[MP1] Update core to support MP1

Author: kbumsik

cores/arduino/HardwareTimer.cpp

@@ -947,6 +947,11 @@ timer_index_t get_timer_index(TIM_TypeDef *instance)
   */
 uint32_t HardwareTimer::getTimerClkFreq()
 {
+#if defined(STM32MP1xx)
+  uint8_t timerClkSrc = getTimerClkSrc(_timerObj.handle.Instance);
+  uint64_t clkSelection = timerClkSrc == 1 ? RCC_PERIPHCLK_TIMG1 : RCC_PERIPHCLK_TIMG2;
+  return HAL_RCCEx_GetPeriphCLKFreq(clkSelection);
+#else
   RCC_ClkInitTypeDef    clkconfig = {};
   uint32_t              pFLatency = 0U;
   uint32_t              uwTimclock = 0U, uwAPBxPrescaler = 0U;
@@ -1062,6 +1067,7 @@ uint32_t HardwareTimer::getTimerClkFreq()
     }
 #endif /* STM32H7xx */
   return uwTimclock;
+#endif /* STM32MP1xx */
 }
 
 /**

cores/arduino/stm32/analog.cpp

@@ -623,9 +623,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc)
 #ifdef __HAL_RCC_ADC_CLK_ENABLE
   __HAL_RCC_ADC_CLK_ENABLE();
 #endif
-  /* For STM32F1xx and STM32H7xx, ADC prescaler is configured in
+  /* For STM32F1xx, STM32H7xx, and STM32MP1xx ADC prescaler is configured in
      SystemClock_Config (variant.cpp) */
-#if defined(__HAL_RCC_ADC_CONFIG) && !defined(STM32F1xx) && !defined(STM32H7xx)
+#if defined(__HAL_RCC_ADC_CONFIG) && !defined(STM32F1xx) && \
+    !defined(STM32H7xx) && !defined(STM32MP1xx)
   /* ADC Periph interface clock configuration */
   __HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_SYSCLK);
 #endif
@@ -766,7 +767,7 @@ uint16_t adc_read_value(PinName pin)
   uint32_t samplingTime = ADC_SAMPLINGTIME;
   uint32_t channel = 0;
 
-  if (pin & PADC_BASE) {
+  if ((pin & PADC_BASE) && (pin < ANA_START)) {
 #if defined(STM32H7xx)
     AdcHandle.Instance = ADC3;
 #else
@@ -811,7 +812,8 @@ uint16_t adc_read_value(PinName pin)
 #endif
 #if !defined(STM32F1xx) && !defined(STM32F2xx) && !defined(STM32F3xx) && \
     !defined(STM32F4xx) && !defined(STM32F7xx) && !defined(STM32G4xx) && \
-    !defined(STM32H7xx) && !defined(STM32L4xx) && !defined(STM32WBxx)
+    !defined(STM32H7xx) && !defined(STM32L4xx) && !defined(STM32MP1xx) && \
+    !defined(STM32WBxx)
   AdcHandle.Init.LowPowerAutoPowerOff  = DISABLE;                       /* ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered */
 #endif
 #ifdef ADC_CHANNELS_BANK_A
@@ -829,7 +831,7 @@ uint16_t adc_read_value(PinName pin)
 #if !defined(STM32F1xx) && !defined(STM32F373xC) && !defined(STM32F378xx)
   AdcHandle.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE; /* Parameter discarded because software trigger chosen */
 #endif
-#if !defined(STM32F1xx) && !defined(STM32H7xx) && \
+#if !defined(STM32F1xx) && !defined(STM32H7xx) && !defined(STM32MP1xx) && \
     !defined(STM32F373xC) && !defined(STM32F378xx)
   AdcHandle.Init.DMAContinuousRequests = DISABLE;                       /* DMA one-shot mode selected (not applied to this example) */
 #endif

cores/arduino/stm32/backup.h

@@ -31,7 +31,8 @@ extern "C" {
 
 /* Exported macro ------------------------------------------------------------*/
 #if (!defined(STM32F0xx) && !defined(STM32F3xx) && !defined(STM32L0xx) &&\
-  !defined(STM32L1xx) && !defined(STM32L4xx)) || defined(RTC_BACKUP_SUPPORT)
+  !defined(STM32L1xx) && !defined(STM32L4xx) && !defined(STM32MP1xx)) || \
+  defined(RTC_BACKUP_SUPPORT)
 #if !defined(STM32L412xx) && !defined(STM32L422xx)
 #define ENABLE_BACKUP_SUPPORT
 #endif

cores/arduino/stm32/clock.c

@@ -43,6 +43,16 @@
 extern "C" {
 #endif
 
+#if defined(STM32MP1xx)
+#include "stm32mp1xx_hal.h"
+/* STM32MP1xx does not have own stm32mp1xx_ll_cortex.h so define functions manually.
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+  return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+#endif
+
 /**
   * @brief  Function called to read the current micro second
   * @param  None
@@ -100,6 +110,15 @@ void enableClock(sourceClock_t source)
   RCC_OscInitTypeDef RCC_OscInitStruct = {0};
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
 
