Skip to content

Commit b289170

Browse files
fpistmfpistm
committed
Add all generated STM32WBxx generic variant files
Signed-off-by: Frederic Pillon <[email protected]>
1 parent 6d1f69b commit b289170

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

66 files changed

+5908
-0
lines changed

‎variants/STM32WBxx/WB10CCU/PeripheralPins.c

+181
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,181 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32WB10CCUx.xml
15+
* CubeMX DB release 6.0.21
16+
*/
17+
#if !defined(CUSTOM_PERIPHERAL_PINS)
18+
#include "Arduino.h"
19+
#include "PeripheralPins.h"
20+
21+
/* =====
22+
* Notes:
23+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
24+
* HW peripheral instances. You can use them the same way as any other "normal"
25+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
26+
*
27+
* - Commented lines are alternative possibilities which are not used per default.
28+
* If you change them, you will have to know what you do
29+
* =====
30+
*/
31+
32+
//*** ADC ***
33+
34+
#ifdef HAL_ADC_MODULE_ENABLED
35+
WEAK const PinMap PinMap_ADC[] = {
36+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
37+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
38+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
39+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
40+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
41+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
42+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
43+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
44+
{PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
45+
{PA_9, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
46+
{NC, NP, 0}
47+
};
48+
#endif
49+
50+
//*** No DAC ***
51+
52+
//*** I2C ***
53+
54+
#ifdef HAL_I2C_MODULE_ENABLED
55+
WEAK const PinMap PinMap_I2C_SDA[] = {
56+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
57+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
58+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
59+
{NC, NP, 0}
60+
};
61+
#endif
62+
63+
#ifdef HAL_I2C_MODULE_ENABLED
64+
WEAK const PinMap PinMap_I2C_SCL[] = {
65+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
66+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
67+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
68+
{NC, NP, 0}
69+
};
70+
#endif
71+
72+
//*** TIM ***
73+
74+
#ifdef HAL_TIM_MODULE_ENABLED
75+
WEAK const PinMap PinMap_TIM[] = {
76+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
77+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
78+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
79+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
80+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
81+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
82+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
83+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
84+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
85+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
86+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
87+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
88+
{PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM1, 3, 0)}, // TIM1_CH3
89+
{PB_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
90+
{PB_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
91+
{NC, NP, 0}
92+
};
93+
#endif
94+
95+
//*** UART ***
96+
97+
#ifdef HAL_UART_MODULE_ENABLED
98+
WEAK const PinMap PinMap_UART_TX[] = {
99+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
100+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
101+
{NC, NP, 0}
102+
};
103+
#endif
104+
105+
#ifdef HAL_UART_MODULE_ENABLED
106+
WEAK const PinMap PinMap_UART_RX[] = {
107+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
108+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
109+
{NC, NP, 0}
110+
};
111+
#endif
112+
113+
#ifdef HAL_UART_MODULE_ENABLED
114+
WEAK const PinMap PinMap_UART_RTS[] = {
115+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
116+
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
117+
{NC, NP, 0}
118+
};
119+
#endif
120+
121+
#ifdef HAL_UART_MODULE_ENABLED
122+
WEAK const PinMap PinMap_UART_CTS[] = {
123+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
124+
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
125+
{NC, NP, 0}
126+
};
127+
#endif
128+
129+
//*** SPI ***
130+
131+
#ifdef HAL_SPI_MODULE_ENABLED
132+
WEAK const PinMap PinMap_SPI_MOSI[] = {
133+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI1)},
134+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
135+
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
136+
{PA_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
137+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
138+
{NC, NP, 0}
139+
};
140+
#endif
141+
142+
#ifdef HAL_SPI_MODULE_ENABLED
143+
WEAK const PinMap PinMap_SPI_MISO[] = {
144+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
145+
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
146+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
147+
{NC, NP, 0}
148+
};
149+
#endif
150+
151+
#ifdef HAL_SPI_MODULE_ENABLED
152+
WEAK const PinMap PinMap_SPI_SCLK[] = {
153+
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
154+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
155+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
156+
{NC, NP, 0}
157+
};
158+
#endif
159+
160+
#ifdef HAL_SPI_MODULE_ENABLED
161+
WEAK const PinMap PinMap_SPI_SSEL[] = {
162+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
163+
{PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
164+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
165+
{PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
166+
{PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
167+
{NC, NP, 0}
168+
};
169+
#endif
170+
171+
//*** No CAN ***
172+
173+
//*** No ETHERNET ***
174+
175+
//*** No QUADSPI ***
176+
177+
//*** No USB ***
178+
179+
//*** No SD ***
180+
181+
#endif /* !CUSTOM_PERIPHERAL_PINS */

