lib.rs

//! Provides the wrapper type `Volatile`, which wraps a reference to any copy-able type and allows
//! for volatile memory access to wrapped value. Volatile memory accesses are never optimized away
//! by the compiler, and are useful in many low-level systems programming and concurrent contexts.
//!
//! The wrapper types *do not* enforce any atomicity guarantees; to also get atomicity, consider
//! looking at the `Atomic` wrapper types found in `libcore` or `libstd`.

#![no_std]
#![cfg_attr(feature = "unstable", feature(core_intrinsics))]
#![cfg_attr(feature = "unstable", feature(slice_range))]
#![cfg_attr(feature = "unstable", allow(incomplete_features))]
#![cfg_attr(all(feature = "unstable", test), feature(slice_as_chunks))]
#![warn(missing_docs)]

use access::{ReadOnly, ReadWrite, Readable, Writable, WriteOnly};
use core::{
    fmt,
    marker::PhantomData,
    ops::Deref,
    ops::{DerefMut, Index, IndexMut},
    ptr,
    slice::SliceIndex,
};
#[cfg(feature = "unstable")]
use core::{
    intrinsics,
    ops::{Range, RangeBounds},
    slice::range,
};

/// Allows creating read-only and write-only `Volatile` values.
pub mod access;

/// Wraps a reference to make accesses to the referenced value volatile.
///
/// Allows volatile reads and writes on the referenced value. The referenced value needs to
/// be `Copy` for reading and writing, as volatile reads and writes take and return copies
/// of the value.
///
/// Since not all volatile resources (e.g. memory mapped device registers) are both readable
/// and writable, this type supports limiting the allowed access types through an optional second
/// generic parameter `A` that can be one of `ReadWrite`, `ReadOnly`, or `WriteOnly`. It defaults
/// to `ReadWrite`, which allows all operations.
///
/// The size of this struct is the same as the size of the contained reference.
#[derive(Clone)]
#[repr(transparent)]
pub struct Volatile<R, A = ReadWrite> {
    reference: R,
    access: PhantomData<A>,
}

/// Constructor functions for creating new values
///
/// These functions allow to construct a new `Volatile` instance from a reference type. While
/// the `new` function creates a `Volatile` instance with unrestricted access, there are also
/// functions for creating read-only or write-only instances.
impl<R> Volatile<R> {
    /// Constructs a new volatile instance wrapping the given reference.
    ///
    /// While it is possible to construct `Volatile` instances from arbitrary values (including
    /// non-reference values), most of the methods are only available when the wrapped type is
    /// a reference. The only reason that we don't forbid non-reference types in the constructor
    /// functions is that the Rust compiler does not support trait bounds on generic `const`
    /// functions yet. When this becomes possible, we will release a new version of this library
    /// with removed support for non-references. For these reasons it is recommended to use
    /// the `Volatile` type only with references.
    ///
    /// ## Example
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let mut value = 0u32;
    ///
    /// let mut volatile = Volatile::new(&mut value);
    /// volatile.write(1);
    /// assert_eq!(volatile.read(), 1);
    /// ```
    pub const fn new(reference: R) -> Volatile<R> {
        Volatile {
            reference,
            access: PhantomData,
        }
    }

    /// Constructs a new read-only volatile instance wrapping the given reference.
    ///
    /// This is equivalent to the `new` function with the difference that the returned
    /// `Volatile` instance does not permit write operations. This is for example useful
    /// with memory-mapped hardware registers that are defined as read-only by the hardware.
    ///
    /// ## Example
    ///
    /// Reading is allowed:
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let value = 0u32;
    ///
    /// let volatile = Volatile::new_read_only(&value);
    /// assert_eq!(volatile.read(), 0);
    /// ```
    ///
    /// But writing is not:
    ///
    /// ```compile_fail
    /// use volatile::Volatile;
    ///
    /// let mut value = 0u32;
    ///
    /// let mut volatile = Volatile::new_read_only(&mut value);
    /// volatile.write(1);
    /// //ERROR: ^^^^^ the trait `volatile::access::Writable` is not implemented
    /// //             for `volatile::access::ReadOnly`
    /// ```
    pub const fn new_read_only(reference: R) -> Volatile<R, ReadOnly> {
        Volatile {
            reference,
            access: PhantomData,
        }
    }

