Skip to content

Commit aa488ea

Browse files
fpistmfpistm
committed
Add all generated STM32L0xx generic variant files
Signed-off-by: Frederic Pillon <[email protected]>
1 parent 0d77590 commit aa488ea

File tree

264 files changed

+23615
-0
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

264 files changed

+23615
-0
lines changed

‎variants/STM32L0xx/L010C6T/PeripheralPins.c

+201
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,201 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32L010C6Tx.xml
15+
* CubeMX DB release 6.0.21
16+
*/
17+
#if !defined(CUSTOM_PERIPHERAL_PINS)
18+
#include "Arduino.h"
19+
#include "PeripheralPins.h"
20+
21+
/* =====
22+
* Notes:
23+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
24+
* HW peripheral instances. You can use them the same way as any other "normal"
25+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
26+
*
27+
* - Commented lines are alternative possibilities which are not used per default.
28+
* If you change them, you will have to know what you do
29+
* =====
30+
*/
31+
32+
//*** ADC ***
33+
34+
#ifdef HAL_ADC_MODULE_ENABLED
35+
WEAK const PinMap PinMap_ADC[] = {
36+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
37+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
38+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
39+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
40+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
41+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
42+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
43+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
44+
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
45+
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
46+
{NC, NP, 0}
47+
};
48+
#endif
49+
50+
//*** No DAC ***
51+
52+
//*** I2C ***
53+
54+
#ifdef HAL_I2C_MODULE_ENABLED
55+
WEAK const PinMap PinMap_I2C_SDA[] = {
56+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
57+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
58+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
59+
{NC, NP, 0}
60+
};
61+
#endif
62+
63+
#ifdef HAL_I2C_MODULE_ENABLED
64+
WEAK const PinMap PinMap_I2C_SCL[] = {
65+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
66+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
67+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
68+
{NC, NP, 0}
69+
};
70+
#endif
71+
72+
//*** TIM ***
73+
74+
#ifdef HAL_TIM_MODULE_ENABLED
75+
WEAK const PinMap PinMap_TIM[] = {
76+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
77+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
78+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
79+
{PA_2_ALT1, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
80+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
81+
{PA_3_ALT1, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
82+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
83+
{PA_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
84+
{PA_11, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 2, 0)}, // TIM21_CH2
85+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
86+
{PB_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 3, 0)}, // TIM2_CH3
87+
{PB_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 4, 0)}, // TIM2_CH4
88+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
89+
{PB_6, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 1, 0)}, // TIM21_CH1
90+
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
91+
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
92+
{PB_13, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 1, 0)}, // TIM21_CH1
93+
{PB_14, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM21, 2, 0)}, // TIM21_CH2
94+
{NC, NP, 0}
95+
};
96+
#endif
97+
98+
//*** UART ***
99+
100+
#ifdef HAL_UART_MODULE_ENABLED
101+
WEAK const PinMap PinMap_UART_TX[] = {
102+
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
103+
{PA_2_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
104+
{PA_9, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
105+
{PA_14, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
106+
{PA_14_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
107+
{PB_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
108+
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
109+
{NC, NP, 0}
110+
};
111+
#endif
112+
113+
#ifdef HAL_UART_MODULE_ENABLED
114+
WEAK const PinMap PinMap_UART_RX[] = {
115+
{PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
116+
{PA_3_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
117+
{PA_10, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
118+
{PA_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
119+
{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
120+
{PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
121+
{PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
122+
{PC_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
123+
{NC, NP, 0}
124+
};
125+
#endif
126+
127+
#ifdef HAL_UART_MODULE_ENABLED
128+
WEAK const PinMap PinMap_UART_RTS[] = {
129+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
130+
{PA_12, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
131+
{PB_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
132+
{PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
133+
{PB_14, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
134+
{NC, NP, 0}
135+
};
136+
#endif
137+
138+
#ifdef HAL_UART_MODULE_ENABLED
139+
WEAK const PinMap PinMap_UART_CTS[] = {
140+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
141+
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
142+
{PA_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
143+
{PA_11, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
144+
{PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
145+
{NC, NP, 0}
146+
};
147+
#endif
148+
149+
//*** SPI ***
150+
151+
#ifdef HAL_SPI_MODULE_ENABLED
152+
WEAK const PinMap PinMap_SPI_MOSI[] = {
153+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
154+
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
155+
{PB_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
156+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
157+
{PB_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
158+
{NC, NP, 0}
159+
};
160+
#endif
161+
162+
#ifdef HAL_SPI_MODULE_ENABLED
163+
WEAK const PinMap PinMap_SPI_MISO[] = {
164+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
165+
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
166+
{PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI1)},
167+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
168+
{PB_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
169+
{NC, NP, 0}
170+
};
171+
#endif
172+
173+
#ifdef HAL_SPI_MODULE_ENABLED
174+
WEAK const PinMap PinMap_SPI_SCLK[] = {
175+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
176+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
177+
{PB_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
178+
{NC, NP, 0}
179+
};
180+
#endif
181+
182+
#ifdef HAL_SPI_MODULE_ENABLED
183+
WEAK const PinMap PinMap_SPI_SSEL[] = {
184+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
185+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
186+
{PB_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
187+
{NC, NP, 0}
188+
};
189+
#endif
190+
191+
//*** No CAN ***
192+
193+
//*** No ETHERNET ***
194+
195+
//*** No QUADSPI ***
196+
197+
//*** No USB ***
198+
199+
//*** No SD ***
200+
201+
#endif /* !CUSTOM_PERIPHERAL_PINS */