+#if defined(STM32MP1xx)
+  /** Clock source selection is done by First Stage Boot Loader on Cortex A
+   *  See variant.cpp for corresponding boards.
+   */
+  if (!IS_ENGINEERING_BOOT_MODE()) {
+    return;
+  }
+#endif /* STM32MP1xx */
+
   enableBackupDomain();
 
   switch (source) {
@@ -118,7 +137,11 @@ void enableClock(sourceClock_t source)
       if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) {
         RCC_OscInitStruct.OscillatorType =  RCC_OSCILLATORTYPE_HSI;
         RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+#if defined(STM32MP1xx)
+        RCC_OscInitStruct.HSICalibrationValue = 0x00;
+#else
         RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+#endif
       }
       break;
     case LSE_CLOCK:

cores/arduino/stm32/interrupt.cpp

@@ -69,6 +69,23 @@ static gpio_irq_conf_str gpio_irq_conf[NB_EXTI] = {
   {.irqnb = EXTI4_15_IRQn,  .callback = NULL}, //GPIO_PIN_13
   {.irqnb = EXTI4_15_IRQn,  .callback = NULL}, //GPIO_PIN_14
   {.irqnb = EXTI4_15_IRQn,  .callback = NULL}  //GPIO_PIN_15
+#elif defined (STM32MP1xx)
+  {.irqnb = EXTI0_IRQn,     .callback = NULL}, //GPIO_PIN_0
+  {.irqnb = EXTI1_IRQn,     .callback = NULL}, //GPIO_PIN_1
+  {.irqnb = EXTI2_IRQn,     .callback = NULL}, //GPIO_PIN_2
+  {.irqnb = EXTI3_IRQn,     .callback = NULL}, //GPIO_PIN_3
+  {.irqnb = EXTI4_IRQn,     .callback = NULL}, //GPIO_PIN_4
+  {.irqnb = EXTI5_IRQn,     .callback = NULL}, //GPIO_PIN_5
+  {.irqnb = EXTI6_IRQn,     .callback = NULL}, //GPIO_PIN_6
+  {.irqnb = EXTI7_IRQn,     .callback = NULL}, //GPIO_PIN_7
+  {.irqnb = EXTI8_IRQn,     .callback = NULL}, //GPIO_PIN_8
+  {.irqnb = EXTI9_IRQn,     .callback = NULL}, //GPIO_PIN_9
+  {.irqnb = EXTI10_IRQn,    .callback = NULL}, //GPIO_PIN_10
+  {.irqnb = EXTI11_IRQn,    .callback = NULL}, //GPIO_PIN_11
+  {.irqnb = EXTI12_IRQn,    .callback = NULL}, //GPIO_PIN_12
+  {.irqnb = EXTI13_IRQn,    .callback = NULL}, //GPIO_PIN_13
+  {.irqnb = EXTI14_IRQn,    .callback = NULL}, //GPIO_PIN_14
+  {.irqnb = EXTI15_IRQn,    .callback = NULL}  //GPIO_PIN_15
 #else
   {.irqnb = EXTI0_IRQn,     .callback = NULL}, //GPIO_PIN_0
   {.irqnb = EXTI1_IRQn,     .callback = NULL}, //GPIO_PIN_1

cores/arduino/stm32/low_power.c

@@ -63,7 +63,7 @@ static void (*WakeUpUartCb)(void) = NULL;
   */
 void LowPower_init()
 {
-#if !defined(STM32H7xx) && ! defined(STM32WBxx)
+#if !defined(STM32H7xx) && !defined(STM32MP1xx) && !defined(STM32WBxx)
   /* Enable Power Clock */
   __HAL_RCC_PWR_CLK_ENABLE();
 #endif

cores/arduino/stm32/rtc.c

@@ -39,6 +39,15 @@
 #include "rtc.h"
 
