Issue-report.yml

name: Issue report
description: Report any problem here
labels: ["Status: Awaiting triage"]
body:
  - type: markdown
    attributes:
      value: |
        * Please note that we can only process issues reported in English to ensure effective communication and support. Issues written in other languages will be closed, with a request to rewrite them in English.
        * Before reporting a new issue please check and search in [List of existing issues](https://github.com/espressif/arduino-esp32/issues?q=is%3Aissue)
        * Please check [Online Documentation](https://docs.espressif.com/projects/arduino-esp32/en/latest/index.html)
        * Take a look on [Troubleshooting guide](https://docs.espressif.com/projects/arduino-esp32/en/latest/troubleshooting.html)
        * If still experiencing the issue, please provide as many details as possible below about your hardware, computer setup and code.
  - type: input
    id: Board
    attributes:
      label: Board
      description: On which Board does this issue occur?
      placeholder: eg. ESP32 Dev Module, ESP32-S2, LilyGo TTGO LoRa32...
    validations:
      required: true
  - type: textarea
    id: devboard
    attributes:
      label: Device Description
      description: What development board or other hardware is the chip attached to?
      placeholder: ex. DevKitC, plain module on breadboard, etc. If your hardware is custom or unusual, please attach a photo.
    validations:
      required: true
  - type: textarea
    id: other-hw
    attributes:
      label: Hardware Configuration
      description: Is anything else attached to the development board?
      placeholder: ex. GPIO 18 & 19 are connected to I2C devices.
    validations:
      required: true
  - type: dropdown
    id: version
    attributes:
      label: Version
      description: What version of Arduino ESP32 are you running? If possible, consider updating to the latest version.
      options:
        - latest stable Release (if not listed below)
        - latest development Release Candidate (RC-X)
        - latest master (checkout manually)
        - v3.2.0
        - v3.1.3
        - v3.1.2
        - v3.1.1
        - v3.1.0
        - v3.0.7
        - v3.0.6
        - v3.0.5
        - v3.0.4
        - v3.0.3
        - v3.0.2
        - v3.0.1
        - v3.0.0
        - v2.0.17
        - v2.0.16
        - v2.0.15
        - v2.0.14
        - v2.0.13
        - v2.0.12
        - v2.0.11
        - v2.0.10
        - v2.0.9
        - v2.0.8
        - v2.0.7
        - v2.0.6
        - v2.0.5
        - v2.0.4
        - v2.0.3
        - v2.0.2
        - v2.0.1
        - v2.0.0
        - v1.0.6
        - other
    validations:
      required: true
  - type: input
    id: IDE
    attributes:
     label: IDE Name
     description: What IDE are you using?
     placeholder: eg. Arduino IDE, VSCode, Sloeber...
    validations:
      required: true
  - type: input
    id: os
    attributes:
      label: Operating System
      description: On which OS does this issue occur?
      placeholder: ex. macOS 12.1, Windows 10...
    validations:
      required: true
  - type: input
    id: Flash
    attributes:
      label: Flash frequency
      description: What flash frequency is used?
      placeholder: eg. 40Mhz
    validations:
      required: true
  - type: dropdown
    id: PSRAM
    attributes:
      label: PSRAM enabled
      description: Is PSRAM enabled?
      options:
        - "yes"
        - "no"
    validations:
      required: true
  - type: input
    id: Upload
    attributes:
      label: Upload speed
      description: What upload speed is used?
      placeholder: eg. 115200
    validations:
      required: true
  - type: textarea
    id: Description
    attributes:
      label: Description
      description: Please describe your problem here and expected behavior
      placeholder: ex. Can't connect/weird behavior/wrong function/missing parameter..
    validations:
      required: true
  - type: textarea
    id: sketch
    attributes:
      label: Sketch
      description: Please provide full minimal sketch/code which can be run to reproduce your issue
      placeholder: ex. Related part of the code to replicate the issue
      render: cpp
    validations:
      required: true
  - type: textarea
    id: Debug
    attributes:
      label: Debug Message
      description: Please provide a debug message or error message. If you have a Guru Meditation Error or Backtrace, please decode it with [ExceptionDecoder](https://github.com/me-no-dev/EspExceptionDecoder)
      placeholder: Enable Core debug level - Debug on tools menu of Arduino IDE, then put the serial output here.
      render: plain
    validations:
      required: true
  - type: textarea
    id: other-remarks
    attributes:
      label: Other Steps to Reproduce
      description: Is there any other information you can think of which will help us reproduce this problem? Any additional info can be added as well.
      placeholder: ex. I also tried on other OS, HW...it works correctly on that setup.
  - type: checkboxes
    id: confirmation
    attributes:
      label: I have checked existing issues, online documentation and the Troubleshooting Guide
      description: You agree to check all the resources above before opening a new issue.
      options:
        - label: I confirm I have checked existing issues, online documentation and Troubleshooting guide.
          required: true