‎variants/STM32L0xx/L010C6T/PinNamesVar.h

+32
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,32 @@
1+
/* Alternate pin name */
2+
PA_2_ALT1 = PA_2 | ALT1,
3+
PA_3_ALT1 = PA_3 | ALT1,
4+
PA_14_ALT1 = PA_14 | ALT1,
5+
6+
/* SYS_WKUP */
7+
#ifdef PWR_WAKEUP_PIN1
8+
SYS_WKUP1 = PA_0,
9+
#endif
10+
#ifdef PWR_WAKEUP_PIN2
11+
SYS_WKUP2 = PC_13,
12+
#endif
13+
#ifdef PWR_WAKEUP_PIN3
14+
SYS_WKUP3 = PA_2,
15+
#endif
16+
#ifdef PWR_WAKEUP_PIN4
17+
SYS_WKUP4 = NC,
18+
#endif
19+
#ifdef PWR_WAKEUP_PIN5
20+
SYS_WKUP5 = NC,
21+
#endif
22+
#ifdef PWR_WAKEUP_PIN6
23+
SYS_WKUP6 = NC,
24+
#endif
25+
#ifdef PWR_WAKEUP_PIN7
26+
SYS_WKUP7 = NC,
27+
#endif
28+
#ifdef PWR_WAKEUP_PIN8
29+
SYS_WKUP8 = NC,
30+
#endif
31+
32+
/* No USB */

‎variants/STM32L0xx/L010C6T/boards_entry.txt

+13
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,13 @@
1+
# This file help to add generic board entry.
2+
# upload.maximum_size and product_line have to be verified
3+
# and changed if needed.
4+
# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29
5+
6+
# Generic L010C6Tx
7+
GenL0.menu.pnum.GENERIC_L010C6TX=Generic L010C6Tx
8+
GenL0.menu.pnum.GENERIC_L010C6TX.upload.maximum_size=32768
9+
GenL0.menu.pnum.GENERIC_L010C6TX.upload.maximum_data_size=8192
10+
GenL0.menu.pnum.GENERIC_L010C6TX.build.board=GENERIC_L010C6TX
11+
GenL0.menu.pnum.GENERIC_L010C6TX.build.product_line=STM32L010x6
12+
GenL0.menu.pnum.GENERIC_L010C6TX.build.variant=STM32L0xx/L010C6T
13+

‎variants/STM32L0xx/L010C6T/generic_clock.c

+27
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,27 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_L010C6TX)
14+
#include "pins_arduino.h"
15+
16+
/**
17+
* @brief System Clock Configuration
18+
* @param None
19+
* @retval None
20+
*/
21+
WEAK void SystemClock_Config(void)
22+
{
23+
/* SystemClock_Config can be generated by STM32CubeMX */
24+
#warning "SystemClock_Config() is empty. Default clock at reset is used."
25+
}
26+
27+
#endif /* ARDUINO_GENERIC_* */

‎variants/STM32L0xx/L010C6T/variant_generic.cpp

+72
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,72 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_L010C6TX)
14+
#include "pins_arduino.h"
15+
16+
// Digital PinName array
17+
const PinName digitalPin[] = {
18+
PA_0, // D1/A0
19+
PA_1, // D2/A1
20+
PA_2, // D3/A2
21+
PA_3, // D4/A3
22+
PA_4, // D5/A4
23+
PA_5, // D6/A5
24+
PA_6, // D7/A6
25+
PA_7, // D8/A7
26+
PA_8, // D9
27+
PA_9, // D10
28+
PA_10, // D11
29+
PA_11, // D12
30+
PA_12, // D13
31+
PA_13, // D14
32+
PA_14, // D15
33+
PA_15, // D16
34+
PB_0, // D17/A8
35+
PB_1, // D18/A9
36+
PB_2, // D19
37+
PB_3, // D20
38+
PB_4, // D21
39+
PB_5, // D22
40+
PB_6, // D23
41+
PB_7, // D24
42+
PB_8, // D25
43+
PB_9, // D26
44+
PB_10, // D27
45+
PB_11, // D28
46+
PB_12, // D29
47+
PB_13, // D30
48+
PB_14, // D31
49+
PB_15, // D32
50+
PC_0, // D33
51+
PC_13, // D34
52+
PC_14, // D35
53+
PC_15, // D36
54+
PH_0, // D37
55+
PH_1 // D38
56+
};
57+
58+
// Analog (Ax) pin number array
59+
const uint32_t analogInputPin[] = {
60+
0, // A0, PA0
61+
1, // A1, PA1
62+
2, // A2, PA2
63+
3, // A3, PA3
64+
4, // A4, PA4
65+
5, // A5, PA5
66+
6, // A6, PA6
67+
7, // A7, PA7
68+
16, // A8, PB0
69+
17 // A9, PB1
70+
};
71+
72+
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)