Add enableScenes API in Rainmaker (#7436)

* Added enableScenes API

* Added enableScenes API documentation

* Added enableScenes API to example

Co-authored-by: Jan Procházka <[email protected]>

Author: sanketwadekar

Diff for: docs/source/api/rainmaker.rst

@@ -22,9 +22,6 @@ The key features of ESP RainMaker are:
 
 Additional information about ESP RainMaker can be found `here <https://rainmaker.espressif.com/>`__.
 
-#########################
-Arduino ESP Rainmaker API
-#########################
 
 ESP RainMaker Agent API
 -----------------------
@@ -127,6 +124,21 @@ This function will return
 1. `ESP_OK` : On success
 2. Error in case of failure
 
+RMaker.enableScenes
+*******************
+
+This API enables the Scenes service for the node. It should be called after `RMaker.initNode()` and before `RMaker.start()`.
+For more information, check `here <https://rainmaker.espressif.com/docs/scenes.html>`__.
+
+.. code-block:: arduino
+
+    esp_err_t enableScenes()
+
+This function will return
+
+1. `ESP_OK` : On success
+2. Error in case of failure
+
 RMaker.setTimeZone
 ******************
 

Diff for: libraries/RainMaker/examples/RMakerCustom/RMakerCustom.ino

@@ -26,15 +26,15 @@ static Device my_device("Dimmer", "custom.device.dimmer", &gpio_dimmer);
 
 void sysProvEvent(arduino_event_t *sys_event)
 {
-    switch (sys_event->event_id) {      
+    switch (sys_event->event_id) {
         case ARDUINO_EVENT_PROV_START:
 #if CONFIG_IDF_TARGET_ESP32S2
         Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
         printQR(service_name, pop, "softap");
 #else
         Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
         printQR(service_name, pop, "ble");
-#endif        
+#endif
         break;
         default:;
     }
@@ -63,7 +63,7 @@ void setup()
     pinMode(gpio_dimmer, OUTPUT);
     digitalWrite(gpio_dimmer, DEFAULT_POWER_MODE);
 
-    Node my_node;    
+    Node my_node;
     my_node = RMaker.initNode("ESP RainMaker Node");
 
     //Create custom dimmer device
@@ -78,20 +78,22 @@ void setup()
     my_device.addParam(level_param);
 
     my_device.addCb(write_callback);
-    
-    //Add custom dimmer device to the node   
+
+    //Add custom dimmer device to the node
     my_node.addDevice(my_device);
 
-    //This is optional 
+    //This is optional
     RMaker.enableOTA(OTA_USING_PARAMS);
-    //If you want to enable scheduling, set time zone for your region using setTimeZone(). 
+    //If you want to enable scheduling, set time zone for your region using setTimeZone().
     //The list of available values are provided here https://rainmaker.espressif.com/docs/time-service.html
     // RMaker.setTimeZone("Asia/Shanghai");
     // Alternatively, enable the Timezone service and let the phone apps set the appropriate timezone
     RMaker.enableTZService();
 
     RMaker.enableSchedule();
 
+    RMaker.enableScenes();
+
     RMaker.start();
 
     WiFi.onEvent(sysProvEvent);

Diff for: libraries/RainMaker/examples/RMakerCustomAirCooler/RMakerCustomAirCooler.ino

@@ -43,15 +43,15 @@ static Device my_device("Air Cooler", "my.device.air-cooler", NULL);
 
 void sysProvEvent(arduino_event_t *sys_event)
 {
-    switch (sys_event->event_id) {      
+    switch (sys_event->event_id) {
         case ARDUINO_EVENT_PROV_START:
 #if CONFIG_IDF_TARGET_ESP32S2
         Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
         printQR(service_name, pop, "softap");
 #else
         Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
         printQR(service_name, pop, "ble");
-#endif        
+#endif
         break;
         default:;
     }
@@ -114,7 +114,7 @@ void setup()
     pinMode(gpio_speed, OUTPUT);
     analogWrite(gpio_speed, DEFAULT_SPEED);
 