    /// Constructs a new write-only volatile instance wrapping the given reference.
    ///
    /// This is equivalent to the `new` function with the difference that the returned
    /// `Volatile` instance does not permit read operations. This is for example useful
    /// with memory-mapped hardware registers that are defined as write-only by the hardware.
    ///
    /// ## Example
    ///
    /// Writing is allowed:
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let mut value = 0u32;
    ///
    /// let mut volatile = Volatile::new_write_only(&mut value);
    /// volatile.write(1);
    /// ```
    ///
    /// But reading is not:
    ///
    /// ```compile_fail
    /// use volatile::Volatile;
    ///
    /// let value = 0u32;
    ///
    /// let volatile = Volatile::new_write_only(&value);
    /// volatile.read();
    /// //ERROR: ^^^^ the trait `volatile::access::Readable` is not implemented
    /// //            for `volatile::access::WriteOnly`
    /// ```
    pub const fn new_write_only(reference: R) -> Volatile<R, WriteOnly> {
        Volatile {
            reference,
            access: PhantomData,
        }
    }
}

/// Methods for references to `Copy` types
impl<R, T, A> Volatile<R, A>
where
    R: Deref<Target = T>,
    T: Copy,
{
    /// Performs a volatile read of the contained value.
    ///
    /// Returns a copy of the read value. Volatile reads are guaranteed not to be optimized
    /// away by the compiler, but by themselves do not have atomic ordering
    /// guarantees. To also get atomicity, consider looking at the `Atomic` wrapper types of
    /// the standard/`core` library.
    ///
    /// ## Examples
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let value = 42;
    /// let shared_reference = Volatile::new(&value);
    /// assert_eq!(shared_reference.read(), 42);
    ///
    /// let mut value = 50;
    /// let mut_reference = Volatile::new(&mut value);
    /// assert_eq!(mut_reference.read(), 50);
    /// ```
    pub fn read(&self) -> T
    where
        A: Readable,
    {
        // UNSAFE: Safe, as we know that our internal value exists.
        unsafe { ptr::read_volatile(&*self.reference) }
    }

    /// Performs a volatile write, setting the contained value to the given `value`.
    ///
    /// Volatile writes are guaranteed to not be optimized away by the compiler, but by
    /// themselves do not have atomic ordering guarantees. To also get atomicity, consider
    /// looking at the `Atomic` wrapper types of the standard/`core` library.
    ///
    /// ## Example
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let mut value = 42;
    /// let mut volatile = Volatile::new(&mut value);
    /// volatile.write(50);
    ///
    /// assert_eq!(volatile.read(), 50);
    /// ```
    pub fn write(&mut self, value: T)
    where
        A: Writable,
        R: DerefMut,
    {
        // UNSAFE: Safe, as we know that our internal value exists.
        unsafe { ptr::write_volatile(&mut *self.reference, value) };
    }

    /// Updates the contained value using the given closure and volatile instructions.
    ///
    /// Performs a volatile read of the contained value, passes a mutable reference to it to the
    /// function `f`, and then performs a volatile write of the (potentially updated) value back to
    /// the contained value.
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let mut value = 42;
    /// let mut volatile = Volatile::new(&mut value);
    /// volatile.update(|val| *val += 1);
    ///
    /// assert_eq!(volatile.read(), 43);
    /// ```
    pub fn update<F>(&mut self, f: F)
    where
        A: Readable + Writable,
        R: DerefMut,
        F: FnOnce(&mut T),
    {
        let mut value = self.read();
        f(&mut value);
        self.write(value);
    }
}

/// Method for extracting the wrapped value.
impl<R, A> Volatile<R, A> {
    /// Extracts the inner value stored in the wrapper type.
    ///
    /// This method gives direct access to the wrapped reference and thus allows
    /// non-volatile access again. This is seldom what you want since there is usually
    /// a reason that a reference is wrapped in `Volatile`. However, in some cases it might
    /// be required or useful to use the `read_volatile`/`write_volatile` pointer methods of
    /// the standard library directly, which this method makes possible.
    ///
    /// Since no memory safety violation can occur when accessing the referenced value using
    /// non-volatile operations, this method is safe. However, it _can_ lead to bugs at the
    /// application level, so this method should be used with care.
    ///
    /// ## Example
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut value = 42;
    /// let mut volatile = Volatile::new(&mut value);
    /// volatile.write(50);
    /// let unwrapped: &mut i32 = volatile.extract_inner();
    ///
    /// assert_eq!(*unwrapped, 50); // non volatile access, be careful!
    /// ```
    pub fn extract_inner(self) -> R {
        self.reference
    }
}

