fix(Nucleo_F401RE): use HSI intead of HSE bypass

HSE Bypass is available only on MB1136 C-02 (or higher).
MB1136 C-01 configured as HSE not used so old clock config
does not work for it. Using HSI allows to be compatible
with all MB1136 C-0x version.

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

Diff for: variants/STM32F4xx/F401R(B-C-D-E)T/variant_NUCLEO_F401RE.cpp

@@ -115,12 +115,13 @@ WEAK void SystemClock_Config(void)
   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
 
   /* Initializes the CPU, AHB and APB busses clocks */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
   RCC_OscInitStruct.PLL.PLLM = 8;
-  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLN = 168;
   RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
   RCC_OscInitStruct.PLL.PLLQ = 7;