From edf1ba7fda8bb71a717d7f65481a7ee23fb43cb6 Mon Sep 17 00:00:00 2001 From: Luca Burelli Date: Wed, 22 May 2024 09:19:28 +0200 Subject: [PATCH] fix: remove "programmer.default" from Nano ESP32 Setting programmer.default has unfortunately multiple effects: - sets the tick by default in the Tool menu in the IDE (which was the expected behavior), - forces the CLI to use the specified programmer every time an upload is attempted (which is confusing users). For this reason, it is better to remove the "programmer.default" setting from the board definition and let the user choose the programmer in the IDE menus, as it was before. --- boards.txt | 1 - 1 file changed, 1 deletion(-) diff --git a/boards.txt b/boards.txt index fce66cfc02a..89ea4310436 100644 --- a/boards.txt +++ b/boards.txt @@ -26048,7 +26048,6 @@ nano_nora.debug.additional_config=debug_config.nano_nora nano_nora.tools.esptool_py.program.pattern_args=--chip {build.mcu} --port "{serial.port}" --before default_reset --after hard_reset write_flash -z --flash_mode {build.flash_mode} --flash_freq {build.flash_freq} --flash_size {build.flash_size} {build.bootloader_addr} "{build.path}/{build.project_name}.bootloader.bin" 0x8000 "{build.path}/{build.project_name}.partitions.bin" 0xe000 "{runtime.platform.path}/tools/partitions/boot_app0.bin" 0xf70000 "{build.variant.path}/extra/nora_recovery/nora_recovery.ino.bin" 0x10000 "{build.path}/{build.project_name}.bin" nano_nora.tools.esptool_py.erase.pattern_args=--chip {build.mcu} --port "{serial.port}" --before default_reset --after hard_reset erase_flash -nano_nora.programmer.default=esptool nano_nora.debug.executable= nano_nora.menu.PartitionScheme.default=With FAT partition (default)