Skip to content

Commit d19281a

Browse files
fpistmfpistm
committed
[variant] Add Generic L1xx
Signed-off-by: Frederic Pillon <[email protected]>
1 parent ff0f876 commit d19281a

20 files changed

+1330
-1353
lines changed

Diff for: ‎README.md

+15-1
Original file line numberDiff line numberDiff line change
@@ -60,6 +60,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
6060
- [Generic STM32G4 boards](#generic-stm32g4-boards)
6161
- [Generic STM32H7 boards](#generic-stm32h7-boards)
6262
- [Generic STM32L0 boards](#generic-stm32l0-boards)
63+
- [Generic STM32L1 boards](#generic-stm32l1-boards)
6364
- [Generic STM32L4 boards](#generic-stm32l4-boards)
6465
- [Generic STM32L5 boards](#generic-stm32l5-boards)
6566
- [Generic STM32WB boards](#generic-stm32wb-boards)
@@ -273,6 +274,19 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
273274
| :green_heart: | STM32L072RB | [PX-HER0](https://piconomix.com/fwlib/_p_i_c_o_n_o_m_i_x__s_t_m32__h_e_r_o__b_o_a_r_d.html) | *1.8.0* | |
274275
| :green_heart: | STM32L072KZ | [ThunderPack v1.0](https://github.com/jgillick/ThunderPack) | *1.8.0* | |
275276

277+
### Generic STM32L1 boards
278+
279+
| Status | Device(s) | Name | Release | Notes |
280+
| :----: | :-------: | ---- | :-----: | :---- |
281+
| :yellow_heart: | STM32L100C6<br>STM32L100C6-A | Generic Board | **2.0.0** | |
282+
| :yellow_heart: | STM32L151C6<br>STM32L151C8<br>STM32L151CB | Generic Board | **2.0.0** | |
283+
| :yellow_heart: | STM32L151C6-A<br>STM32L151C8-A<br>STM32L151CB-A | Generic Board | **2.0.0** | |
284+
| :yellow_heart: | STM32L152C6<br>STM32L152C8<br>STM32L152CB | Generic Board | **2.0.0** | |
285+
| :yellow_heart: | STM32L152C6-A<br>STM32L152C8-A<br>STM32L152CB-A | Generic Board | **2.0.0** | |
286+
| :yellow_heart: | STM32L151RE | Generic Board | **2.0.0** | |
287+
| :yellow_heart: | STM32L152RE | Generic Board | **2.0.0** | |
288+
| :yellow_heart: | STM32L162RE | Generic Board | **2.0.0** | |
289+
276290
### Generic STM32L4 boards
277291

278292
| Status | Device(s) | Name | Release | Notes |
@@ -338,7 +352,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
338352
| Status | Device(s) | Name | Release | Notes |
339353
| :----: | :-------: | ---- | :-----: | :---- |
340354
| :green_heart: | STM32F072C8<br>STM32F072CB | [Elektor LoRa Node](https://github.com/ElektorLabs/180516-Elektor_LoRa_Node) | *1.8.0* | [More info](https://www.elektormagazine.com/labs/lorawan-node-experimental-platform) |
341-
| :green_heart: | STM32L151RB | [RAK811 LoRa Tracker](https://www.rakwireless.com/en/) | *1.4.0* | [Wiki](https://github.com/stm32duino/wiki/wiki/Connectivities#lora) |
355+
| :green_heart: | STM32L151CB | [RAK811 LoRa Tracker](https://www.rakwireless.com/en/) | *1.4.0* | [Wiki](https://github.com/stm32duino/wiki/wiki/Connectivities#lora) |
342356
| :green_heart: | STM32L051C8 | [RHF76-052](https://www.ai-thinker.com/) | *1.7.0* | Basic support |
343357

344358
### Electronic Speed Controller boards

Diff for: ‎boards.txt

+309-5
Large diffs are not rendered by default.

