+
{NC, NP, 0}
144+
};
145+
#endif
146+
147+
//*** SPI ***
148+
149+
#ifdef HAL_SPI_MODULE_ENABLED
150+
WEAK const PinMap PinMap_SPI_MOSI[] = {
151+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
152+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
153+
{PB_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
154+
{NC, NP, 0}
155+
};
156+
#endif
157+
158+
#ifdef HAL_SPI_MODULE_ENABLED
159+
WEAK const PinMap PinMap_SPI_MISO[] = {
160+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
161+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
162+
{PB_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
163+
{NC, NP, 0}
164+
};
165+
#endif
166+
167+
#ifdef HAL_SPI_MODULE_ENABLED
168+
WEAK const PinMap PinMap_SPI_SCLK[] = {
169+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
170+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
171+
{PB_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
172+
{NC, NP, 0}
173+
};
174+
#endif
175+
176+
#ifdef HAL_SPI_MODULE_ENABLED
177+
WEAK const PinMap PinMap_SPI_SSEL[] = {
178+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
179+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
180+
{PB_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
181+
{NC, NP, 0}
182+
};
183+
#endif
184+
185+
//*** No CAN ***
186+
187+
//*** No ETHERNET ***
188+
189+
//*** No QUADSPI ***
190+
191+
//*** No USB ***
192+
193+
//*** No SD ***
194+
195+
#endif /* !CUSTOM_PERIPHERAL_PINS */

Diff for: ‎variants/STM32F0xx/F030C6T/PinNamesVar.h

+36
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,36 @@
1+
/* Alternate pin name */
2+
PA_6_ALT1 = PA_6 | ALT1,
3+
PA_7_ALT1 = PA_7 | ALT1,
4+
PA_7_ALT2 = PA_7 | ALT2,
5+
PA_7_ALT3 = PA_7 | ALT3,
6+
PB_0_ALT1 = PB_0 | ALT1,
7+
PB_1_ALT1 = PB_1 | ALT1,
8+
PB_1_ALT2 = PB_1 | ALT2,
9+
10+
/* SYS_WKUP */
11+
#ifdef PWR_WAKEUP_PIN1
12+
SYS_WKUP1 = PA_0,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN2
15+
SYS_WKUP2 = PC_13,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN3
18+
SYS_WKUP3 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN4
21+
SYS_WKUP4 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN5
24+
SYS_WKUP5 = NC,
25+
#endif
26+
#ifdef PWR_WAKEUP_PIN6
27+
SYS_WKUP6 = NC,
28+
#endif
29+
#ifdef PWR_WAKEUP_PIN7
30+
SYS_WKUP7 = NC,
31+
#endif
32+
#ifdef PWR_WAKEUP_PIN8
33+
SYS_WKUP8 = NC,
34+
#endif
35+
36+
/* No USB */

Diff for: ‎variants/STM32F0xx/F030C6T/boards_entry.txt

+13
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,13 @@
1+
# This file help to add generic board entry.
2+
# upload.maximum_size and product_line have to be verified
3+
# and changed if needed.
4+
# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29
5+
6+
# Generic F030C6Tx
7+
GenF0.menu.pnum.GENERIC_F030C6TX=Generic F030C6Tx
8+
GenF0.menu.pnum.GENERIC_F030C6TX.upload.maximum_size=32768
9+
GenF0.menu.pnum.GENERIC_F030C6TX.upload.maximum_data_size=4096
10+
GenF0.menu.pnum.GENERIC_F030C6TX.build.board=GENERIC_F030C6TX
11+
GenF0.menu.pnum.GENERIC_F030C6TX.build.product_line=STM32F030x6
12+
GenF0.menu.pnum.GENERIC_F030C6TX.build.variant=STM32F0xx/F030C6T
13+

Diff for: ‎variants/STM32F0xx/F030C6T/generic_clock.c

+27
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,27 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_F030C6TX)
14+
#include "pins_arduino.h"
15+
16+
/**
17+
* @brief System Clock Configuration
18+
* @param None
19+
* @retval None
20+
*/
21+
WEAK void SystemClock_Config(void)
22+
{
23+
/* SystemClock_Config can be generated by STM32CubeMX */
24+
#warning "SystemClock_Config() is empty. Default clock at reset is used."
25+
}
26+
27+
#endif /* ARDUINO_GENERIC_* */

Diff for: ‎variants/STM32F0xx/F030C6T/variant_generic.cpp

+73
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,73 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_F030C6TX)
14+
#include "pins_arduino.h"
15+
16+
// Digital PinName array
17+
const PinName digitalPin[] = {
18+
PA_0, // D1/A0
19+
PA_1, // D2/A1
20+
PA_2, // D3/A2
21+
PA_3, // D4/A3
22+
PA_4, // D5/A4
23+
PA_5, // D6/A5
24+
PA_6, // D7/A6
25+
PA_7, // D8/A7
26+
PA_8, // D9
27+
PA_9, // D10
28+
PA_10, // D11
29+
PA_11, // D12
30+
PA_12, // D13
31+
PA_13, // D14
32+
PA_14, // D15
33+
PA_15, // D16
34+
PB_0, // D17/A8
35+
PB_1, // D18/A9
36+
PB_2, // D19
37+
PB_3, // D20
38+
PB_4, // D21
39+
PB_5, // D22
40+
PB_6, // D23
41+
PB_7, // D24
42+
PB_8, // D25
43+
PB_9, // D26
44+
PB_10, // D27
45+
PB_11, // D28
46+
PB_12, // D29
47+
PB_13, // D30
48+
PB_14, // D31
49+
PB_15, // D32
50+
PC_13, // D33
51+
PC_14, // D34
52+
PC_15, // D35
53+
PF_0, // D36
54+
PF_1, // D37
55+
PF_6, // D38
56+
PF_7 // D39
57+
};
58+
59+
// Analog (Ax) pin number array
60+
const uint32_t analogInputPin[] = {
61+
0, // A0, PA0
62+
1, // A1, PA1
63+
2, // A2, PA2
64+
3, // A3, PA3
65+
4, // A4, PA4
66+
5, // A5, PA5
67+
6, // A6, PA6
68+
7, // A7, PA7
69+
16, // A8, PB0
70+
17 // A9, PB1
71+
};
72+
73+
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)