---

yaml
---
r: 142993
b: refs/heads/try2
c: e39ea2a
h: refs/heads/master
i:
  142991: a2dfae6
v: v3

Author: catamorphism

[refs]

@@ -5,7 +5,7 @@ refs/heads/snap-stage3: 78a7676898d9f80ab540c6df5d4c9ce35bb50463
 refs/heads/try: 519addf6277dbafccbb4159db4b710c37eaa2ec5
 refs/tags/release-0.1: 1f5c5126e96c79d22cb7862f75304136e204f105
 refs/heads/ndm: f3868061cd7988080c30d6d5bf352a5a5fe2460b
-refs/heads/try2: 098709aa638bb29998b5e6f2700997b13c2c6712
+refs/heads/try2: e39ea2a5c880b252abbf37dade7a9b7ce7b2cb40
 refs/heads/dist-snap: ba4081a5a8573875fed17545846f6f6902c8ba8d
 refs/tags/release-0.2: c870d2dffb391e14efb05aa27898f1f6333a9596
 refs/tags/release-0.3: b5f0d0f648d9a6153664837026ba1be43d3e2503

branches/try2/Makefile.in

@@ -249,7 +249,7 @@ endef
 
 # Same interface as above, but deletes rather than just listing the files.
 define REMOVE_ALL_OLD_GLOB_MATCHES_EXCEPT
-  $(Q)MATCHES="$(filter-out %$(3),$(wildcard $(1)/$(2)))"; if [ -n "$$MATCHES" ] ; then echo "Warning: removing previous" \'$(2)\' "libraries:" $$MATCHES; rm $$MATCHES ; fi
+  $(Q)MATCHES="$(filter-out %$(3),$(wildcard $(1)/$(2)))"; if [ -n "$$MATCHES" ] ; then echo "Warning: removing previous" \'$(2)\' "libraries:" $$MATCHES; rm -v $$MATCHES ; fi
 endef
 
 # We use a different strategy for LIST_ALL_OLD_GLOB_MATCHES_EXCEPT

branches/try2/README.md

@@ -3,72 +3,18 @@
 This is a compiler for Rust, including standard libraries, tools and
 documentation.
 
-## Quick Start
 
-### Windows
+## Installation
 
-1. Download and use the [installer][win-exe].
-2. Read the [tutorial].
-2. Enjoy!
+The Rust compiler currently must be built from a [tarball], unless you
+are on Windows, in which case using the [installer][win-exe] is
+recommended.
 
-> ***Note:*** Windows users should read the detailed
-> [getting started][wiki-start] notes on the wiki. Even when using
-> the binary installer the Windows build requires a MinGW installation,
-> the precise details of which are not discussed here.
-
-[tutorial]: http://static.rust-lang.org/doc/tutorial.html
-[wiki-start]: https://github.com/mozilla/rust/wiki/Note-getting-started-developing-Rust
-[win-exe]: http://static.rust-lang.org/dist/rust-0.7-install.exe
-
-### Linux / OS X
-
-1. Install the prerequisites (if not already installed)
-    * g++ 4.4 or clang++ 3.x
-    * python 2.6 or later (but not 3.x)
-    * perl 5.0 or later
-    * gnu make 3.81 or later
-    * curl
-2. Download and build Rust
-    You can either download a [tarball] or build directly from the [repo].
-    
-    To build from the [tarball] do:
-    
-        $ curl -O http://static.rust-lang.org/dist/rust-0.7.tar.gz
-        $ tar -xzf rust-0.7.tar.gz
-        $ cd rust-0.7
-    
-    Or to build from the [repo] do:
-
-        $ git clone https://github.com/mozilla/rust.git
-        $ cd rust
-
-    Now that you have Rust's source code, you can configure and build it:
-    
-        $ ./configure
-        $ make && make install
-    
-    You may need to use `sudo make install` if you do not normally have
-    permission to modify the destination directory. The install locations can
-    be adjusted by passing a `--prefix` argument to `configure`. Various other
-    options are also supported, pass `--help` for more information on them.
-
-    When complete, `make install` will place several programs into
-    `/usr/local/bin`: `rustc`, the Rust compiler; `rustdoc`, the
-    API-documentation tool, and `rustpkg`, the Rust package manager and build
-    system.
-3. Read the [tutorial].
-4. Enjoy!
-
-[repo]: https://github.com/mozilla/rust
-[tarball]: http://static.rust-lang.org/dist/rust-0.7.tar.gz
-[tutorial]: http://static.rust-lang.org/doc/tutorial.html
-
-## Notes
-
-Since the Rust compiler is written in Rust, it must be built by a
-precompiled "snapshot" version of itself (made in an earlier state of
-development). As such, source builds require a connection to the Internet, to
-fetch snapshots, and an OS that can execute the available snapshot binaries.
+Since the Rust compiler is written in Rust, it must be built by
+a precompiled "snapshot" version of itself (made in an earlier state
+of development). As such, source builds require a connection to
+the Internet, to fetch snapshots, and an OS that can execute the
+available snapshot binaries.
 
