Skip to content

Commit 6426bf4

Browse files
fpistmfpistm
committed
variants(C0): add all generated STM32C0xx generic variant files
Signed-off-by: Frederic Pillon <[email protected]>
1 parent b0dceed commit 6426bf4

30 files changed

+3059
-0
lines changed

‎variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PeripheralPins.c

+228
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,228 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32C011D6Yx.xml, STM32C011F(4-6)Px.xml
15+
* STM32C011F(4-6)Ux.xml, STM32C031F(4-6)Px.xml
16+
* CubeMX DB release 6.0.70
17+
*/
18+
#if !defined(CUSTOM_PERIPHERAL_PINS)
19+
#include "Arduino.h"
20+
#include "PeripheralPins.h"
21+
22+
/* =====
23+
* Notes:
24+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
25+
* HW peripheral instances. You can use them the same way as any other "normal"
26+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
27+
*
28+
* - Commented lines are alternative possibilities which are not used per default.
29+
* If you change them, you will have to know what you do
30+
* =====
31+
*/
32+
33+
//*** ADC ***
34+
35+
#ifdef HAL_ADC_MODULE_ENABLED
36+
WEAK const PinMap PinMap_ADC[] = {
37+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
38+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
39+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
40+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
41+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
42+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
43+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
44+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
45+
{PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
46+
{PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
47+
{PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
48+
{PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
49+
{PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
50+
{NC, NP, 0}
51+
};
52+
#endif
53+
54+
//*** No DAC ***
55+
56+
//*** I2C ***
57+
58+
#ifdef HAL_I2C_MODULE_ENABLED
59+
WEAK const PinMap PinMap_I2C_SDA[] = {
60+
{PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
61+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
62+
{PC_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)},
63+
{NC, NP, 0}
64+
};
65+
#endif
66+
67+
#ifdef HAL_I2C_MODULE_ENABLED
68+
WEAK const PinMap PinMap_I2C_SCL[] = {
69+
{PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
70+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
71+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)},
72+
{NC, NP, 0}
73+
};
74+
#endif
75+
76+
//*** TIM ***
77+
78+
#ifdef HAL_TIM_MODULE_ENABLED
79+
WEAK const PinMap PinMap_TIM[] = {
80+
{PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1
81+
{PA_0_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1
82+
{PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 0)}, // TIM1_CH2
83+
{PA_1_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1
84+
{PA_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 3, 0)}, // TIM1_CH3
85+
{PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N
86+
{PA_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
87+
{PA_3_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 4, 0)}, // TIM1_CH4
88+
{PA_4, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
89+
{PA_4_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
90+
{PA_4_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 1)}, // TIM17_CH1N
91+
{PA_5, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1
92+
{PA_5_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
93+
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
94+
{PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
95+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
96+
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
97+
{PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
98+
{PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1
99+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
100+
{PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM1, 2, 1)}, // TIM1_CH2N
101+
{PA_8_ALT2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 3, 1)}, // TIM1_CH3N
102+
{PA_8_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 3, 0)}, // TIM3_CH3
103+
{PA_8_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 4, 0)}, // TIM3_CH4
104+
{PA_8_ALT5, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM14, 1, 0)}, // TIM14_CH1
105+
{PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
106+
{PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
107+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
108+
{PA_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 1, 0)}, // TIM1_CH1
109+
{PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 2, 0)}, // TIM1_CH2
110+
{PB_6_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
111+
{PB_6_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 1, 0)}, // TIM3_CH1
112+
{PB_6_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM3, 2, 0)}, // TIM3_CH2
113+
{PB_6_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3
114+
{PB_6_ALT5, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N
115+
{PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
116+
{PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 1, 0)}, // TIM3_CH1
117+
{PB_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 4, 0)}, // TIM3_CH4
118+
{PB_7_ALT3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM16, 1, 0)}, // TIM16_CH1
119+
{PB_7_ALT4, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N
120+
{PC_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 2, 0)}, // TIM3_CH2
121+
{PC_14_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1
122+
{PC_15, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3
123+
{PF_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
124+
{NC, NP, 0}
125+
};
126+
#endif
127+
128+
//*** UART ***
129+
130+
#ifdef HAL_UART_MODULE_ENABLED
131+
WEAK const PinMap PinMap_UART_TX[] = {
132+
{PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
133+
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
134+
{PA_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
135+
{PA_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
136+
{PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
137+
{PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
138+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
139+
{PC_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
140+
{NC, NP, 0}
141+
};
142+
#endif
143+
144+
#ifdef HAL_UART_MODULE_ENABLED
145+
WEAK const PinMap PinMap_UART_RX[] = {
146+
{PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
147+
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
148+
{PA_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
149+
{PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_USART1)},
150+
{PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
151+
{PA_13, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
152+
{PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)},
153+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
154+
{NC, NP, 0}
155+
};
156+
#endif
157+
158+
#ifdef HAL_UART_MODULE_ENABLED
159+
WEAK const PinMap PinMap_UART_RTS[] = {
160+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
161+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
162+
{PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_USART1)},
163+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
164+
{PC_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)},
165+
{NC, NP, 0}
166+
};
167+
#endif
168+
169+
#ifdef HAL_UART_MODULE_ENABLED
170+
WEAK const PinMap PinMap_UART_CTS[] = {
171+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
172+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
173+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)},
174+
{PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)},
175+
{NC, NP, 0}
176+
};
177+
#endif
178+
179+
//*** SPI ***
180+
181+
#ifdef HAL_SPI_MODULE_ENABLED
182+
WEAK const PinMap PinMap_SPI_MOSI[] = {
183+
{PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
184+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
185+
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
186+
{PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)},
187+
{NC, NP, 0}
188+
};
189+
#endif
190+
191+
#ifdef HAL_SPI_MODULE_ENABLED
192+
WEAK const PinMap PinMap_SPI_MISO[] = {
193+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
194+
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
195+
{PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI1)},
196+
{NC, NP, 0}
197+
};
198+
#endif
199+
200+
#ifdef HAL_SPI_MODULE_ENABLED
201+
WEAK const PinMap PinMap_SPI_SCLK[] = {
202+
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
203+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
204+
{PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SPI1)},
205+
{NC, NP, 0}
206+
};
207+
#endif
208+
209+
#ifdef HAL_SPI_MODULE_ENABLED
210+
WEAK const PinMap PinMap_SPI_SSEL[] = {
211+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
212+
{PA_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)},
213+
{PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)},
214+
{NC, NP, 0}
215+
};
216+
#endif
217+
218+
//*** No CAN ***
219+
220+
//*** No ETHERNET ***
221+
222+
//*** No QUADSPI ***
223+
224+
//*** No USB ***
225+
226+
//*** No SD ***
227+
228+
#endif /* !CUSTOM_PERIPHERAL_PINS */

