firmwares
Default configuration is used.
Available firmwares:
| Directory | Description |
|---|---|
| esp32 | MicroPython, single partition layout, 4MB Flash |
| esp32_ota | MicroPython, dual partition layout, OTA enabled, 4MB Flash |
| esp32_psram | MicroPython, single partition layout, 4MB Flash & 4MB SPIRAM |
| esp32_psram_ota | MicroPython, dual partition layout, OTA enabled, 4MB Flash & 4MB SPIRAM |
| esp32_all | MicroPython, single partition layout, 4MB Flash, ALL modules included |
| esp32_psram_all | MicroPython, single partition layout, 4MB Flash & 4MB SPIRAM, ALL modules included |
All firmwares are configured with 1 MB SPIFFS file system.
Telnet server, FTP server, mDNS and Mqtt are enabled.
To flash, use esptool.py.
You can use the flash.sh script, run it in its directory.
Edit the flash.sh and set the correct usb port for your board.
[MicroPython_LoBo_esp32](https://github.com/loboris/MicroPython_ESP32_psRAM_LoBo/raw/master/MicroPython_BUILD/firmware/MicroPython_LoBo_esp32.zip)