-    Node my_node;    
+    Node my_node;
     my_node = RMaker.initNode("ESP RainMaker Node");
 
     //Create custom air cooler device
@@ -138,20 +138,22 @@ void setup()
     my_device.addParam(mode_param);
 
     my_device.addCb(write_callback);
-    
-    //Add custom Air Cooler device to the node   
+
+    //Add custom Air Cooler device to the node
     my_node.addDevice(my_device);
 
-    //This is optional 
+    //This is optional
     // RMaker.enableOTA(OTA_USING_PARAMS);
-    //If you want to enable scheduling, set time zone for your region using setTimeZone(). 
+    //If you want to enable scheduling, set time zone for your region using setTimeZone().
     //The list of available values are provided here https://rainmaker.espressif.com/docs/time-service.html
     // RMaker.setTimeZone("Asia/Shanghai");
     //Alternatively, enable the Timezone service and let the phone apps set the appropriate timezone
     // RMaker.enableTZService();
 
     RMaker.enableSchedule();
 
+    RMaker.enableScenes();
+
     RMaker.start();
 
     WiFi.onEvent(sysProvEvent);

Diff for: libraries/RainMaker/examples/RMakerSonoffDualR3/RMakerSonoffDualR3.ino

@@ -136,6 +136,7 @@ void setup()
     // Alternatively, enable the Timezone service and let the phone apps set the appropriate timezone
     RMaker.enableTZService();
     RMaker.enableSchedule();
+    RMaker.enableScenes();
 
     //Service Name
     for(int i=0; i<17; i=i+8) {

Diff for: libraries/RainMaker/examples/RMakerSwitch/RMakerSwitch.ino

@@ -81,6 +81,8 @@ void setup()
 
     RMaker.enableSchedule();
 
+    RMaker.enableScenes();
+
     RMaker.start();
 
     WiFi.onEvent(sysProvEvent);

Diff for: libraries/RainMaker/src/RMaker.cpp

@@ -3,6 +3,7 @@
 #include "RMaker.h"
 #include <esp_rmaker_schedule.h>
 #include <esp_rmaker_utils.h>
+#include <esp_rmaker_scenes.h>
 bool wifiLowLevelInit(bool persistent);
 static esp_err_t err;
 
@@ -28,12 +29,12 @@ static void event_handler(void *arg, esp_event_base_t event_base, int32_t event_
                 log_i("Unhandled RainMaker Event:");
         }
     } else if (event_base == RMAKER_OTA_EVENT) {
-        if(event_data == NULL){
+        if (event_data == NULL) {
             event_data = (void*)"";
         }
         switch(event_id) {
             case RMAKER_OTA_EVENT_STARTING:
-                log_i("Starting OTA : %s", (char*)event_data);
+                log_i("Starting OTA");
                 break;
             case RMAKER_OTA_EVENT_IN_PROGRESS:
                 log_i("OTA in progress : %s", (char*)event_data);
@@ -146,5 +147,13 @@ esp_err_t RMakerClass::enableOTA(ota_type_t type, const char *cert)
     return err;
 }
 
+esp_err_t RMakerClass::enableScenes()
+{
+    err = esp_rmaker_scenes_enable();
+    if (err != ESP_OK) {
+        log_e("Scenes enable failed");
+    }
+    return err;
+}
 RMakerClass RMaker;
 #endif

Diff for: libraries/RainMaker/src/RMaker.h

@@ -25,16 +25,17 @@ class RMakerClass
 {
     private:
         esp_rmaker_config_t rainmaker_cfg = {false};
-      
+
     public:
-    
+
         void setTimeSync(bool val);
         Node initNode(const char *name, const char *type = "ESP RainMaker with Arduino");
         esp_err_t deinitNode(Node node);
         esp_err_t setTimeZone(const char *tz = "Asia/Shanghai");
         esp_err_t enableSchedule();
         esp_err_t enableTZService();
         esp_err_t enableOTA(ota_type_t type, const char *cert = ESP_RMAKER_OTA_DEFAULT_SERVER_CERT);
+        esp_err_t enableScenes();
         esp_err_t start();
         esp_err_t stop();
 };