Diff for: ‎variants/STM32L1xx/L100C6_L100C6A_L151C(6-8-B)_L151C(6-8-B)A_L152C(6-8-B)_L152C(6-8-B)A/PeripheralPins_RAK811_TRACKER.c

+218
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,218 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32L151C(6-8-B)Tx.xml
15+
* CubeMX DB release 6.0.10
16+
*/
17+
#if defined(ARDUINO_RAK811_TRACKER) || defined(ARDUINO_RAK811_TRACKERA)
18+
#include "Arduino.h"
19+
#include "PeripheralPins.h"
20+
21+
/* =====
22+
* Notes:
23+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
24+
* HW peripheral instances. You can use them the same way as any other "normal"
25+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
26+
*
27+
* - Commented lines are alternative possibilities which are not used per default.
28+
* If you change them, you will have to know what you do
29+
* =====
30+
*/
31+
32+
//*** ADC ***
33+
34+
#ifdef HAL_ADC_MODULE_ENABLED
35+
WEAK const PinMap PinMap_ADC[] = {
36+
// {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
37+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
38+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - ADC_VBAT
39+
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - RADIO_DIO_2
40+
// {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - RADIO_RF_CTX_PA
41+
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - RADIO_SCLK
42+
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - RADIO_MISO
43+
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - RADIO_MOSI
44+
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - RADIO_NSS
45+
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - RADIO_DIO_1
46+
{PB_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18
47+
// {PB_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC_IN19 - RADIO_RESET
48+
// {PB_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 20, 0)}, // ADC_IN20 - LIS3DH_INT1_PIN
49+
// {PB_15, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 21, 0)}, // ADC_IN21 - LIS3DH_INT2_PIN
50+
{NC, NP, 0}
51+
};
52+
#endif
53+
54+
//*** DAC ***
55+
56+
#ifdef HAL_DAC_MODULE_ENABLED
57+
WEAK const PinMap PinMap_DAC[] = {
58+
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - RADIO_RF_CTX_PA
59+
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - RADIO_SCLK
60+
{NC, NP, 0}
61+
};
62+
#endif
63+
64+
//*** I2C ***
65+
66+
#ifdef HAL_I2C_MODULE_ENABLED
67+
WEAK const PinMap PinMap_I2C_SDA[] = {
68+
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // RADIO_RF_CBT_HF
69+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
70+
// {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // GPS_UART_RX
71+
{NC, NP, 0}
72+
};
73+
#endif
74+
75+
#ifdef HAL_I2C_MODULE_ENABLED
76+
WEAK const PinMap PinMap_I2C_SCL[] = {
77+
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // RADIO_RF_CRX_RX
78+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
79+
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // GPS_UART_TX
80+
{NC, NP, 0}
81+
};
82+
#endif
83+
84+
//*** TIM ***
85+
86+
#ifdef HAL_TIM_MODULE_ENABLED
87+
WEAK const PinMap PinMap_TIM[] = {
88+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
89+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
90+
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ADC_VBAT
91+
// {PA_2_ALT1, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - ADC_VBAT
92+
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - RADIO_DIO_2
93+
// {PA_3_ALT1, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - RADIO_DIO_2
94+
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - RADIO_SCLK
95+
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - RADIO_MISO
96+
// {PA_6_ALT1, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1- RADIO_MISO
97+
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - RADIO_MOSI
98+
// {PA_7_ALT1, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - RADIO_MOSI
99+
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - GPS_POWER_ON_PIN
100+
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - RADIO_NSS
101+
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - RADIO_DIO_1
102+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
103+
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - LED2
104+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
105+
// {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - RADIO_RF_CRX_RX
106+
// {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - RADIO_RF_CBT_HF
107+
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
108+
{PB_8_ALT1, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
109+
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
110+
{PB_9_ALT1, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
111+
// {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - GPS_UART_TX
112+
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - GPS_UART_RX
113+
{PB_12, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
114+
// {PB_13, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - RADIO_RESET
115+
// {PB_14, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - LIS3DH_INT1_PIN
116+
// {PB_15, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - LIS3DH_INT2_PIN
117+
{NC, NP, 0}
118+
};
119+
#endif