/// Transformation methods for accessing struct fields
impl<R, T, A> Volatile<R, A>
where
    R: Deref<Target = T>,
    T: ?Sized,
{
    /// Constructs a new `Volatile` reference by mapping the wrapped value.
    ///
    /// This method is useful for accessing individual fields of volatile structs.
    ///
    /// Note that this method gives temporary access to the wrapped reference, which allows
    /// accessing the value in a non-volatile way. This is normally not what you want, so
    /// **this method should only be used for reference-to-reference transformations**.
    ///
    /// ## Examples
    ///
    /// Accessing a struct field:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// struct Example { field_1: u32, field_2: u8, }
    /// let mut value = Example { field_1: 15, field_2: 255 };
    /// let mut volatile = Volatile::new(&mut value);
    ///
    /// // construct a volatile reference to a field
    /// let field_2 = volatile.map(|example| &example.field_2);
    /// assert_eq!(field_2.read(), 255);
    /// ```
    ///
    /// Don't misuse this method to do a non-volatile read of the referenced value:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut value = 5;
    /// let mut volatile = Volatile::new(&mut value);
    ///
    /// // DON'T DO THIS:
    /// let mut readout = 0;
    /// volatile.map(|value| {
    ///    readout = *value; // non-volatile read, might lead to bugs
    ///    value
    /// });
    /// ```
    pub fn map<'a, F, U>(&'a self, f: F) -> Volatile<&'a U, A>
    where
        F: FnOnce(&'a T) -> &'a U,
        U: ?Sized,
        T: 'a,
    {
        Volatile {
            reference: f(self.reference.deref()),
            access: self.access,
        }
    }

    /// Constructs a new mutable `Volatile` reference by mapping the wrapped value.
    ///
    /// This method is useful for accessing individual fields of volatile structs.
    ///
    /// Note that this method gives temporary access to the wrapped reference, which allows
    /// accessing the value in a non-volatile way. This is normally not what you want, so
    /// **this method should only be used for reference-to-reference transformations**.
    ///
    /// ## Examples
    ///
    /// Accessing a struct field:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// struct Example { field_1: u32, field_2: u8, }
    /// let mut value = Example { field_1: 15, field_2: 255 };
    /// let mut volatile = Volatile::new(&mut value);
    ///
    /// // construct a volatile reference to a field
    /// let mut field_2 = volatile.map_mut(|example| &mut example.field_2);
    /// field_2.write(128);
    /// assert_eq!(field_2.read(), 128);
    /// ```
    ///
    /// Don't misuse this method to do a non-volatile read or write of the referenced value:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut value = 5;
    /// let mut volatile = Volatile::new(&mut value);
    ///
    /// // DON'T DO THIS:
    /// volatile.map_mut(|value| {
    ///    *value = 10; // non-volatile write, might lead to bugs
    ///    value
    /// });
    /// ```
    pub fn map_mut<'a, F, U>(&'a mut self, f: F) -> Volatile<&'a mut U, A>
    where
        F: FnOnce(&mut T) -> &mut U,
        R: DerefMut,
        U: ?Sized,
        T: 'a,
    {
        Volatile {
            reference: f(&mut self.reference),
            access: self.access,
        }
    }
}

/// Methods for volatile slices
impl<T, R, A> Volatile<R, A>
where
    R: Deref<Target = [T]>,
{
    /// Applies the index operation on the wrapped slice.
    ///
    /// Returns a shared `Volatile` reference to the resulting subslice.
    ///
    /// This is a convenience method for the `map(|slice| slice.index(index))` operation, so it
    /// has the same behavior as the indexing operation on slice (e.g. panic if index is
    /// out-of-bounds).
    ///
    /// ## Examples
    ///
    /// Accessing a single slice element:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let array = [1, 2, 3];
    /// let slice = &array[..];
    /// let volatile = Volatile::new(slice);
    /// assert_eq!(volatile.index(1).read(), 2);
    /// ```
    ///
    /// Accessing a subslice:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let array = [1, 2, 3];
    /// let slice = &array[..];
    /// let volatile = Volatile::new(slice);
    /// let subslice = volatile.index(1..);
    /// assert_eq!(subslice.index(0).read(), 2);
    /// ```
    pub fn index<'a, I>(&'a self, index: I) -> Volatile<&'a I::Output, A>
    where
        I: SliceIndex<[T]>,
        T: 'a,
    {
        self.map(|slice| slice.index(index))
    }

