pins_arduino.h

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>
#include "soc/soc_caps.h"

#define USB_VID 0x1a86
#define USB_PID 0x7523

// Some boards have too low voltage on this pin (board design bug)
// Use different pin with 3V and connect with 48
// and change this setup for the chosen pin (for example 38)
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + 48;
#define BUILTIN_LED    LED_BUILTIN  // backward compatibility
#define LED_BUILTIN    LED_BUILTIN
#define RGB_BUILTIN    LED_BUILTIN
#define RGB_BRIGHTNESS 64

static const uint8_t TX = 37;
static const uint8_t RX = 40;

static const uint8_t TXD2 = 17;
static const uint8_t RXD2 = 18;

static const uint8_t SDA = 19;
static const uint8_t SCL = 20;

static const uint8_t SS = 10;
static const uint8_t MOSI = 11;
static const uint8_t MISO = 13;
static const uint8_t SCK = 12;

static const uint8_t G0 = 0;
static const uint8_t G1 = 1;
static const uint8_t G2 = 2;
static const uint8_t G3 = 3;
static const uint8_t G4 = 4;
static const uint8_t G5 = 5;
static const uint8_t G6 = 6;
static const uint8_t G7 = 7;
static const uint8_t G8 = 8;
static const uint8_t G9 = 9;
static const uint8_t G11 = 11;
static const uint8_t G12 = 12;
static const uint8_t G13 = 13;
static const uint8_t G14 = 14;
static const uint8_t G17 = 17;
static const uint8_t G18 = 18;
static const uint8_t G19 = 19;
static const uint8_t G20 = 20;
static const uint8_t G21 = 21;
static const uint8_t G33 = 33;
static const uint8_t G34 = 34;
static const uint8_t G35 = 35;
static const uint8_t G36 = 36;
static const uint8_t G37 = 37;
static const uint8_t G38 = 38;
static const uint8_t G45 = 45;
static const uint8_t G46 = 46;
static const uint8_t G47 = 47;
static const uint8_t G48 = 48;

static const uint8_t ADC = 38;

#endif /* Pins_Arduino_h */