ArduinoOTA.cpp

// Copyright 2024 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at

//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#ifndef LWIP_OPEN_SRC
#define LWIP_OPEN_SRC
#endif
#include <functional>
#include "ArduinoOTA.h"
#include "NetworkClient.h"
#include "ESPmDNS.h"
#include "MD5Builder.h"
#include "Update.h"

// #define OTA_DEBUG Serial

ArduinoOTAClass::ArduinoOTAClass()
  : _port(0), _initialized(false), _rebootOnSuccess(true), _mdnsEnabled(true), _state(OTA_IDLE), _size(0), _cmd(0), _ota_port(0), _ota_timeout(1000),
    _start_callback(NULL), _end_callback(NULL), _error_callback(NULL), _progress_callback(NULL) {}

ArduinoOTAClass::~ArduinoOTAClass() {
  _udp_ota.stop();
}

ArduinoOTAClass &ArduinoOTAClass::onStart(THandlerFunction fn) {
  _start_callback = fn;
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::onEnd(THandlerFunction fn) {
  _end_callback = fn;
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::onProgress(THandlerFunction_Progress fn) {
  _progress_callback = fn;
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::onError(THandlerFunction_Error fn) {
  _error_callback = fn;
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::setPort(uint16_t port) {
  if (!_initialized && !_port && port) {
    _port = port;
  }
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::setHostname(const char *hostname) {
  if (!_initialized && !_hostname.length() && hostname) {
    _hostname = hostname;
  }
  return *this;
}

String ArduinoOTAClass::getHostname() {
  return _hostname;
}

ArduinoOTAClass &ArduinoOTAClass::setPassword(const char *password) {
  if (_state == OTA_IDLE && password) {
    MD5Builder passmd5;
    passmd5.begin();
    passmd5.add(password);
    passmd5.calculate();
    _password.clear();
    _password = passmd5.toString();
  }
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::setPasswordHash(const char *password) {
  if (_state == OTA_IDLE && password) {
    _password.clear();
    _password = password;
  }
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::setPartitionLabel(const char *partition_label) {
  if (_state == OTA_IDLE && partition_label) {
    _partition_label.clear();
    _partition_label = partition_label;
  }
  return *this;
}

String ArduinoOTAClass::getPartitionLabel() {
  return _partition_label;
}

ArduinoOTAClass &ArduinoOTAClass::setRebootOnSuccess(bool reboot) {
  _rebootOnSuccess = reboot;
  return *this;
}

ArduinoOTAClass &ArduinoOTAClass::setMdnsEnabled(bool enabled) {
  _mdnsEnabled = enabled;
  return *this;
}

void ArduinoOTAClass::begin() {
  if (_initialized) {
    log_w("already initialized");
    return;
  }

  if (!_port) {
    _port = 3232;
  }

  if (!_udp_ota.begin(_port)) {
    log_e("udp bind failed");
    return;
  }

  if (!_hostname.length()) {
    char tmp[20];
    uint8_t mac[6];
    Network.macAddress(mac);
    sprintf(tmp, "esp32-%02x%02x%02x%02x%02x%02x", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
    _hostname = tmp;
  }
#ifdef CONFIG_MDNS_MAX_INTERFACES
  if (_mdnsEnabled) {
    MDNS.begin(_hostname.c_str());
    MDNS.enableArduino(_port, (_password.length() > 0));
  }
#endif
  _initialized = true;
  _state = OTA_IDLE;
  log_i("OTA server at: %s.local:%u", _hostname.c_str(), _port);
}

int ArduinoOTAClass::parseInt() {
  char data[INT_BUFFER_SIZE];
  uint8_t index = 0;
  char value;
  while (_udp_ota.peek() == ' ') {
    _udp_ota.read();
  }
  while (index < INT_BUFFER_SIZE - 1) {
    value = _udp_ota.peek();
    if (value < '0' || value > '9') {
      data[index++] = '\0';
      return atoi(data);
    }
    data[index++] = _udp_ota.read();
  }
  return 0;
}

String ArduinoOTAClass::readStringUntil(char end) {
  String res = "";
  int value;
  while (true) {
    value = _udp_ota.read();
    if (value <= 0 || value == end) {
      return res;
    }
    res += (char)value;
  }
  return res;
}

void ArduinoOTAClass::_onRx() {
  if (_state == OTA_IDLE) {
    int cmd = parseInt();
    if (cmd != U_FLASH && cmd != U_SPIFFS) {
      return;
    }
    _cmd = cmd;
    _ota_port = parseInt();
    _size = parseInt();
    _udp_ota.read();
    _md5 = readStringUntil('\n');
    _md5.trim();
    if (_md5.length() != 32) {
      log_e("bad md5 length");
      return;
    }

    if (_password.length()) {
      MD5Builder nonce_md5;
      nonce_md5.begin();
      nonce_md5.add(String(micros()));
      nonce_md5.calculate();
      _nonce = nonce_md5.toString();

