Change RemRam section to "3D printer board" section

Author: hasenbanck

Diff for: boards.txt

@@ -640,44 +640,44 @@ RAK.menu.upload_method.STLink.upload.protocol=STLink
 RAK.menu.upload_method.STLink.upload.tool=stlink_upload
 
 ###############################
-# RemRam
+# 3D printer boards
 
-RemRam.name=RemRam series
+3dprinter.name=3D printer boards
 
-RemRam.build.vid=0x0483
-RemRam.build.pid=0x5711
-RemRam.vid.0=0x0483
-RemRam.pid.0=0x5711
+3dprinter.build.vid=0x0483
+3dprinter.build.pid=0x5711
+3dprinter.vid.0=0x0483
+3dprinter.pid.0=0x5711
 
-RemRam.build.core=arduino
-RemRam.build.board=RemRam
-RemRam.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}
+3dprinter.build.core=arduino
+3dprinter.build.board=RemRam
+3dprinter.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}
 
 # REMRAM_V1 board
 # Support: Serial1 (USART1 on PA10, PA9)
-RemRam.menu.pnum.REMRAM_V1=RemRam v1
-RemRam.menu.pnum.REMRAM_V1.upload.maximum_size=2097152
-RemRam.menu.pnum.REMRAM_V1.upload.maximum_data_size=524288
-RemRam.menu.pnum.REMRAM_V1.build.mcu=cortex-m7 -mfpu=fpv4-sp-d16 -mfloat-abi=hard
-RemRam.menu.pnum.REMRAM_V1.build.board=REMRAM_V1
-RemRam.menu.pnum.REMRAM_V1.build.series=STM32F7xx
-RemRam.menu.pnum.REMRAM_V1.build.product_line=STM32F765xx
-RemRam.menu.pnum.REMRAM_V1.build.variant=REMRAM_V1
-RemRam.menu.pnum.REMRAM_V1.build.cmsis_lib_gcc=arm_cortexM7l_math
+3dprinter.menu.pnum.REMRAM_V1=RemRam v1
+3dprinter.menu.pnum.REMRAM_V1.upload.maximum_size=2097152
+3dprinter.menu.pnum.REMRAM_V1.upload.maximum_data_size=524288
+3dprinter.menu.pnum.REMRAM_V1.build.mcu=cortex-m7 -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+3dprinter.menu.pnum.REMRAM_V1.build.board=REMRAM_V1
+3dprinter.menu.pnum.REMRAM_V1.build.series=STM32F7xx
+3dprinter.menu.pnum.REMRAM_V1.build.product_line=STM32F765xx
+3dprinter.menu.pnum.REMRAM_V1.build.variant=REMRAM_V1
+3dprinter.menu.pnum.REMRAM_V1.build.cmsis_lib_gcc=arm_cortexM7l_math
 
 # Virtual COM port
-#RemRam.menu.usb.none=None
-#RemRam.menu.usb.CDC=CDC
-#RemRam.menu.usb.CDC.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC -DUSE_USB_FS
+#3dprinter.menu.usb.none=None
+#3dprinter.menu.usb.CDC=CDC
+#3dprinter.menu.usb.CDC.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC -DUSE_USB_FS
 
 # Upload menu
-RemRam.menu.upload_method.STLinkMethod=STLink
-RemRam.menu.upload_method.STLinkMethod.upload.protocol=STLink
-RemRam.menu.upload_method.STLinkMethod.upload.tool=stlink_upload
+3dprinter.menu.upload_method.STLinkMethod=STLink
+3dprinter.menu.upload_method.STLinkMethod.upload.protocol=STLink
+3dprinter.menu.upload_method.STLinkMethod.upload.tool=stlink_upload
 
-RemRam.menu.upload_method.serialMethod=Serial
-RemRam.menu.upload_method.serialMethod.upload.protocol=maple_serial
-RemRam.menu.upload_method.serialMethod.upload.tool=serial_upload
+3dprinter.menu.upload_method.serialMethod=Serial
+3dprinter.menu.upload_method.serialMethod.upload.protocol=maple_serial
+3dprinter.menu.upload_method.serialMethod.upload.tool=serial_upload
 
 ################################################################################
 # Serialx activation
@@ -729,11 +729,11 @@ RAK.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
 RAK.menu.xserial.disabled=Disabled (No Serial)
 RAK.menu.xserial.disabled.build.xSerial=
 
