[variant] Update Generic MP1xx

As STM32MP1 is particular, the generic target have to be customized
by end user based on the used device tree.
So, currently, generic menu will not be shown.

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

Diff for: boards.txt

@@ -786,7 +786,6 @@ Eval.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg
 
 ################################################################################
 # STM32MP1 microprocessor series (MPU + MCU)
-
 STM32MP1.name=STM32MP1 series coprocessor
 
 STM32MP1.build.core=arduino
@@ -803,24 +802,21 @@ STM32MP1.menu.pnum.STM32MP157A_DK1.upload.maximum_size=131072
 STM32MP1.menu.pnum.STM32MP157A_DK1.upload.maximum_data_size=131072
 STM32MP1.menu.pnum.STM32MP157A_DK1.build.board=STM32MP157A_DK1
 STM32MP1.menu.pnum.STM32MP157A_DK1.build.product_line=STM32MP157Axx
-STM32MP1.menu.pnum.STM32MP157A_DK1.build.variant=STM32MP1xx/STM32MP157_DK
+STM32MP1.menu.pnum.STM32MP157A_DK1.build.variant=STM32MP1xx/STM32MP157xACx
 
 # STM32MP157C-DK2 board
 STM32MP1.menu.pnum.STM32MP157C_DK2=STM32MP157C-DK2
 STM32MP1.menu.pnum.STM32MP157C_DK2.upload.maximum_size=131072
 STM32MP1.menu.pnum.STM32MP157C_DK2.upload.maximum_data_size=131072
 STM32MP1.menu.pnum.STM32MP157C_DK2.build.board=STM32MP157C_DK2
 STM32MP1.menu.pnum.STM32MP157C_DK2.build.product_line=STM32MP157Cxx
-STM32MP1.menu.pnum.STM32MP157C_DK2.build.variant=STM32MP1xx/STM32MP157_DK
+STM32MP1.menu.pnum.STM32MP157C_DK2.build.variant=STM32MP1xx/STM32MP157xACx
 
 # Upload menu
 STM32MP1.menu.upload_method.MassStorage=Generate run_arduino.sh (You need to copy this manually)
 STM32MP1.menu.upload_method.MassStorage.upload.protocol=
 STM32MP1.menu.upload_method.MassStorage.upload.tool=remoteproc_gen
 
-################################################################################
-# Other boards
-
 ###############################
 # Generic F0
 GenF0.name=Generic STM32F0 series
@@ -2196,6 +2192,39 @@ GenL4.menu.upload_method.dfuMethod.upload.protocol=2
 GenL4.menu.upload_method.dfuMethod.upload.options=-g
 GenL4.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg
 
+#################################################################################
+## Generic MP1 microprocessor series (MPU + MCU)
+#GenMP1.name=Generic STM32MP1 series coprocessor
+#
+#GenMP1.build.core=arduino
+#GenMP1.build.board=GenMP1
+#GenMP1.build.mcu=cortex-m4
+#GenMP1.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
+#GenMP1.build.series=STM32MP1xx
+#GenMP1.build.cmsis_lib_gcc=arm_cortexM4l_math
+#GenMP1.build.extra_flags=-DCORE_CM4 -DUSE_FULL_LL_DRIVER -D{build.product_line} {build.enable_virtio} {build.xSerial}
+#
+## Generic MP157AAC board
+#GenMP1.menu.pnum.GENERIC_MP157AAC=Generic MP157AAC
+#GenMP1.menu.pnum.GENERIC_MP157AAC.upload.maximum_size=131072
+#GenMP1.menu.pnum.GENERIC_MP157AAC.upload.maximum_data_size=131072
+#GenMP1.menu.pnum.GENERIC_MP157AAC.build.board=GENERIC_MP157AAC
+#GenMP1.menu.pnum.GENERIC_MP157AAC.build.product_line=STM32MP157Axx
+#GenMP1.menu.pnum.GENERIC_MP157AAC.build.variant=STM32MP1xx/STM32MP157xACx
+#
+## Generic MP157CAC board
+#GenMP1.menu.pnum.GENERIC_MP157CAC=Generic MP157CAC
+#GenMP1.menu.pnum.GENERIC_MP157CAC.upload.maximum_size=131072
+#GenMP1.menu.pnum.GENERIC_MP157CAC.upload.maximum_data_size=131072
+#GenMP1.menu.pnum.GENERIC_MP157CAC.build.board=GENERIC_MP157CAC
+#GenMP1.menu.pnum.GENERIC_MP157CAC.build.product_line=STM32MP157Cxx
+#GenMP1.menu.pnum.GENERIC_MP157CAC.build.variant=STM32MP1xx/STM32MP157xACx
+#
+## Upload menu
+#GenMP1.menu.upload_method.MassStorage=Generate run_arduino.sh (You need to copy this manually)
+#GenMP1.menu.upload_method.MassStorage.upload.protocol=
+#GenMP1.menu.upload_method.MassStorage.upload.tool=remoteproc_gen
+
 ################################################################################
 # Electronic Speed Controller boards
 