      _udp_ota.beginPacket(_udp_ota.remoteIP(), _udp_ota.remotePort());
      _udp_ota.printf("AUTH %s", _nonce.c_str());
      _udp_ota.endPacket();
      _state = OTA_WAITAUTH;
      return;
    } else {
      _udp_ota.beginPacket(_udp_ota.remoteIP(), _udp_ota.remotePort());
      _udp_ota.print("OK");
      _udp_ota.endPacket();
      _ota_ip = _udp_ota.remoteIP();
      _state = OTA_RUNUPDATE;
    }
  } else if (_state == OTA_WAITAUTH) {
    int cmd = parseInt();
    if (cmd != U_AUTH) {
      log_e("%d was expected. got %d instead", U_AUTH, cmd);
      _state = OTA_IDLE;
      return;
    }
    _udp_ota.read();
    String cnonce = readStringUntil(' ');
    String response = readStringUntil('\n');
    if (cnonce.length() != 32 || response.length() != 32) {
      log_e("auth param fail");
      _state = OTA_IDLE;
      return;
    }

    String challenge = _password + ":" + String(_nonce) + ":" + cnonce;
    MD5Builder _challengemd5;
    _challengemd5.begin();
    _challengemd5.add(challenge);
    _challengemd5.calculate();
    String result = _challengemd5.toString();

    if (result.equals(response)) {
      _udp_ota.beginPacket(_udp_ota.remoteIP(), _udp_ota.remotePort());
      _udp_ota.print("OK");
      _udp_ota.endPacket();
      _ota_ip = _udp_ota.remoteIP();
      _state = OTA_RUNUPDATE;
    } else {
      _udp_ota.beginPacket(_udp_ota.remoteIP(), _udp_ota.remotePort());
      _udp_ota.print("Authentication Failed");
      log_w("Authentication Failed");
      _udp_ota.endPacket();
      if (_error_callback) {
        _error_callback(OTA_AUTH_ERROR);
      }
      _state = OTA_IDLE;
    }
  }
}

void ArduinoOTAClass::_runUpdate() {
  const char *partition_label = _partition_label.length() ? _partition_label.c_str() : NULL;
  if (!Update.begin(_size, _cmd, -1, LOW, partition_label)) {

    log_e("Begin ERROR: %s", Update.errorString());

    if (_error_callback) {
      _error_callback(OTA_BEGIN_ERROR);
    }
    _state = OTA_IDLE;
    return;
  }
  Update.setMD5(_md5.c_str());

  if (_start_callback) {
    _start_callback();
  }
  if (_progress_callback) {
    _progress_callback(0, _size);
  }

  NetworkClient client;
  if (!client.connect(_ota_ip, _ota_port)) {
    if (_error_callback) {
      _error_callback(OTA_CONNECT_ERROR);
    }
    _state = OTA_IDLE;
  }

  uint32_t written = 0, total = 0, tried = 0;

  while (!Update.isFinished() && client.connected()) {
    size_t waited = _ota_timeout;
    size_t available = client.available();
    while (!available && waited) {
      delay(1);
      waited -= 1;
      available = client.available();
    }
    if (!waited) {
      if (written && tried++ < 3) {
        log_i("Try[%u]: %u", tried, written);
        if (!client.printf("%lu", written)) {
          log_e("failed to respond");
          _state = OTA_IDLE;
          break;
        }
        continue;
      }
      log_e("Receive Failed");
      if (_error_callback) {
        _error_callback(OTA_RECEIVE_ERROR);
      }
      _state = OTA_IDLE;
      Update.abort();
      return;
    }
    if (!available) {
      log_e("No Data: %u", waited);
      _state = OTA_IDLE;
      break;
    }
    tried = 0;
    static uint8_t buf[1460];
    if (available > 1460) {
      available = 1460;
    }
    size_t r = client.read(buf, available);
    if (r != available) {
      log_w("didn't read enough! %u != %u", r, available);
      if ((int32_t)r < 0) {
        delay(1);
        continue;  //let's not try to write 4 gigabytes when client.read returns -1
      }
    }

    written = Update.write(buf, r);
    if (written > 0) {
      if (written != r) {
        log_w("didn't write enough! %u != %u", written, r);
      }
      if (!client.printf("%lu", written)) {
        log_w("failed to respond");
      }
      total += written;
      if (_progress_callback) {
        _progress_callback(total, _size);
      }
    } else {
      log_e("Write ERROR: %s", Update.errorString());
    }
  }

  if (Update.end()) {
    client.print("OK");
    client.stop();
    delay(10);
    if (_end_callback) {
      _end_callback();
    }
    if (_rebootOnSuccess) {
      //let serial/network finish tasks that might be given in _end_callback
      delay(100);
      ESP.restart();
    }
  } else {
    if (_error_callback) {
      _error_callback(OTA_END_ERROR);
    }
    Update.printError(client);
    client.stop();
    delay(10);
    log_e("Update ERROR: %s", Update.errorString());
    _state = OTA_IDLE;
  }
}

void ArduinoOTAClass::end() {
  _initialized = false;
  _udp_ota.stop();
#ifdef CONFIG_MDNS_MAX_INTERFACES
  if (_mdnsEnabled) {
    MDNS.end();
  }
#endif
  _state = OTA_IDLE;
  log_i("OTA server stopped.");
}

void ArduinoOTAClass::handle() {
  if (!_initialized) {
    return;
  }
  if (_state == OTA_RUNUPDATE) {
    _runUpdate();
    _state = OTA_IDLE;
  }
  if (_udp_ota.parsePacket()) {
    _onRx();
  }
  _udp_ota.clear();  // always clear, even zero length packets must be cleared.
}

int ArduinoOTAClass::getCommand() {
  return _cmd;
}

void ArduinoOTAClass::setTimeout(int timeoutInMillis) {
  _ota_timeout = timeoutInMillis;
}

#if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_ARDUINOOTA)
ArduinoOTAClass ArduinoOTA;
#endif