 #ifdef HAL_RTC_MODULE_ENABLED
+#if defined(STM32MP1xx)
+/**
+ * Currently there is no RTC driver for STM32MP1xx. If RTC is used in the future
+ * the function call HAL_RCCEx_PeriphCLKConfig() shall be done under
+ * if(IS_ENGINEERING_BOOT_MODE()), since clock source selection is done by
+ * First Stage Boot Loader on Cortex-A.
+ */
+#error "RTC shall not be handled by Arduino in STM32MP1xx."
+#endif /* STM32MP1xx */
 
 #ifdef __cplusplus
 extern "C" {

cores/arduino/stm32/spi_com.c

@@ -60,6 +60,29 @@ uint32_t spi_getClkFreqInst(SPI_TypeDef *spi_inst)
   UNUSED(spi_inst);
   /* SPIx source CLK is PCKL1 */
   spi_freq = HAL_RCC_GetPCLK1Freq();
+#elif defined(STM32MP1xx)
+  /* Get source clock depending on SPI instance */
+  if (spi_inst != NP) {
+    switch ((uint32_t)spi_inst) {
+      case (uint32_t)SPI1:
+        spi_freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI1);
+        break;
+      case (uint32_t)SPI2:
+      case (uint32_t)SPI3:
+        spi_freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI23);
+        break;
+      case (uint32_t)SPI4:
+      case (uint32_t)SPI5:
+        spi_freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI45);
+        break;
+      case (uint32_t)SPI6:
+        spi_freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI6);
+        break;
+      default:
+        core_debug("CLK: SPI instance not set");
+        break;
+    }
+  }
 #else
   if (spi_inst != NP) {
     /* Get source clock depending on SPI instance */
@@ -223,7 +246,7 @@ void spi_init(spi_t *obj, uint32_t speed, spi_mode_e mode, uint8_t msb)
   handle->Init.TIMode            = SPI_TIMODE_DISABLE;
 #if defined(STM32F0xx) || defined(STM32F3xx) || defined(STM32F7xx) ||\
     defined(STM32G0xx) || defined(STM32H7xx) || defined(STM32L4xx) ||\
-    defined(STM32WBxx)
+    defined(STM32WBxx) || defined(STM32MP1xx)
   handle->Init.NSSPMode          = SPI_NSS_PULSE_DISABLE;
 #endif
 

cores/arduino/stm32/stm32yyxx_hal_conf.h

@@ -89,6 +89,7 @@
  */
 /*#define HAL_UART_MODULE_ENABLED*/
 /*#define HAL_PCD_MODULE_ENABLED*/
+/*#define HAL_IPCC_MODULE_ENABLED*/
 
 /*
  * Unused HAL modules

cores/arduino/stm32/timer.h

@@ -53,7 +53,7 @@ extern "C" {
 #elif defined(STM32F2xx) || defined(STM32F4xx) || defined(STM32F7xx)
 #define TIM1_IRQn TIM1_UP_TIM10_IRQn
 #define TIM1_IRQHandler TIM1_UP_TIM10_IRQHandler
-#elif defined(STM32H7xx)
+#elif defined(STM32H7xx) || defined(STM32MP1xx)
 #define TIM1_IRQn TIM1_UP_IRQn
 #define TIM1_IRQHandler TIM1_UP_IRQHandler
 #endif
@@ -63,7 +63,7 @@ extern "C" {
 #if defined(STM32G0xx)
 #define TIM6_IRQn TIM6_DAC_LPTIM1_IRQn
 #define TIM6_IRQHandler TIM6_DAC_LPTIM1_IRQHandler
-#elif !defined(STM32F1xx) && !defined(STM32L1xx)
+#elif !defined(STM32F1xx) && !defined(STM32L1xx) && !defined(STM32MP1xx)
 #define TIM6_IRQn TIM6_DAC_IRQn
 #define TIM6_IRQHandler TIM6_DAC_IRQHandler
 #endif
@@ -84,7 +84,7 @@ extern "C" {
  || defined(STM32H7xx)
 #define TIM8_IRQn TIM8_UP_TIM13_IRQn
 #define TIM8_IRQHandler TIM8_UP_TIM13_IRQHandler
-#elif  defined(STM32F3xx) || defined(STM32G4xx) || defined(STM32L4xx)
+#elif  defined(STM32F3xx) || defined(STM32G4xx) || defined(STM32L4xx) || defined(STM32MP1xx)
 #define TIM8_IRQn TIM8_UP_IRQn
 #define TIM8_IRQHandler TIM8_UP_IRQHandler
 #endif