updated Deneyap boards pin_arduino.h files (#7338)

* Add new board (Deneyap Kart 1A)

* Update pins_arduino.h

* Add newly  board (Deneyap Kart G)

New Deneyap Family member, wearable development board

* updated Deneyap boards pin_arduino.h files

* Update boards.txt

* Update pins_arduino.h

* updated deneyap boards pins_arduino.h

* updated Deneyap boards variants files

* updated Deneyap boards pins_arduino.h

Co-authored-by: Jan Procházka <[email protected]>

Author: zeynepdicle

Diff for: boards.txt

@@ -16361,7 +16361,7 @@ deneyapkart1A.menu.CPUFreq.80=80MHz (WiFi/BT)
 deneyapkart1A.menu.CPUFreq.80.build.f_cpu=80000000L
 deneyapkart1A.menu.CPUFreq.40=40MHz
 deneyapkart1A.menu.CPUFreq.40.build.f_cpu=40000000L
-deneyapkart1A.menu.CPUFreq.20=20MHz 
+deneyapkart1A.menu.CPUFreq.20=20MHz
 deneyapkart1A.menu.CPUFreq.20.build.f_cpu=20000000L
 deneyapkart1A.menu.CPUFreq.10=10MHz
 deneyapkart1A.menu.CPUFreq.10.build.f_cpu=10000000L
@@ -16448,7 +16448,7 @@ deneyapkartg.build.variant=deneyapkartg
 deneyapkartg.build.board=DYG
 deneyapkartg.build.bootloader_addr=0x0
 
-deneyapkartg.build.cdc_on_boot=1
+deneyapkartg.build.cdc_on_boot=0
 deneyapkartg.build.f_cpu=160000000L
 deneyapkartg.build.flash_size=4MB
 deneyapkartg.build.flash_freq=80m
@@ -16466,7 +16466,7 @@ deneyapkartg.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5
 deneyapkartg.menu.PartitionScheme.default.build.partitions=default
 deneyapkartg.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
 deneyapkartg.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
-deneyapkartg.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
+deneyapkartg.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
 deneyapkartg.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
 deneyapkartg.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
 deneyapkartg.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
@@ -16489,10 +16489,10 @@ deneyapkartg.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
 deneyapkartg.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
 deneyapkartg.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
 deneyapkartg.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
-deneyapkartg.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
+deneyapkartg.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
 deneyapkartg.menu.PartitionScheme.fatflash.build.partitions=ffat
 deneyapkartg.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
-deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
+deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
 deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
 deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
 deneyapkartg.menu.PartitionScheme.rainmaker=RainMaker
@@ -16567,6 +16567,11 @@ deneyapkartg.menu.DebugLevel.debug.build.code_debug=4
 deneyapkartg.menu.DebugLevel.verbose=Verbose
 deneyapkartg.menu.DebugLevel.verbose.build.code_debug=5
 
+deneyapkartg.menu.EraseFlash.none=Disabled
+deneyapkartg.menu.EraseFlash.none.upload.erase_cmd=
+deneyapkartg.menu.EraseFlash.all=Enabled
+deneyapkartg.menu.EraseFlash.all.upload.erase_cmd=-e
+
 ##############################################################
 
 esp32-trueverit-iot-driver.name=Trueverit ESP32 Universal IoT Driver

Diff for: variants/deneyapkart/pins_arduino.h

@@ -11,6 +11,18 @@
 #define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
 #define digitalPinHasPWM(p)         (p < 34)
 
+static const uint8_t LEDR	= 3;
+static const uint8_t LEDG	= 1;
+static const uint8_t LEDB	= 4;
+static const uint8_t GPKEY	= 0;
+
+#define BUILTIN_LED LEDB
+#define LED_BUILTIN BUILTIN_LED // backward compatibility
+//#define RGB_BUILTIN LED_BUILTIN
+
+#define KEY_BUILTIN GPKEY
+#define BUILTIN_KEY KEY_BUILTIN
+
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;
 
@@ -87,12 +99,6 @@ static const uint8_t CAMXC = 32;
 static const uint8_t CAMH  = 39;
 static const uint8_t CAMV  = 36;
 
-static const uint8_t LEDR 		 = 3;
-static const uint8_t LEDG 		 = 1;
-static const uint8_t LEDB 		 = 4;
-static const uint8_t BUILTIN_KEY = 0;
-static const uint8_t GPKEY		 = 0;
-
 static const uint8_t PWM0 = 23;
 static const uint8_t PWM1 = 22;
 

Diff for: variants/deneyapkart1A/pins_arduino.h

@@ -11,6 +11,15 @@
 #define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
 #define digitalPinHasPWM(p)         (p < 34)
 
+static const uint8_t RGBLED  = 13;
+static const uint8_t GPKEY  = 0;
+
+#define RGB_BUILTIN RGBLED
+#define RGB_BRIGHTNESS 64
+
+#define KEY_BUILTIN GPKEY
+#define BUILTIN_KEY KEY_BUILTIN
+
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;
 
@@ -87,10 +96,6 @@ static const uint8_t CAMXC = 32;
 static const uint8_t CAMH  = 39;
 static const uint8_t CAMV  = 36;
 