‎variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PinNamesVar.h

+59
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,59 @@
1+
/* Remap pin name */
2+
PA_9_R = PA_9 | PREMAP,
3+
PA_10_R = PA_10 | PREMAP,
4+
5+
/* Alternate pin name */
6+
PA_0_ALT1 = PA_0 | ALT1,
7+
PA_1_ALT1 = PA_1 | ALT1,
8+
PA_2_ALT1 = PA_2 | ALT1,
9+
PA_3_ALT1 = PA_3 | ALT1,
10+
PA_4_ALT1 = PA_4 | ALT1,
11+
PA_4_ALT2 = PA_4 | ALT2,
12+
PA_5_ALT1 = PA_5 | ALT1,
13+
PA_6_ALT1 = PA_6 | ALT1,
14+
PA_7_ALT1 = PA_7 | ALT1,
15+
PA_7_ALT2 = PA_7 | ALT2,
16+
PA_7_ALT3 = PA_7 | ALT3,
17+
PA_8_ALT1 = PA_8 | ALT1,
18+
PA_8_ALT2 = PA_8 | ALT2,
19+
PA_8_ALT3 = PA_8 | ALT3,
20+
PA_8_ALT4 = PA_8 | ALT4,
21+
PA_8_ALT5 = PA_8 | ALT5,
22+
PB_6_ALT1 = PB_6 | ALT1,
23+
PB_6_ALT2 = PB_6 | ALT2,
24+
PB_6_ALT3 = PB_6 | ALT3,
25+
PB_6_ALT4 = PB_6 | ALT4,
26+
PB_6_ALT5 = PB_6 | ALT5,
27+
PB_7_ALT1 = PB_7 | ALT1,
28+
PB_7_ALT2 = PB_7 | ALT2,
29+
PB_7_ALT3 = PB_7 | ALT3,
30+
PB_7_ALT4 = PB_7 | ALT4,
31+
PC_14_ALT1 = PC_14 | ALT1,
32+
33+
/* SYS_WKUP */
34+
#ifdef PWR_WAKEUP_PIN1
35+
SYS_WKUP1 = PA_0,
36+
#endif
37+
#ifdef PWR_WAKEUP_PIN2
38+
SYS_WKUP2 = PA_4,
39+
#endif
40+
#ifdef PWR_WAKEUP_PIN3
41+
SYS_WKUP3 = PB_6,
42+
#endif
43+
#ifdef PWR_WAKEUP_PIN4
44+
SYS_WKUP4 = PA_2,
45+
#endif
46+
#ifdef PWR_WAKEUP_PIN5
47+
SYS_WKUP5 = NC,
48+
#endif
49+
#ifdef PWR_WAKEUP_PIN6
50+
SYS_WKUP6 = NC,
51+
#endif
52+
#ifdef PWR_WAKEUP_PIN7
53+
SYS_WKUP7 = NC,
54+
#endif
55+
#ifdef PWR_WAKEUP_PIN8
56+
SYS_WKUP8 = NC,
57+
#endif
58+
59+
/* No USB */

