pins_arduino.h

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>

#define USB_VID 0x303A
#define USB_PID 0x81B8
#define USB_MANUFACTURER "senseBox"
#define USB_PRODUCT "MCU-S2 ESP32S2"
#define USB_SERIAL "" // Empty string for MAC adddress

// Default USB FirmwareMSC Settings
#define USB_FW_MSC_VENDOR_ID "senseBox"        // max 8 chars
#define USB_FW_MSC_PRODUCT_ID "MCU-S2 ESP32S2" // max 16 chars
#define USB_FW_MSC_PRODUCT_REVISION "1.00"     // max 4 chars
#define USB_FW_MSC_VOLUME_NAME "senseBox"      // max 11 chars
#define USB_FW_MSC_SERIAL_NUMBER 0x00000000

#define PIN_NEOPIXEL 1 // NeoPixel LED
#define NEOPIXEL_PIN 1 // NeoPixel LED
#define NEOPIXEL_NUM 1 // number of neopixels

// Default I2C QWIIC-Ports
static const uint8_t SDA = 39;
static const uint8_t SCL = 40;
#define PIN_QWIIC_SDA      39
#define PIN_QWIIC_SCL      40

// Secondary I2C MPU6050
#define WIRE1_PIN_DEFINED 1 // See Wire.cpp at bool TwoWire::initPins(int sdaPin, int sclPin)
static const uint8_t SCL1 = 42;
static const uint8_t SDA1 = 45;
#define PIN_I2C_SCL         42
#define PIN_I2C_SDA         45
#define PIN_I2C_INT         46

// SPI
static const uint8_t SS   = 42;
static const uint8_t MOSI = 35;
static const uint8_t SCK  = 36;
static const uint8_t MISO = 37;

// XBEE Pins 
#define PIN_XBEE_ENABLE    41
#define PIN_XBEE_INT       33
#define PIN_XBEE_CS        34
#define PIN_XBEE_MOSI      35
#define PIN_XBEE_SCLK      36
#define PIN_XBEE_MISO      37
#define PIN_XBEE_RESET     38
#define PIN_XBEE_TXD       17
#define PIN_XBEE_RXD       18

// Alias XB1
#define PIN_XB1_ENABLE     41
#define PIN_XB1_INT        33
#define PIN_XB1_CS         34
#define PIN_XB1_MOSI       35
#define PIN_XB1_SCLK       36
#define PIN_XB1_MISO       37
#define PIN_XB1_RESET      38
#define PIN_XB1_TXD        17
#define PIN_XB1_RXD        18

// IO Pins
#define PIN_LED     1
#define PIN_IO2     2
#define PIN_IO3     3
#define PIN_IO4     4
#define PIN_IO5     5
#define PIN_IO6     6
#define PIN_IO7     7
#define IO_ENABLE   8

static const uint8_t A2 = PIN_IO2;
static const uint8_t A3 = PIN_IO3;
static const uint8_t A4 = PIN_IO4;
static const uint8_t A5 = PIN_IO5;
static const uint8_t A6 = PIN_IO6;
static const uint8_t A7 = PIN_IO7;

static const uint8_t D2 = PIN_IO2;
static const uint8_t D3 = PIN_IO3;
static const uint8_t D4 = PIN_IO4;
static const uint8_t D5 = PIN_IO5;
static const uint8_t D6 = PIN_IO6;
static const uint8_t D7 = PIN_IO7;

// UART Port
static const uint8_t TX = 43;
static const uint8_t RX = 44;
#define PIN_UART_TXD      43
#define PIN_UART_RXD      44  
#define PIN_UART_ENABLE   26

// UART XBee
static const uint8_t TX1 = 17;
static const uint8_t RX1 = 18;

// PD-Sensor
#define PD_SENSE       14
#define PD_ENABLE      21
#define PIN_PD_ENABLE  21

// SD-Card
#define VSPI_MISO   13
#define VSPI_MOSI   11
#define VSPI_SCLK   12
#define VSPI_SS     10
#define SD_ENABLE    9

#define PIN_SD_ENABLE      9
#define PIN_SD_CS         10
#define PIN_SD_MOSI       11
#define PIN_SD_SCLK       12
#define PIN_SD_MISO       13

// USB
#define PIN_USB_DM        19
#define PIN_USB_DP        20

// Touch Pins
static const uint8_t T2 = PIN_IO2;
static const uint8_t T3 = PIN_IO3;
static const uint8_t T4 = PIN_IO4;
static const uint8_t T5 = PIN_IO5;
static const uint8_t T6 = PIN_IO6;
static const uint8_t T7 = PIN_IO7;


static const uint8_t DAC1 = 17;
static const uint8_t DAC2 = 18;

// Alias Serial to SerialUSB
#define Serial SerialUSB

#endif /* Pins_Arduino_h */