Removed getter implementation and commented usage in examples

Author: PilnyTomas

Diff for: libraries/SD_MMC/examples/SDMMC_Test/SDMMC_Test.ino

@@ -225,11 +225,14 @@ void setup(){
     }
 #endif
 
+/*
+// This is waiting for implementation in peripheral manager (periman)
     if(use_1_bit_mode){
         Serial.printf("Begin in 1-bit mode; pins: CLK=%d, CMD=%d, D0=%d\n", SD_MMC.getClkPin(), SD_MMC.getCmdPin(), SD_MMC.getD0Pin());
     }else{
         Serial.printf("Begin in 4-bit mode; pins: CLK=%d, CMD=%d, D0=%d, D1=%d, D2=%d, D3=%d\n", SD_MMC.getClkPin(), SD_MMC.getCmdPin(), SD_MMC.getD0Pin(), SD_MMC.getD1Pin(), SD_MMC.getD2Pin(), SD_MMC.getD3Pin());
     }
+*/
 
     if(!SD_MMC.begin("/sdcard", use_1_bit_mode)){
         Serial.println("Card Mount Failed.");

Diff for: libraries/SD_MMC/examples/SDMMC_time/SDMMC_time.ino

@@ -228,11 +228,14 @@ void setup(){
     }
 #endif
 
+/*
+// This is waiting for implementation in peripheral manager (periman)
     if(use_1_bit_mode){
         Serial.printf("Begin in 1-bit mode; pins: CLK=%d, CMD=%d, D0=%d\n", SD_MMC.getClkPin(), SD_MMC.getCmdPin(), SD_MMC.getD0Pin());
     }else{
         Serial.printf("Begin in 4-bit mode; pins: CLK=%d, CMD=%d, D0=%d, D1=%d, D2=%d, D3=%d\n", SD_MMC.getClkPin(), SD_MMC.getCmdPin(), SD_MMC.getD0Pin(), SD_MMC.getD1Pin(), SD_MMC.getD2Pin(), SD_MMC.getD3Pin());
     }
+*/
 
     if(!SD_MMC.begin("/sdcard", use_1_bit_mode)){
         Serial.println("Card Mount Failed.");

Diff for: libraries/SD_MMC/src/SD_MMC.cpp

@@ -102,60 +102,6 @@ bool SDMMCFS::setPins(int clk, int cmd, int d0, int d1, int d2, int d3)
 #endif
 }
 
-int SDMMCFS::getClkPin()
-{
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
-    return _pin_clk;
-#elif CONFIG_IDF_TARGET_ESP32
-    return SDMMC_SLOT1_IOMUX_PIN_NUM_CLK;
-#endif
-}
-
-int SDMMCFS::getCmdPin()
-{
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
-    return _pin_cmd;
-#elif CONFIG_IDF_TARGET_ESP32
-    return SDMMC_SLOT1_IOMUX_PIN_NUM_CMD;
-#endif
-}
-
-int SDMMCFS::getD0Pin()
-{
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
-    return _pin_d0;
-#elif CONFIG_IDF_TARGET_ESP32
-    return SDMMC_SLOT1_IOMUX_PIN_NUM_D0;
-#endif
-}
-
-int SDMMCFS::getD1Pin()
-{
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
-    return _pin_d1;
-#elif CONFIG_IDF_TARGET_ESP32
-    return SDMMC_SLOT1_IOMUX_PIN_NUM_D1;
-#endif
-}
-
-int SDMMCFS::getD2Pin()
-{
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
-    return _pin_d2;
-#elif CONFIG_IDF_TARGET_ESP32
-    return SDMMC_SLOT1_IOMUX_PIN_NUM_D2;
-#endif
-}
-
-int SDMMCFS::getD3Pin()
-{
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
-    return _pin_d3;
-#elif CONFIG_IDF_TARGET_ESP32
-    return SDMMC_SLOT1_IOMUX_PIN_NUM_D3;
-#endif
-}
-
 bool SDMMCFS::begin(const char * mountpoint, bool mode1bit, bool format_if_mount_failed, int sdmmc_frequency, uint8_t maxOpenFiles)
 {
     if(_card) {

Diff for: libraries/SD_MMC/src/SD_MMC.h

@@ -48,12 +48,6 @@ class SDMMCFS : public FS
     SDMMCFS(FSImplPtr impl);
     bool setPins(int clk, int cmd, int d0);
     bool setPins(int clk, int cmd, int d0, int d1, int d2, int d3);
-    int getClkPin();
-    int getCmdPin();
-    int getD0Pin();
-    int getD1Pin();
-    int getD2Pin();
-    int getD3Pin();
     bool begin(const char * mountpoint="/sdcard", bool mode1bit=false, bool format_if_mount_failed=false, int sdmmc_frequency=BOARD_MAX_SDMMC_FREQ, uint8_t maxOpenFiles = 5);
     void end();
     sdcard_type_t cardType();