‎variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/boards_entry.txt

+61
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,61 @@
1+
# This file help to add generic board entry.
2+
# upload.maximum_size and product_line have to be verified
3+
# and changed if needed.
4+
# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29
5+
6+
# Generic C011D6Yx
7+
GenC0.menu.pnum.GENERIC_C011D6YX=Generic C011D6Yx
8+
GenC0.menu.pnum.GENERIC_C011D6YX.upload.maximum_size=32768
9+
GenC0.menu.pnum.GENERIC_C011D6YX.upload.maximum_data_size=6144
10+
GenC0.menu.pnum.GENERIC_C011D6YX.build.board=GENERIC_C011D6YX
11+
GenC0.menu.pnum.GENERIC_C011D6YX.build.product_line=STM32C011xx
12+
GenC0.menu.pnum.GENERIC_C011D6YX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
13+
14+
# Generic C011F4Px
15+
GenC0.menu.pnum.GENERIC_C011F4PX=Generic C011F4Px
16+
GenC0.menu.pnum.GENERIC_C011F4PX.upload.maximum_size=16384
17+
GenC0.menu.pnum.GENERIC_C011F4PX.upload.maximum_data_size=6144
18+
GenC0.menu.pnum.GENERIC_C011F4PX.build.board=GENERIC_C011F4PX
19+
GenC0.menu.pnum.GENERIC_C011F4PX.build.product_line=STM32C011xx
20+
GenC0.menu.pnum.GENERIC_C011F4PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
21+
22+
# Generic C011F6Px
23+
GenC0.menu.pnum.GENERIC_C011F6PX=Generic C011F6Px
24+
GenC0.menu.pnum.GENERIC_C011F6PX.upload.maximum_size=32768
25+
GenC0.menu.pnum.GENERIC_C011F6PX.upload.maximum_data_size=6144
26+
GenC0.menu.pnum.GENERIC_C011F6PX.build.board=GENERIC_C011F6PX
27+
GenC0.menu.pnum.GENERIC_C011F6PX.build.product_line=STM32C011xx
28+
GenC0.menu.pnum.GENERIC_C011F6PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
29+
30+
# Generic C011F4Ux
31+
GenC0.menu.pnum.GENERIC_C011F4UX=Generic C011F4Ux
32+
GenC0.menu.pnum.GENERIC_C011F4UX.upload.maximum_size=16384
33+
GenC0.menu.pnum.GENERIC_C011F4UX.upload.maximum_data_size=6144
34+
GenC0.menu.pnum.GENERIC_C011F4UX.build.board=GENERIC_C011F4UX
35+
GenC0.menu.pnum.GENERIC_C011F4UX.build.product_line=STM32C011xx
36+
GenC0.menu.pnum.GENERIC_C011F4UX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
37+
38+
# Generic C011F6Ux
39+
GenC0.menu.pnum.GENERIC_C011F6UX=Generic C011F6Ux
40+
GenC0.menu.pnum.GENERIC_C011F6UX.upload.maximum_size=32768
41+
GenC0.menu.pnum.GENERIC_C011F6UX.upload.maximum_data_size=6144
42+
GenC0.menu.pnum.GENERIC_C011F6UX.build.board=GENERIC_C011F6UX
43+
GenC0.menu.pnum.GENERIC_C011F6UX.build.product_line=STM32C011xx
44+
GenC0.menu.pnum.GENERIC_C011F6UX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
45+
46+
# Generic C031F4Px
47+
GenC0.menu.pnum.GENERIC_C031F4PX=Generic C031F4Px
48+
GenC0.menu.pnum.GENERIC_C031F4PX.upload.maximum_size=16384
49+
GenC0.menu.pnum.GENERIC_C031F4PX.upload.maximum_data_size=12288
50+
GenC0.menu.pnum.GENERIC_C031F4PX.build.board=GENERIC_C031F4PX
51+
GenC0.menu.pnum.GENERIC_C031F4PX.build.product_line=STM32C031xx
52+
GenC0.menu.pnum.GENERIC_C031F4PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
53+
54+
# Generic C031F6Px
55+
GenC0.menu.pnum.GENERIC_C031F6PX=Generic C031F6Px
56+
GenC0.menu.pnum.GENERIC_C031F6PX.upload.maximum_size=32768
57+
GenC0.menu.pnum.GENERIC_C031F6PX.upload.maximum_data_size=12288
58+
GenC0.menu.pnum.GENERIC_C031F6PX.build.board=GENERIC_C031F6PX
59+
GenC0.menu.pnum.GENERIC_C031F6PX.build.product_line=STM32C031xx
60+
GenC0.menu.pnum.GENERIC_C031F6PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
61+

‎variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c

+30
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,30 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_C011D6YX) || defined(ARDUINO_GENERIC_C011F4PX) ||\
14+
defined(ARDUINO_GENERIC_C011F4UX) || defined(ARDUINO_GENERIC_C011F6PX) ||\
15+
defined(ARDUINO_GENERIC_C011F6UX) || defined(ARDUINO_GENERIC_C031F4PX) ||\
16+
defined(ARDUINO_GENERIC_C031F6PX)
17+
#include "pins_arduino.h"
18+
19+
/**
20+
* @brief System Clock Configuration
21+
* @param None
22+
* @retval None
23+
*/
24+
WEAK void SystemClock_Config(void)
25+
{
26+
/* SystemClock_Config can be generated by STM32CubeMX */
27+
#warning "SystemClock_Config() is empty. Default clock at reset is used."
28+
}
29+
30+
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)