    /// Applies the mutable index operation on the wrapped slice.
    ///
    /// Returns a mutable `Volatile` reference to the resulting subslice.
    ///
    /// This is a convenience method for the `map_mut(|slice| slice.index_mut(index))`
    /// operation, so it has the same behavior as the indexing operation on slice
    /// (e.g. panic if index is out-of-bounds).
    ///
    /// ## Examples
    ///
    /// Accessing a single slice element:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut array = [1, 2, 3];
    /// let slice = &mut array[..];
    /// let mut volatile = Volatile::new(slice);
    /// volatile.index_mut(1).write(6);
    /// assert_eq!(volatile.index(1).read(), 6);
    /// ```
    ///
    /// Accessing a subslice:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut array = [1, 2, 3];
    /// let slice = &mut array[..];
    /// let mut volatile = Volatile::new(slice);
    /// let mut subslice = volatile.index_mut(1..);
    /// subslice.index_mut(0).write(6);
    /// assert_eq!(subslice.index(0).read(), 6);
    /// ```
    pub fn index_mut<'a, I>(&'a mut self, index: I) -> Volatile<&mut I::Output, A>
    where
        I: SliceIndex<[T]>,
        R: DerefMut,
        T: 'a,
    {
        self.map_mut(|slice| slice.index_mut(index))
    }

    /// Copies all elements from `self` into `dst`, using a volatile memcpy.
    ///
    /// The length of `dst` must be the same as `self`.
    ///
    /// The method is only available with the `unstable` feature enabled (requires a nightly
    /// Rust compiler).
    ///
    /// ## Panics
    ///
    /// This function will panic if the two slices have different lengths.
    ///
    /// ## Examples
    ///
    /// Copying two elements from a volatile slice:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let src = [1, 2];
    /// // the `Volatile` type does not work with arrays, so convert `src` to a slice
    /// let slice = &src[..];
    /// let volatile = Volatile::new(slice);
    /// let mut dst = [5, 0, 0];
    ///
    /// // Because the slices have to be the same length,
    /// // we slice the destination slice from three elements
    /// // to two. It will panic if we don't do this.
    /// volatile.copy_into_slice(&mut dst[1..]);
    ///
    /// assert_eq!(src, [1, 2]);
    /// assert_eq!(dst, [5, 1, 2]);
    /// ```
    #[cfg(feature = "unstable")]
    pub fn copy_into_slice(&self, dst: &mut [T])
    where
        T: Copy,
    {
        assert_eq!(
            self.reference.len(),
            dst.len(),
            "destination and source slices have different lengths"
        );
        unsafe {
            intrinsics::volatile_copy_nonoverlapping_memory(
                dst.as_mut_ptr(),
                self.reference.as_ptr(),
                self.reference.len(),
            );
        }
    }

    /// Copies all elements from `src` into `self`, using a volatile memcpy.
    ///
    /// The length of `src` must be the same as `self`.
    ///
    /// This method is similar to the `slice::copy_from_slice` method of the standard library. The
    /// difference is that this method performs a volatile copy.
    ///
    /// The method is only available with the `unstable` feature enabled (requires a nightly
    /// Rust compiler).
    ///
    /// ## Panics
    ///
    /// This function will panic if the two slices have different lengths.
    ///
    /// ## Examples
    ///
    /// Copying two elements from a slice into a volatile slice:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let src = [1, 2, 3, 4];
    /// let mut dst = [0, 0];
    /// // the `Volatile` type does not work with arrays, so convert `dst` to a slice
    /// let slice = &mut dst[..];
    /// let mut volatile = Volatile::new(slice);
    ///
    /// // Because the slices have to be the same length,
    /// // we slice the source slice from four elements
    /// // to two. It will panic if we don't do this.
    /// volatile.copy_from_slice(&src[2..]);
    ///
    /// assert_eq!(src, [1, 2, 3, 4]);
    /// assert_eq!(dst, [3, 4]);
    /// ```
    #[cfg(feature = "unstable")]
    pub fn copy_from_slice(&mut self, src: &[T])
    where
        T: Copy,
        R: DerefMut,
    {
        assert_eq!(
            self.reference.len(),
            src.len(),
            "destination and source slices have different lengths"
        );
        unsafe {
            intrinsics::volatile_copy_nonoverlapping_memory(
                self.reference.as_mut_ptr(),
                src.as_ptr(),
                self.reference.len(),
            );
        }
    }