 Snapshot binaries are currently built and tested on several platforms:
 
@@ -79,12 +25,42 @@ Snapshot binaries are currently built and tested on several platforms:
 You may find that other platforms work, but these are our "tier 1"
 supported build environments that are most likely to work.
 
-Rust currently needs about 1.8G of RAM to build without swapping; if it hits
-swap, it will take a very long time to build.
+> ***Note:*** Windows users should read the detailed
+> [getting started][wiki-start] notes on the wiki. Even when using
+> the binary installer the Windows build requires a MinGW installation,
+> the precise details of which are not discussed here.
+
+To build from source you will also need the following prerequisite
+packages:
+
+* g++ 4.4 or clang++ 3.x
+* python 2.6 or later (but not 3.x)
+* perl 5.0 or later
+* gnu make 3.81 or later
+* curl
+
+Assuming you're on a relatively modern *nix system and have met the
+prerequisites, something along these lines should work.
+
+    $ curl -O http://static.rust-lang.org/dist/rust-0.7.tar.gz
+    $ tar -xzf rust-0.7.tar.gz
+    $ cd rust-0.7
+    $ ./configure
+    $ make && make install
 
-There is lots more documentation in the [wiki].
+You may need to use `sudo make install` if you do not normally have
+permission to modify the destination directory. The install locations
+can be adjusted by passing a `--prefix` argument to
+`configure`. Various other options are also supported, pass `--help`
+for more information on them.
 
-[wiki]: https://github.com/mozilla/rust/wiki
+When complete, `make install` will place several programs into
+`/usr/local/bin`: `rustc`, the Rust compiler; `rustdoc`, the
+API-documentation tool, and `rustpkg`, the Rust package manager and build system.
+
+[wiki-start]: https://github.com/mozilla/rust/wiki/Note-getting-started-developing-Rust
+[tarball]: http://static.rust-lang.org/dist/rust-0.7.tar.gz
+[win-exe]: http://static.rust-lang.org/dist/rust-0.7-install.exe
 
 
 ## License
@@ -95,3 +71,8 @@ BSD-like licenses.
 
 See LICENSE-APACHE, LICENSE-MIT, and COPYRIGHT for details.
 
+## More help
+
+The [tutorial] is a good starting point.
+
+[tutorial]: http://static.rust-lang.org/doc/tutorial.html

branches/try2/configure

@@ -750,18 +750,18 @@ then
     cd ${CFG_SRC_DIR}
 
     msg "git: submodule sync"
-    "${CFG_GIT}" submodule sync
+    "${CFG_GIT}" submodule --quiet sync
 
     msg "git: submodule update"
-    "${CFG_GIT}" submodule update --init
+    "${CFG_GIT}" submodule --quiet update --init
     need_ok "git failed"
 
     msg "git: submodule foreach sync"
-    "${CFG_GIT}" submodule foreach --recursive 'if test -e .gitmodules; then git submodule sync; fi'
+    "${CFG_GIT}" submodule --quiet foreach --recursive 'if test -e .gitmodules; then git submodule sync; fi'
     need_ok "git failed"
 
     msg "git: submodule foreach update"
-    "${CFG_GIT}" submodule update --init --recursive
+    "${CFG_GIT}" submodule --quiet update --init --recursive
     need_ok "git failed"
 
     # NB: this is just for the sake of getting the submodule SHA1 values
@@ -770,9 +770,9 @@ then
     "${CFG_GIT}" submodule status --recursive
 
     msg "git: submodule clobber"
-    "${CFG_GIT}" submodule foreach --recursive git clean -dxf
+    "${CFG_GIT}" submodule --quiet foreach --recursive git clean -dxf
     need_ok "git failed"
-    "${CFG_GIT}" submodule foreach --recursive git checkout .
+    "${CFG_GIT}" submodule --quiet foreach --recursive git checkout .
     need_ok "git failed"
 
     cd ${CFG_BUILD_DIR}
@@ -921,6 +921,9 @@ do
         esac
         need_ok "LLVM configure failed"
 
+        # Hack the tools Makefile to turn off the clang build
+        sed -i 's/clang//g' tools/Makefile
+
         cd $CFG_BUILD_DIR
     fi
 

branches/try2/doc/rust.md

@@ -573,7 +573,8 @@ The top level of this tree is a module that is anonymous (from the point of view
 
 The Rust compiler is always invoked with a single source file as input, and always produces a single output crate.
 The processing of that source file may result in other source files being loaded as modules.
-Source files have the extension `.rs`.
+Source files typically have the extension `.rs` but, by convention,
+source files that represent crates have the extension `.rc`, called *crate files*.
 
 A Rust source file describes a module, the name and
 location of which -- in the module tree of the current crate -- are defined
@@ -3285,7 +3286,7 @@ As an example, to see all the logs generated by the compiler, you would set
 you would set it to `rustc::metadata::creader`. To see just error logging
 use `rustc=0`.
 
-Note that when compiling source files that don't specify a
+Note that when compiling either `.rs` or `.rc` files that don't specify a
 crate name the crate is given a default name that matches the source file,
 with the extension removed. In that case, to turn on logging for a program
 compiled from, e.g. `helloworld.rs`, `RUST_LOG` should be set to `helloworld`.