chore(f7): use HSE bypass for Nucleo-F767ZI

instead of HSI.

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

Diff for: variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/variant_NUCLEO_F767ZI.cpp

@@ -171,23 +171,6 @@ extern "C" {
 
 /**
   * @brief  System Clock Configuration
-  *         The system Clock is configured as follow :
-  *            System Clock source            = PLL (HSI)
-  *            SYSCLK(Hz)                     = 216000000
-  *            HCLK(Hz)                       = 216000000
-  *            AHB Prescaler                  = 1
-  *            APB1 Prescaler                 = 4
-  *            APB2 Prescaler                 = 2
-  *            HSE Frequency(Hz)              = 16000000
-  *            PLL_M                          = 8
-  *            PLL_N                          = 216
-  *            PLL_P                          = 2
-  *            PLL_Q                          = 9
-  *            PLLSAI_N                       = 192
-  *            PLLSAI_P                       = 2
-  *            VDD(V)                         = 3.3
-  *            Main regulator output voltage  = Scale1 mode
-  *            Flash Latency(WS)              = 7
   * @param  None
   * @retval None
   */
@@ -203,12 +186,12 @@ WEAK void SystemClock_Config(void)
   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
 
   /* Initializes the CPU, AHB and APB busses clocks */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
-  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
   RCC_OscInitStruct.HSICalibrationValue = 16;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
   RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
-  RCC_OscInitStruct.PLL.PLLM = 8;
+  RCC_OscInitStruct.PLL.PLLM = 4;
   RCC_OscInitStruct.PLL.PLLN = 216;
   RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
   RCC_OscInitStruct.PLL.PLLQ = 9;