120+
121+
//*** UART ***
122+
123+
#ifdef HAL_UART_MODULE_ENABLED
124+
WEAK const PinMap PinMap_UART_TX[] = {
125+
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ADC_VBAT
126+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // UART_TX
127+
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_RF_CRX_RX
128+
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // GPS_UART_TX
129+
{NC, NP, 0}
130+
};
131+
#endif
132+
133+
#ifdef HAL_UART_MODULE_ENABLED
134+
WEAK const PinMap PinMap_UART_RX[] = {
135+
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // RADIO_DIO_2
136+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // UART_RX
137+
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_RF_CBT_HF
138+
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // GPS_UART_RX
139+
{NC, NP, 0}
140+
};
141+
#endif
142+
143+
#ifdef HAL_UART_MODULE_ENABLED
144+
WEAK const PinMap PinMap_UART_RTS[] = {
145+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
146+
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // LED1
147+
// {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LIS3DH_INT1_PIN
148+
{NC, NP, 0}
149+
};
150+
#endif
151+
152+
#ifdef HAL_UART_MODULE_ENABLED
153+
WEAK const PinMap PinMap_UART_CTS[] = {
154+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
155+
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_DIO_0
156+
// {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // RADIO_RESET
157+
{NC, NP, 0}
158+
};
159+
#endif
160+
161+
//*** SPI ***
162+
163+
#ifdef HAL_SPI_MODULE_ENABLED
164+
WEAK const PinMap PinMap_SPI_MOSI[] = {
165+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_MOSI
166+
// {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED1
167+
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
168+
// {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LIS3DH_INT2_PIN
169+
{NC, NP, 0}
170+
};
171+
#endif
172+
173+
#ifdef HAL_SPI_MODULE_ENABLED
174+
WEAK const PinMap PinMap_SPI_MISO[] = {
175+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_MISO
176+
// {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_DIO_0
177+
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED2
178+
// {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LIS3DH_INT1_PIN
179+
{NC, NP, 0}
180+
};
181+
#endif
182+
183+
#ifdef HAL_SPI_MODULE_ENABLED
184+
WEAK const PinMap PinMap_SPI_SCLK[] = {
185+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_SCLK
186+
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
187+
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // RADIO_RESET
188+
{NC, NP, 0}
189+
};
190+
#endif
191+
192+
#ifdef HAL_SPI_MODULE_ENABLED
193+
WEAK const PinMap PinMap_SPI_SSEL[] = {
194+
// {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_RF_CTX_PA
195+
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // GPS_POWER_ON_PIN
196+
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
197+
{NC, NP, 0}
198+
};
199+
#endif
200+
201+
//*** No CAN ***
202+
203+
//*** No ETHERNET ***
204+
205+
//*** No QUADSPI ***
206+
207+
//*** USB ***
208+
209+
#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
210+
WEAK const PinMap PinMap_USB[] = {
211+
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM
212+
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP
213+
{NC, NP, 0}
214+
};
215+
#endif
216+
217+
//*** No SD ***
218+
#endif /* ARDUINO_ */

Diff for: ‎variants/STM32L1xx/L100C6_L100C6A_L151C(6-8-B)_L151C(6-8-B)A_L152C(6-8-B)_L152C(6-8-B)A/generic_clock.c

+31-2
Original file line numberDiff line numberDiff line change
@@ -32,8 +32,37 @@
3232
*/
3333
WEAK void SystemClock_Config(void)
3434
{
35-
/* SystemClock_Config can be generated by STM32CubeMX */
36-
#warning "SystemClock_Config() is empty. Default clock at reset is used."
35+
RCC_OscInitTypeDef RCC_OscInitStruct = {};
36+
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
37+
38+
/** Configure the main internal regulator output voltage
39+
*/
40+
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
41+
/** Initializes the RCC Oscillators according to the specified parameters
42+
* in the RCC_OscInitTypeDef structure.
43+
*/
44+
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
45+
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
46+
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
47+
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
48+
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
49+
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
50+
RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3;
51+
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
52+
Error_Handler();
53+
}
54+
/** Initializes the CPU, AHB and APB buses clocks
55+
*/
56+
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
57+
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
58+
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
59+
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
60+
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
61+
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
62+
63+
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
64+
Error_Handler();
65+
}
3766
}
3867

3968
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)