[Nucleo-G071RB] Fix analog pin issue

Fixes stm32duino#736

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

variants/NUCLEO_G071RB/PeripheralPins.c

@@ -32,7 +32,7 @@ WEAK const PinMap PinMap_ADC[] = {
   //{PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
   {PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
   {PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
-  {PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+  //{PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
   {PB_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
   {PB_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
   {PB_10, ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11

variants/NUCLEO_G071RB/variant.cpp

@@ -34,9 +34,9 @@ const PinName digitalPin[] = {
   PA_8,  //D7
   PA_9,  //D8
   PC_7,  //D9
-  PB_0,  //D10/A8
-  PA_7,  //D11/A7
-  PA_6,  //D12/A6
+  PB_0,  //D10
+  PA_7,  //D11/A6
+  PA_6,  //D12/A7
   PA_5,  //D13/LED
   PB_9,  //D14
   PB_8,  //D15
@@ -74,10 +74,10 @@ const PinName digitalPin[] = {
   PA_12, //D42
   PC_1,  //D43
   PC_0,  //D44
-  PB_2,  //D45/A9
+  PB_2,  //D45/A8
   PB_6,  //D46
   PB_15, //D47
-  PB_10, //D48/A10
+  PB_10, //D48/A9
   PB_13, //D49
   PA_2,  //D50
   PD_8,  //D51
@@ -89,11 +89,10 @@ const PinName digitalPin[] = {
   PB_11, //D57/A4
   PB_12, //D58/A5
   // Duplicated pins in order to be aligned with PinMap_ADC
-  PB_0,  //D59/A6  = D10
-  PA_7,  //D60/A7  = D11
-  PA_6,  //D61/A8  = D12
-  PB_2,  //D62/A9  = D45
-  PB_10  //D63/A10 = D48
+  PA_7,  //D59/A6 = D11
+  PA_6,  //D60/A7 = D12
+  PB_2,  //D61/A8 = D45
+  PB_10  //D62/A9 = D48
 };
 
 #ifdef __cplusplus

variants/NUCLEO_G071RB/variant.h

@@ -37,9 +37,9 @@ extern "C" {
 #define PA8  7
 #define PA9  8
 #define PC7  9
-#define PB0  10 // A6
-#define PA7  11 // A7
-#define PA6  12 // A8
+#define PB0  10
+#define PA7  11 // A6
+#define PA6  12 // A7
 #define PA5  13 // LED
 #define PB9  14
 #define PB8  15
@@ -77,10 +77,10 @@ extern "C" {
 #define PA12 42
 #define PC1  43
 #define PC0  44
-#define PB2  45 // A9
+#define PB2  45 // A8
 #define PB6  46
 #define PB15 47
-#define PB10 48 // A10
+#define PB10 48 // A9
 #define PB13 49
 #define PA2  50
 #define PD8  51
@@ -93,9 +93,9 @@ extern "C" {
 #define PB12 58 // A5
 
 // This must be a literal
-#define NUM_DIGITAL_PINS        64
+#define NUM_DIGITAL_PINS        63
 // This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
-#define NUM_ANALOG_INPUTS       11
+#define NUM_ANALOG_INPUTS       10
 #define NUM_ANALOG_FIRST        53
 
 // On-board LED pin number