Skip to content

Commit c5f8e79

Browse files
fpistmfpistm
committed
[ThunderPack] Split variant per series
Signed-off-by: Frederic Pillon <[email protected]>
1 parent 7b18b7b commit c5f8e79

File tree

10 files changed

+644
-145
lines changed

10 files changed

+644
-145
lines changed

‎variants/STM32F4xx/THUNDERPACK/PeripheralPins.c

Lines changed: 181 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,181 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
* Automatically generated from STM32F411C(C-E)Ux.xml
13+
* and merged manually with the STM32L072K(B-Z)Tx.xml
14+
* to fit ThunderPack requirements
15+
*/
16+
#include "Arduino.h"
17+
#include "PeripheralPins.h"
18+
19+
/* =====
20+
* Note: Commented lines are alternative possibilities which are not used per default.
21+
* If you change them, you will have to know what you do
22+
* =====
23+
*/
24+
25+
//*** ADC ***
26+
27+
#ifdef HAL_ADC_MODULE_ENABLED
28+
WEAK const PinMap PinMap_ADC[] = {
29+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
30+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
31+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
32+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
33+
{NC, NP, 0}
34+
};
35+
#endif
36+
37+
//*** No DAC ***
38+
39+
//*** I2C ***
40+
41+
#ifdef HAL_I2C_MODULE_ENABLED
42+
WEAK const PinMap PinMap_I2C_SDA[] = {
43+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
44+
{NC, NP, 0}
45+
};
46+
#endif
47+
48+
#ifdef HAL_I2C_MODULE_ENABLED
49+
WEAK const PinMap PinMap_I2C_SCL[] = {
50+
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
51+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
52+
{NC, NP, 0}
53+
};
54+
#endif
55+
56+
//*** PWM ***
57+
58+
#ifdef HAL_TIM_MODULE_ENABLED
59+
WEAK const PinMap PinMap_PWM[] = {
60+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
61+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
62+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
63+
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
64+
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
65+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
66+
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
67+
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
68+
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
69+
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
70+
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
71+
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
72+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
73+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
74+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
75+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
76+
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
77+
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
78+
{NC, NP, 0}
79+
};
80+
#endif
81+
82+
//*** SERIAL ***
83+
84+
#ifdef HAL_UART_MODULE_ENABLED
85+
WEAK const PinMap PinMap_UART_TX[] = {
86+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
87+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
88+
{NC, NP, 0}
89+
};
90+
#endif
91+
92+
#ifdef HAL_UART_MODULE_ENABLED
93+
WEAK const PinMap PinMap_UART_RX[] = {
94+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
95+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
96+
{NC, NP, 0}
97+
};
98+
#endif
99+
100+
#ifdef HAL_UART_MODULE_ENABLED
101+
WEAK const PinMap PinMap_UART_RTS[] = {
102+
{NC, NP, 0}
103+
};
104+
#endif
105+
106+
#ifdef HAL_UART_MODULE_ENABLED
107+
WEAK const PinMap PinMap_UART_CTS[] = {
108+
{NC, NP, 0}
109+
};
110+
#endif
111+
112+
//*** SPI ***
113+
114+
#ifdef HAL_SPI_MODULE_ENABLED
115+
WEAK const PinMap PinMap_SPI_MOSI[] = {
116+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
117+
{PA_10, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
118+
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
119+
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
120+
{NC, NP, 0}
121+
};
122+
#endif
123+
124+
#ifdef HAL_SPI_MODULE_ENABLED
125+
WEAK const PinMap PinMap_SPI_MISO[] = {
126+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
127+
{NC, NP, 0}
128+
};
129+
#endif
130+
131+
#ifdef HAL_SPI_MODULE_ENABLED
132+
WEAK const PinMap PinMap_SPI_SCLK[] = {
133+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
134+
{NC, NP, 0}
135+
};
136+
#endif
137+
138+
#ifdef HAL_SPI_MODULE_ENABLED
139+
WEAK const PinMap PinMap_SPI_SSEL[] = {
140+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
141+
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
142+
{NC, NP, 0}
143+
};
144+
#endif
145+
146+
//*** No CAN ***
147+
148+
//*** No ETHERNET ***
149+
150+
//*** No QUADSPI ***
151+
152+
//*** USB ***
153+
154+
#if defined(HAL_PCD_MODULE_ENABLED)
155+
WEAK const PinMap PinMap_USB_OTG_FS[] = {
156+
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
157+
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
158+
{NC, NP, 0}
159+
};
160+
#endif
161+
162+
//*** No USB_OTG_HS ***
163+
164+
//*** SD ***
165+
166+
#if defined(HAL_SD_MODULE_ENABLED)
167+
WEAK const PinMap PinMap_SD[] = {
168+
{PA_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
169+
{PA_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
170+
{PA_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
171+
{PB_4, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
172+
{PB_5, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
173+
{PB_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
174+
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
175+
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
176+
{PB_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
177+
{PB_14, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
178+
{PB_15, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
179+
{NC, NP, 0}
180+
};
181+
#endif

‎variants/STM32F4xx/THUNDERPACK/PinNamesVar.h

Lines changed: 33 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,33 @@
1+
/* SYS_WKUP */
2+
#ifdef PWR_WAKEUP_PIN1
3+
SYS_WKUP1 = PA_0,
4+
#endif
5+
#ifdef PWR_WAKEUP_PIN2
6+
SYS_WKUP2 = NC,
7+
#endif
8+
#ifdef PWR_WAKEUP_PIN3
9+
SYS_WKUP3 = NC,
10+
#endif
11+
#ifdef PWR_WAKEUP_PIN4
12+
SYS_WKUP4 = NC,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN5
15+
SYS_WKUP5 = NC,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN6
18+
SYS_WKUP6 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN7
21+
SYS_WKUP7 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN8
24+
SYS_WKUP8 = NC,
25+
#endif
26+
/* USB */
27+
#ifdef USBCON
28+
USB_OTG_FS_SOF = PA_8,
29+
USB_OTG_FS_VBUS = PA_9,
30+
USB_OTG_FS_ID = PA_10,
31+
USB_OTG_FS_DM = PA_11,
32+
USB_OTG_FS_DP = PA_12,
33+
#endif

‎variants/STM32F4xx/THUNDERPACK/README.md

Lines changed: 7 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,7 @@
1+
# ThunderPack
2+
A self-contained microcontroller, battery and power management system that fits in your pocket.
3+
4+
* ThunderPack v1.0 based on STM32L072KZTx
5+
* ThunderPack v1.1+ based on STM32F411CEUx
6+
7+
More info: https://github.com/jgillick/ThunderPack

0 commit comments

Comments
 (0)