fix(board): Update ESP32-C5 Dev Kit Pinout

Author: me-no-dev

Diff for: variants/esp32c5/pins_arduino.h

@@ -19,13 +19,13 @@ static const uint8_t RX = 12;
 // static const uint8_t USB_DM = 13;
 // static const uint8_t USB_DP = 14;
 
-static const uint8_t SDA = 23;
-static const uint8_t SCL = 22;
+static const uint8_t SDA = 0;
+static const uint8_t SCL = 1;
 
-static const uint8_t SS = 18;
-static const uint8_t MOSI = 19;
-static const uint8_t MISO = 20;
-static const uint8_t SCK = 21;
+static const uint8_t SS = 6;
+static const uint8_t MOSI = 8;
+static const uint8_t MISO = 9;
+static const uint8_t SCK = 10;
 
 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;
@@ -34,9 +34,15 @@ static const uint8_t A3 = 4;
 static const uint8_t A4 = 5;
 static const uint8_t A5 = 6;
 
-// LP I2C Pins are fixed on ESP32-C6
+// LP I2C Pins are fixed on ESP32-C5
+static const uint8_t LP_SDA = 2;
+static const uint8_t LP_SCL = 3;
 #define WIRE1_PIN_DEFINED
-static const uint8_t SDA1 = 2;
-static const uint8_t SCL1 = 3;
+#define SDA1 LP_SDA
+#define SCL1 LP_SCL
+
+// LP UART Pins are fixed on ESP32-C5
+static const uint8_t LP_RX = 4;
+static const uint8_t LP_TX = 5;
 
 #endif /* Pins_Arduino_h */