-RemRam.menu.xserial.generic=Enabled with generic Serial
-RemRam.menu.xserial.none=Enabled without generic Serial
-RemRam.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
-RemRam.menu.xserial.disabled=Disabled (No Serial)
-RemRam.menu.xserial.disabled.build.xSerial=
+3dprinter.menu.xserial.generic=Enabled with generic Serial
+3dprinter.menu.xserial.none=Enabled without generic Serial
+3dprinter.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
+3dprinter.menu.xserial.disabled=Disabled (No Serial)
+3dprinter.menu.xserial.disabled.build.xSerial=
 
 # USB connectivity
 Nucleo_144.menu.usb.none=None
@@ -906,23 +906,23 @@ RAK.menu.opt.o3lto.build.flags.optimize=-O3 -flto
 RAK.menu.opt.ogstd=Debug (-g)
 RAK.menu.opt.ogstd.build.flags.optimize=-g -Og
 
-RemRam.menu.opt.osstd=Smallest (-Os default)
-RemRam.menu.opt.oslto=Smallest (-Os) with LTO
-RemRam.menu.opt.oslto.build.flags.optimize=-Os -flto
-RemRam.menu.opt.o1std=Fast (-O1)
-RemRam.menu.opt.o1std.build.flags.optimize=-O1
-RemRam.menu.opt.o1lto=Fast (-O1) with LTO
-RemRam.menu.opt.o1lto.build.flags.optimize=-O1 -flto
-RemRam.menu.opt.o2std=Faster (-O2)
-RemRam.menu.opt.o2std.build.flags.optimize=-O2
-RemRam.menu.opt.o2lto=Faster (-O2) with LTO
-RemRam.menu.opt.o2lto.build.flags.optimize=-O2 -flto
-RemRam.menu.opt.o3std=Fastest (-O3)
-RemRam.menu.opt.o3std.build.flags.optimize=-O3
-RemRam.menu.opt.o3lto=Fastest (-O3) with LTO
-RemRam.menu.opt.o3lto.build.flags.optimize=-O3 -flto
-RemRam.menu.opt.ogstd=Debug (-g)
-RemRam.menu.opt.ogstd.build.flags.optimize=-g -Og
+3dprinter.menu.opt.osstd=Smallest (-Os default)
+3dprinter.menu.opt.oslto=Smallest (-Os) with LTO
+3dprinter.menu.opt.oslto.build.flags.optimize=-Os -flto
+3dprinter.menu.opt.o1std=Fast (-O1)
+3dprinter.menu.opt.o1std.build.flags.optimize=-O1
+3dprinter.menu.opt.o1lto=Fast (-O1) with LTO
+3dprinter.menu.opt.o1lto.build.flags.optimize=-O1 -flto
+3dprinter.menu.opt.o2std=Faster (-O2)
+3dprinter.menu.opt.o2std.build.flags.optimize=-O2
+3dprinter.menu.opt.o2lto=Faster (-O2) with LTO
+3dprinter.menu.opt.o2lto.build.flags.optimize=-O2 -flto
+3dprinter.menu.opt.o3std=Fastest (-O3)
+3dprinter.menu.opt.o3std.build.flags.optimize=-O3
+3dprinter.menu.opt.o3lto=Fastest (-O3) with LTO
+3dprinter.menu.opt.o3lto.build.flags.optimize=-O3 -flto
+3dprinter.menu.opt.ogstd=Debug (-g)
+3dprinter.menu.opt.ogstd.build.flags.optimize=-g -Og
 
 # C Runtime Library
 Nucleo_144.menu.rtlib.nano=Newlib Nano (default)
@@ -1005,12 +1005,12 @@ RAK.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -
 RAK.menu.rtlib.full=Newlib Standard
 RAK.menu.rtlib.full.build.flags.ldspecs=
 
-RemRam.menu.rtlib.nano=Newlib Nano (default)
-RemRam.menu.rtlib.nanofp=Newlib Nano + Float Printf
-RemRam.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
-RemRam.menu.rtlib.nanofs=Newlib Nano + Float Scanf
-RemRam.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
-RemRam.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
-RemRam.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
-RemRam.menu.rtlib.full=Newlib Standard
-RemRam.menu.rtlib.full.build.flags.ldspecs=
+3dprinter.menu.rtlib.nano=Newlib Nano (default)
+3dprinter.menu.rtlib.nanofp=Newlib Nano + Float Printf
+3dprinter.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
+3dprinter.menu.rtlib.nanofs=Newlib Nano + Float Scanf
+3dprinter.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
+3dprinter.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
+3dprinter.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
+3dprinter.menu.rtlib.full=Newlib Standard
+3dprinter.menu.rtlib.full.build.flags.ldspecs=