forked from FirebaseExtended/firebase-arduino
-
Notifications
You must be signed in to change notification settings - Fork 2
/
Copy pathFirebaseSerialHost_ESP8266.ino
67 lines (57 loc) · 1.97 KB
/
FirebaseSerialHost_ESP8266.ino
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
//
// Copyright 2015 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
// A sample that will start our serial transciever listening on a software
// port and allow debug over the main serial port.
//
// A suggested setup for testing this example would be a USB to TTL cable
// with the green wire connected to pin 5 and the white wire connected to
// pin 4 (on the huzzah feather esp8266).
// First edit begin.txt and put in your host and secret.
// Then run the following commands to setup the serial port in linux:
// stty -F /dev/ttyUSB0 9600 raw -echo -echoe -echok
// Then on one console do:
// cat /dev/ttyUSB0 &
// This console will now read all responses from the modem. Then do:
// cat begin.txt > /dev/ttyUSB0
// You should see +OK and you can now feed in the other example commmands.
#include <SoftwareSerial.h>
#include <ESP8266WiFi.h>
#include <Firebase.h>
#include <SerialTransceiver.h>
SoftwareSerial data_serial(5 /*RX*/, 4/*TX*/);
firebase::modem::SerialTransceiver transceiver;
void setup() {
Serial.begin(9600);
// connect to wifi.
WiFi.begin("SSID", "PASSWORD");
Serial.print("connecting");
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".");
delay(500);
}
Serial.println();
Serial.print("connected: ");
Serial.println(WiFi.localIP());
data_serial.begin(9600);
while (!data_serial) {
Serial.println("Error initilizing serial.");
delay(5000);
}
transceiver.begin(&data_serial);
}
void loop() {
transceiver.loop();
}