‎variants/STM32WBxx/WB10CCU/PinNamesVar.h

+29
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,29 @@
1+
/* No alternate */
2+
3+
/* SYS_WKUP */
4+
#ifdef PWR_WAKEUP_PIN1
5+
SYS_WKUP1 = PA_0,
6+
#endif
7+
#ifdef PWR_WAKEUP_PIN2
8+
SYS_WKUP2 = NC,
9+
#endif
10+
#ifdef PWR_WAKEUP_PIN3
11+
SYS_WKUP3 = NC,
12+
#endif
13+
#ifdef PWR_WAKEUP_PIN4
14+
SYS_WKUP4 = PA_2,
15+
#endif
16+
#ifdef PWR_WAKEUP_PIN5
17+
SYS_WKUP5 = NC,
18+
#endif
19+
#ifdef PWR_WAKEUP_PIN6
20+
SYS_WKUP6 = NC,
21+
#endif
22+
#ifdef PWR_WAKEUP_PIN7
23+
SYS_WKUP7 = NC,
24+
#endif
25+
#ifdef PWR_WAKEUP_PIN8
26+
SYS_WKUP8 = NC,
27+
#endif
28+
29+
/* No USB */

‎variants/STM32WBxx/WB10CCU/boards_entry.txt

+13
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,13 @@
1+
# This file help to add generic board entry.
2+
# upload.maximum_size and product_line have to be verified
3+
# and changed if needed.
4+
# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29
5+
6+
# Generic WB10CCUx
7+
GenWB.menu.pnum.GENERIC_WB10CCUX=Generic WB10CCUx
8+
GenWB.menu.pnum.GENERIC_WB10CCUX.upload.maximum_size=262144
9+
GenWB.menu.pnum.GENERIC_WB10CCUX.upload.maximum_data_size=49152
10+
GenWB.menu.pnum.GENERIC_WB10CCUX.build.board=GENERIC_WB10CCUX
11+
GenWB.menu.pnum.GENERIC_WB10CCUX.build.product_line=STM32WB10xx
12+
GenWB.menu.pnum.GENERIC_WB10CCUX.build.variant=STM32WBxx/WB10CCU
13+

‎variants/STM32WBxx/WB10CCU/generic_clock.c

+27
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,27 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_WB10CCUX)
14+
#include "pins_arduino.h"
15+
16+
/**
17+
* @brief System Clock Configuration
18+
* @param None
19+
* @retval None
20+
*/
21+
WEAK void SystemClock_Config(void)
22+
{
23+
/* SystemClock_Config can be generated by STM32CubeMX */
24+
#warning "SystemClock_Config() is empty. Default clock at reset is used."
25+
}
26+
27+
#endif /* ARDUINO_GENERIC_* */

‎variants/STM32WBxx/WB10CCU/variant_generic.cpp

+64
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,64 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_WB10CCUX)
14+
#include "pins_arduino.h"
15+
16+
// Digital PinName array
17+
const PinName digitalPin[] = {
18+
PA_0, // D1/A0
19+
PA_1, // D2/A1
20+
PA_2, // D3/A2
21+
PA_3, // D4/A3
22+
PA_4, // D5/A4
23+
PA_5, // D6/A5
24+
PA_6, // D7/A6
25+
PA_7, // D8/A7
26+
PA_8, // D9/A8
27+
PA_9, // D10/A9
28+
PA_10, // D11
29+
PA_11, // D12
30+
PA_12, // D13
31+
PA_13, // D14
32+
PA_14, // D15
33+
PA_15, // D16
34+
PB_0, // D17
35+
PB_1, // D18
36+
PB_2, // D19
37+
PB_3, // D20
38+
PB_4, // D21
39+
PB_5, // D22
40+
PB_6, // D23
41+
PB_7, // D24
42+
PB_8, // D25
43+
PB_9, // D26
44+
PC_14, // D27
45+
PC_15, // D28
46+
PE_4, // D29
47+
PH_3 // D30
48+
};
49+
50+
// Analog (Ax) pin number array
51+
const uint32_t analogInputPin[] = {
52+
0, // A0, PA0
53+
1, // A1, PA1
54+
2, // A2, PA2
55+
3, // A3, PA3
56+
4, // A4, PA4
57+
5, // A5, PA5
58+
6, // A6, PA6
59+
7, // A7, PA7
60+
8, // A8, PA8
61+
9 // A9, PA9
62+
};
63+
64+
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)