    /// Copies elements from one part of the slice to another part of itself, using a
    /// volatile `memmove`.
    ///
    /// `src` is the range within `self` to copy from. `dest` is the starting index of the
    /// range within `self` to copy to, which will have the same length as `src`. The two ranges
    /// may overlap. The ends of the two ranges must be less than or equal to `self.len()`.
    ///
    /// This method is similar to the `slice::copy_within` method of the standard library. The
    /// difference is that this method performs a volatile copy.
    ///
    /// This method is only available with the `unstable` feature enabled (requires a nightly
    /// Rust compiler).
    ///
    /// ## Panics
    ///
    /// This function will panic if either range exceeds the end of the slice, or if the end
    /// of `src` is before the start.
    ///
    /// ## Examples
    ///
    /// Copying four bytes within a slice:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut byte_array = *b"Hello, World!";
    /// let mut slice: &mut [u8] = &mut byte_array[..];
    /// let mut volatile = Volatile::new(slice);
    ///
    /// volatile.copy_within(1..5, 8);
    ///
    /// assert_eq!(&byte_array, b"Hello, Wello!");
    #[cfg(feature = "unstable")]
    pub fn copy_within(&mut self, src: impl RangeBounds<usize>, dest: usize)
    where
        T: Copy,
        R: DerefMut,
    {
        // implementation taken from https://github.com/rust-lang/rust/blob/683d1bcd405727fcc9209f64845bd3b9104878b8/library/core/src/slice/mod.rs#L2726-L2738
        let Range {
            start: src_start,
            end: src_end,
        } = range(src, ..self.reference.len());
        let count = src_end - src_start;
        assert!(
            dest <= self.reference.len() - count,
            "dest is out of bounds"
        );
        // SAFETY: the conditions for `volatile_copy_memory` have all been checked above,
        // as have those for `ptr::add`.
        unsafe {
            intrinsics::volatile_copy_memory(
                self.reference.as_mut_ptr().add(dest),
                self.reference.as_ptr().add(src_start),
                count,
            );
        }
    }
}

/// Methods for volatile byte slices
impl<R, A> Volatile<R, A>
where
    R: Deref<Target = [u8]>,
{
    /// Sets all elements of the byte slice to the given `value` using a volatile `memset`.
    ///
    /// This method is similar to the `slice::fill` method of the standard library, with the
    /// difference that this method performs a volatile write operation. Another difference
    /// is that this method is only available for byte slices (not general `&mut [T]` slices)
    /// because there currently isn't a instrinsic function that allows non-`u8` values.
    ///
    /// This method is only available with the `unstable` feature enabled (requires a nightly
    /// Rust compiler).
    ///
    /// ## Example
    ///
    /// ```rust
    /// use volatile::Volatile;
    ///
    /// let mut buf = Volatile::new(vec![0; 10]);
    /// buf.fill(1);
    /// assert_eq!(buf.extract_inner(), vec![1; 10]);
    /// ```
    #[cfg(feature = "unstable")]
    pub fn fill(&mut self, value: u8)
    where
        R: DerefMut,
    {
        unsafe {
            intrinsics::volatile_set_memory(
                self.reference.as_mut_ptr(),
                value,
                self.reference.len(),
            );
        }
    }
}

/// Methods for converting arrays to slices
impl<R, A, T, const N: usize> Volatile<R, A>
where
    R: Deref<Target = [T; N]>,
{
    /// Converts an array reference to a shared slice.
    ///
    /// This makes it possible to use the methods defined on slices.
    ///
    /// ## Example
    ///
    /// Reading a subslice from a volatile array reference using `index`:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let src = [1, 2, 3, 4];
    /// let volatile = Volatile::new(&src);
    ///
    /// // convert the `Volatile<&[i32; 4]>` array reference to a `Volatile<&[i32]>` slice
    /// let volatile_slice = volatile.as_slice();
    /// // we can now use the slice methods
    /// let subslice = volatile_slice.index(2..);
    ///
    /// assert_eq!(subslice.index(0).read(), 3);
    /// assert_eq!(subslice.index(1).read(), 4);
    /// ```
    pub fn as_slice(&self) -> Volatile<&[T], A> {
        self.map(|array| &array[..])
    }