@@ -2776,6 +2805,20 @@ GenL4.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
 GenL4.menu.xserial.disabled=Disabled (no Serial support)
 GenL4.menu.xserial.disabled.build.xSerial=
 
+#GenMP1.menu.virtio.disable=Disabled (no SerialVirtIO nor /dev/ttyRPMSG0 available)
+#GenMP1.menu.virtio.disable.build.enable_virtio=
+#GenMP1.menu.virtio.generic=SerialVirtIO (= generic 'Serial') <=> /dev/ttyRPMSG0
+#GenMP1.menu.virtio.generic.build.enable_virtio={build.virtio_flags}
+#GenMP1.menu.virtio.enabled=SerialVirtIO <=> /dev/ttyRPMSG0
+#GenMP1.menu.virtio.enabled.build.enable_virtio={build.virtio_flags} -DDISABLE_GENERIC_SERIALVIRTIO
+
+#GenMP1.menu.xserial.generic=UART only (generic 'Serial')
+#GenMP1.menu.xserial.generic.build.xSerial=-DHAL_UART_MODULE_ENABLED
+#GenMP1.menu.xserial.none=UART only (no generic 'Serial')
+#GenMP1.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
+#GenMP1.menu.xserial.disabled=Disabled (no Serial support)
+#GenMP1.menu.xserial.disabled.build.xSerial=
+
 ESC_board.menu.xserial.generic=Enabled (generic 'Serial')
 ESC_board.menu.xserial.none=Enabled (no generic 'Serial')
 ESC_board.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
@@ -3258,6 +3301,24 @@ GenL4.menu.opt.o3lto.build.flags.optimize=-O3 -flto
 GenL4.menu.opt.ogstd=Debug (-g)
 GenL4.menu.opt.ogstd.build.flags.optimize=-g -Og
 
+#GenMP1.menu.opt.osstd=Smallest (-Os default)
+#GenMP1.menu.opt.oslto=Smallest (-Os) with LTO
+#GenMP1.menu.opt.oslto.build.flags.optimize=-Os -flto
+#GenMP1.menu.opt.o1std=Fast (-O1)
+#GenMP1.menu.opt.o1std.build.flags.optimize=-O1
+#GenMP1.menu.opt.o1lto=Fast (-O1) with LTO
+#GenMP1.menu.opt.o1lto.build.flags.optimize=-O1 -flto
+#GenMP1.menu.opt.o2std=Faster (-O2)
+#GenMP1.menu.opt.o2std.build.flags.optimize=-O2
+#GenMP1.menu.opt.o2lto=Faster (-O2) with LTO
+#GenMP1.menu.opt.o2lto.build.flags.optimize=-O2 -flto
+#GenMP1.menu.opt.o3std=Fastest (-O3)
+#GenMP1.menu.opt.o3std.build.flags.optimize=-O3
+#GenMP1.menu.opt.o3lto=Fastest (-O3) with LTO
+#GenMP1.menu.opt.o3lto.build.flags.optimize=-O3 -flto
+#GenMP1.menu.opt.ogstd=Debug (-g)
+#GenMP1.menu.opt.ogstd.build.flags.optimize=-g -Og
+
 ESC_board.menu.opt.osstd=Smallest (-Os default)
 ESC_board.menu.opt.oslto=Smallest (-Os) with LTO
 ESC_board.menu.opt.oslto.build.flags.optimize=-Os -flto
@@ -3507,6 +3568,16 @@ GenL4.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float
 GenL4.menu.rtlib.full=Newlib Standard
 GenL4.menu.rtlib.full.build.flags.ldspecs=
 
+#GenMP1.menu.rtlib.nano=Newlib Nano (default)
+#GenMP1.menu.rtlib.nanofp=Newlib Nano + Float Printf
+#GenMP1.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
+#GenMP1.menu.rtlib.nanofs=Newlib Nano + Float Scanf
+#GenMP1.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
+#GenMP1.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
+#GenMP1.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
+#GenMP1.menu.rtlib.full=Newlib Standard
+#GenMP1.menu.rtlib.full.build.flags.ldspecs=
+
 ESC_board.menu.rtlib.nano=Newlib Nano (default)
 ESC_board.menu.rtlib.nanofp=Newlib Nano + Float Printf
 ESC_board.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float