-static const uint8_t RGBLED  = 13;
-static const uint8_t BUILTIN_KEY  = 0;
-static const uint8_t GPKEY  = 0;
-
 static const uint8_t PWM0 = 23;
 static const uint8_t PWM1 = 22;
 

Diff for: variants/deneyapkartg/pins_arduino.h

@@ -11,10 +11,17 @@
 #define digitalPinToInterrupt(p)    (((p)<NUM_DIGITAL_PINS)?(p):-1)
 #define digitalPinHasPWM(p)         (p < EXTERNAL_NUM_INTERRUPTS)
 
-static const uint8_t KEY_BUILTIN = 9;
+static const uint8_t RGBLED  = 10;
+static const uint8_t GPKEY  = 9;
 
-static const uint8_t TX = 21;
-static const uint8_t RX = 20;
+#define RGB_BUILTIN RGBLED
+#define RGB_BRIGHTNESS 64
+
+#define KEY_BUILTIN GPKEY
+#define BUILTIN_KEY KEY_BUILTIN
+
+static const uint8_t TX = 20;
+static const uint8_t RX = 21;
 
 static const uint8_t SDA = 8;
 static const uint8_t SCL = 2;
@@ -39,4 +46,7 @@ static const uint8_t D4 = 8;
 static const uint8_t D5 = 7;
 static const uint8_t D6 = 2;
 
-#endif /* Pins_Arduino_h */
+static const uint8_t PWM0 = 0;
+static const uint8_t PWM1 = 1;
+
+#endif /* Pins_Arduino_h */

Diff for: variants/deneyapmini/pins_arduino.h

@@ -2,6 +2,7 @@
 #define Pins_Arduino_h
 
 #include <stdint.h>
+#include "soc/soc_caps.h"
 
 #define EXTERNAL_NUM_INTERRUPTS 46
 #define NUM_DIGITAL_PINS        48
@@ -11,7 +12,17 @@
 #define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
 #define digitalPinHasPWM(p)         (p < 46)
 
-static const uint8_t KEY_BUILTIN = 0;
+static const uint8_t LEDR	= 34;
+static const uint8_t LEDG	= 33;
+static const uint8_t LEDB	= 35;
+static const uint8_t GPKEY	= 0;
+
+#define KEY_BUILTIN GPKEY
+#define BUILTIN_KEY KEY_BUILTIN
+
+#define BUILTIN_LED LEDB
+#define LED_BUILTIN BUILTIN_LED // backward compatibility
+//#define RGB_BUILTIN LED_BUILTIN
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
@@ -24,43 +35,38 @@ static const uint8_t MOSI  = 40;
 static const uint8_t MISO  = 39;
 static const uint8_t SCK   = 38;
 
-static const uint8_t A0 = 1;
-static const uint8_t A1 = 2;
-static const uint8_t A2 = 3;
-static const uint8_t A3 = 4;
-static const uint8_t A4 = 5;
-static const uint8_t A5 = 6;
-static const uint8_t A6 = 7;
-static const uint8_t A7 = 8;
-static const uint8_t A8 = 9;
-static const uint8_t A9 = 10;
-static const uint8_t A10 = 11;
-static const uint8_t A11 = 12;
-static const uint8_t A12 = 13;
-static const uint8_t A13 = 14;
-static const uint8_t A14 = 15;
-static const uint8_t A15 = 16;
-static const uint8_t A16 = 17;
-static const uint8_t A17 = 18;
-static const uint8_t A18 = 19;
-static const uint8_t A19 = 20;
+static const uint8_t A0 = 8;
+static const uint8_t A1 = 9;
+static const uint8_t A2 = 10;
+static const uint8_t A3 = 11;
+static const uint8_t A4 = 12;
+static const uint8_t A5 = 13;
 
-static const uint8_t T1 = 1;
-static const uint8_t T2 = 2;
-static const uint8_t T3 = 3;
-static const uint8_t T4 = 4;
-static const uint8_t T5 = 5;
-static const uint8_t T6 = 6;
-static const uint8_t T7 = 7;
-static const uint8_t T8 = 8;
-static const uint8_t T9 = 9;
-static const uint8_t T10 = 10;
-static const uint8_t T11 = 11;
-static const uint8_t T12 = 12;
-static const uint8_t T13 = 13;
-static const uint8_t T14 = 14;
+static const uint8_t T1 = 8;
+static const uint8_t T2 = 9;
+static const uint8_t T3 = 10;
+static const uint8_t T4 = 11;
+static const uint8_t T5 = 12;
+static const uint8_t T6 = 13;
 
 static const uint8_t DAC1 = 17;
 static const uint8_t DAC2 = 18;
 
-#endif /* Pins_Arduino_h */
+static const uint8_t D1 = 44;
+static const uint8_t D2 = 43;
+static const uint8_t D3 = 42;
+static const uint8_t D4 = 40;
+static const uint8_t D5 = 39;
+static const uint8_t D6 = 38;
+static const uint8_t D7 = 37;
+static const uint8_t D8 = 36;
+static const uint8_t D9 = 26;
+static const uint8_t D10 = 21;
+static const uint8_t D11 = 18;
+static const uint8_t D12 = 17;
+static const uint8_t D13 = 0;
+static const uint8_t D14 = 35;
+static const uint8_t D15 = 33;
+static const uint8_t D16 = 34;
+
+#endif /* Pins_Arduino_h */