    /// Converts a mutable array reference to a mutable slice.
    ///
    /// This makes it possible to use the methods defined on slices.
    ///
    /// ## Example
    ///
    /// Writing to an index of a mutable array reference:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut dst = [0, 0];
    /// let mut volatile = Volatile::new(&mut dst);
    ///
    /// // convert the `Volatile<&mut [i32; 2]>` array reference to a `Volatile<&mut [i32]>` slice
    /// let mut volatile_slice = volatile.as_mut_slice();
    /// // we can now use the slice methods
    /// volatile_slice.index_mut(1).write(1);
    ///
    /// assert_eq!(dst, [0, 1]);
    /// ```
    pub fn as_mut_slice(&mut self) -> Volatile<&mut [T], A>
    where
        R: DerefMut,
    {
        self.map_mut(|array| &mut array[..])
    }
}

/// Methods for restricting access.
impl<R> Volatile<R> {
    /// Restricts access permissions to read-only.
    ///
    /// ## Example
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// let mut value: i16 = -4;
    /// let mut volatile = Volatile::new(&mut value);
    ///
    /// let read_only = volatile.read_only();
    /// assert_eq!(read_only.read(), -4);
    /// // read_only.write(10); // compile-time error
    /// ```
    pub fn read_only(self) -> Volatile<R, ReadOnly> {
        Volatile {
            reference: self.reference,
            access: PhantomData,
        }
    }

    /// Restricts access permissions to write-only.
    ///
    /// ## Example
    ///
    /// Creating a write-only reference to a struct field:
    ///
    /// ```
    /// use volatile::Volatile;
    ///
    /// struct Example { field_1: u32, field_2: u8, }
    /// let mut value = Example { field_1: 15, field_2: 255 };
    /// let mut volatile = Volatile::new(&mut value);
    ///
    /// // construct a volatile write-only reference to `field_2`
    /// let mut field_2 = volatile.map_mut(|example| &mut example.field_2).write_only();
    /// field_2.write(14);
    /// // field_2.read(); // compile-time error
    /// ```
    pub fn write_only(self) -> Volatile<R, WriteOnly> {
        Volatile {
            reference: self.reference,
            access: PhantomData,
        }
    }
}

impl<R, T, A> fmt::Debug for Volatile<R, A>
where
    R: Deref<Target = T>,
    T: Copy + fmt::Debug,
    A: Readable,
{
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_tuple("Volatile").field(&self.read()).finish()
    }
}

impl<R> fmt::Debug for Volatile<R, WriteOnly>
where
    R: Deref,
{
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_tuple("Volatile").field(&"[write-only]").finish()
    }
}

#[cfg(test)]
mod tests {
    use super::Volatile;

    #[test]
    fn test_read() {
        let val = 42;
        assert_eq!(Volatile::new(&val).read(), 42);
    }

    #[test]
    fn test_write() {
        let mut val = 50;
        let mut volatile = Volatile::new(&mut val);
        volatile.write(50);
        assert_eq!(val, 50);
    }

    #[test]
    fn test_update() {
        let mut val = 42;
        let mut volatile = Volatile::new(&mut val);
        volatile.update(|v| *v += 1);
        assert_eq!(val, 43);
    }

    #[test]
    fn test_slice() {
        let mut val = [1, 2, 3];
        let mut volatile = Volatile::new(&mut val[..]);
        volatile.index_mut(0).update(|v| *v += 1);
        assert_eq!(val, [2, 2, 3]);
    }

    #[test]
    fn test_struct() {
        struct S {
            field_1: u32,
            field_2: bool,
        }

        let mut val = S {
            field_1: 60,
            field_2: true,
        };
        let mut volatile = Volatile::new(&mut val);
        volatile.map_mut(|s| &mut s.field_1).update(|v| *v += 1);
        let mut field_2 = volatile.map_mut(|s| &mut s.field_2);
        assert!(field_2.read());
        field_2.write(false);
        assert_eq!(volatile.map(|s| &s.field_1).read(), 61);
        assert_eq!(volatile.map(|s| &s.field_2).read(), false);
    }

    #[cfg(feature = "unstable")]
    #[test]
    fn test_chunks() {
        let mut val = [1, 2, 3, 4, 5, 6];
        let mut volatile = Volatile::new(&mut val[..]);
        let mut chunks = volatile.map_mut(|s| s.as_chunks_mut().0);
        chunks.index_mut(1).write([10, 11, 12]);
        assert_eq!(chunks.index(0).read(), [1, 2, 3]);
        assert_eq!(chunks.index(1).read(), [10, 11, 12]);
    }
}